PN: 1725-36036-001_D.doc 21
Downloading and Uploading Configuration Plans Once your configuration plans are established, the settings are easily
downloaded into the handsets.
Downloading a configuration plan to a handset
1. Place a SpectraLink Wireless Telephone with the Battery Pack
removed into the appropriate slot.
2. Use the Open button located in the file management section on the
toolbar to open the System, Group and User cfg files for this handset.
3. In the Editable settings fields, enter information unique to the
handset – Extension and IP address (if using static IP). Note that
these two fields have a Next button that is useful for setting these
fields when configuring a quantity of handsets.
4. Copy the settings to the Phone settings fields using the Copy settings
right arrow.
5. Click Write Phone to begin the download.
You may want to save the configuration, load new files or edit
settings for the next handset (steps 1 and 2) during the download.
6. (Conditional) If you wish to save the settings unique to this
handset, enter the identifying information into the filename fields,
such as user name or extension number and then click Save.
7. When the Active flag turns off, the download has finished and the
handset may be removed from the Cradle.
Uploading a configuration plan from a handset
1. Place a SpectraLink Wireless Telephone with the Battery Pack
removed into the appropriate slot.
2. Click the Read Phone button to begin the upload.
3. When the Active flag turns off, the handset’s settings will appear in
the Phone settings fields.
6