MONITORS
1.When sending a course, the front monitor displays the teacher and should be facing the teacher so that he/she can see what the far site is seeing and the back monitor displays the far site so that the teacher can see his/her students.
2.When receiving a course, usually the front monitor shows the teacher and the back monitor displays a self view. The content can be displayed on the front monitor (instead of the teacher) or through the LCD projector.
3.What is displayed in the
4.To show, move, or turn off the PIP during a call, press the PIP on the remote control.
5.While the PIP has a yellow border, press PIP repeatedly to move it to different corners of the screen.
6.After a brief pause, the PIP border turns blue. After the border turns blue, press PIP to turn the PIP off.
7.If the PIP is not showing, press IP on the remote control and then press Near twice and select the Swap PIP icon.
8.To specify when the system displays the PIP, select System from the Place a Call screen, then select User Settings, scroll to PIP, select a setting (explained below), press Enter on the remote control, then press Home to save any changes and return to the home screen.
9.There are four settings from which to choose: selecting Camera will show the PIP when any of the camera control buttons are pressed; selecting Auto will show the PIP on connection and when the remote control is picked up; selecting On will show the PIP on connection and during the call; and Off will show the PIP only when PIP is pressed on the remote control.
7
