Polycom IP 4000 quick start Installation

Installation

Installing and Connecting to the Network

To install the SoundStation IP

4000 and connect it to the network, complete the following steps:

1 Place the SoundStation IP 4000 on a flat surface (such as a conference room table or desktop), with a power outlet and a data network port nearby.

2 Connect one end of the 6 ft. data cable to your data network port.

Connect the other end to the network (LAN) port on the Power Interface Module.

3 Connect the 25 ft. data cable to the RJ-45 port on the bottom of the SoundStation IP. (The other end of this cable is pre-plugged into the PIM.)

4 Connect the power adapter to the AC adapter port on the PIM.

5Plug the other end into a standard electrical power outlet in the wall.

SoundStation® IP 4000 Quick Start Guide