900007 - 02-28-01.QXD 9/26/02 11:46 AM Page 3

9.USE SAFETY GLASSES. Wear safety glasses or goggles while operating power tools. Also face or dust mask if operation creates dust. All persons in the area where power tools are being operated should also wear safety glasses and face or dust mask.

10.DON’T ABUSE CORD. Never carry tool by cord or yank it to disconnect from receptacle. Keep cord from heat, oil, and sharp edges. Have damaged or worn power cord and strain reliever replaced immediately. DO NOT ATTEMPT TO REPAIR POWER CORD.

11.SECURE WORK. Use clamps or a vise to hold work. It’s safer than using your hand and it frees both hands to operate tool.

12.DON’T OVERREACH. Keep proper footing and balance at all times.

13.MAINTAIN TOOLS WITH CARE. Keep tools sharp and clean for better and safer performance. Follow instructions for lubricating and changing accessories. Inspect tool cords periodically and if damaged, have repaired by authorized service facility. Inspect extension cords periodically and replace if damaged. Have all worn, broken or lost parts replaced immediately. Keep handles dry, clean and free from oil and grease.

14.DISCONNECT TOOLS when not in use, before servicing, and when changing accessories such as blades, bits, cutters, etc.

15.REMOVE ADJUSTING KEYS AND WRENCHES. Form habit of checking to see that keys and adjusting wrenches are removed from the tool before turning it on.

16.AVOID UNINTENTIONAL STARTING. Do not carry a plugged-in tool with finger on switch. Be sure switch is off when plugging in. Keep hands, body and clothing clear of blades, bits, cutters, etc. when plugging in the tool.

17.OUTDOOR USE EXTENSION CORDS. When tool is used outdoors, use only extension cords marked “Suitable for use with outdoor appliances – store indoors when not in use.”

18.STAY ALERT. Watch what you are doing. Use common sense. Do not operate tool when you are tired or while under the influence of medication, alcohol or drugs.

19.CHECK DAMAGED PARTS. Before further use of the tool, a guard or other part that is damaged should be carefully checked to determine that it will operate properly and perform its intended function. Check for alignment of moving parts, binding of moving parts, breakage of parts, mounting, and any other conditions that may affect its operation. A guard or other part that is damaged should be properly repaired or replaced by an authorized service center unless otherwise indicated elsewhere in this instruction manual. Have defective switches replaced by authorized service center. Do not use tool if switch does not turn it on and off.

20.WEAR EAR PROTECTION to safeguard against possible hearing loss.

SAVE THESE INSTRUCTIONS

ADDITIONAL SAFETY RULES FOR RANDOM ORBIT SANDERS

1.ALWAYS DISCONNECT the sander cord plug from the power circuit before changing abrasive sheets.

2.USE DUST MASK. Wear a protective mask to minimize breathing in the fine dust created while sanding.

3.DO NOT RUN TOOL WITH BACK-UP PAD REMOVED. Resulting vibration could cause loss of control.

4.DO NOT OPERATE TOOL WITH DUST SHROUD REMOVED. The dust shroud covers high-speed rotating parts.

3

Page 2 Page 4
Page 3
Image 3
Porter-Cable 335 instruction manual Additional Safety Rules for Random Orbit Sanders
Page 2 Page 4

335 specifications

The Porter-Cable 335 is a versatile and robust woodworking tool that has gained popularity among both amateur and professional woodworkers. Known for its reliability and performance, this electric hand-held sander is designed to deliver smooth finishes while being easy to operate.

One of the standout features of the Porter-Cable 335 is its powerful motor, which provides ample power for a variety of sanding applications. With a 2.5 amp motor, it effortlessly handles even the most demanding tasks, such as smoothing rough surfaces or finishing intricate details. This sander is equipped with a speed control feature, allowing users to adjust the RPM according to the material being worked on, ensuring optimal results every time.

This model integrates advanced technology to enhance user experience and efficiency. The unique dust collection system is noteworthy; it effectively captures dust and debris, keeping your workspace clean and ensuring that you can see your work unobstructed. This feature not only aids in maintaining a tidy work area but also promotes healthier working conditions by reducing airborne particles.

The ergonomic design of the Porter-Cable 335 is another characteristic that sets it apart. It features a comfortable grip that reduces operator fatigue during extended use, making it suitable for long sanding sessions. Additionally, its lightweight construction allows for easy maneuverability, enabling users to reach tight spaces and corners without hassle.

The sander also incorporates an easy-to-use sanding sheet clamp system. This feature simplifies the process of replacing sandpaper, allowing users to switch grits quickly without the need for additional tools. Consequently, this saves time and increases productivity, especially when working on projects that require multiple sanding stages.

Moreover, the Porter-Cable 335 boasts durability and resilience, thanks to its high-quality materials and construction. The tools are built to withstand the rigors of workshop environments, ensuring longevity and reliability.

In summary, the Porter-Cable 335 is an excellent choice for those seeking a reliable, versatile sander. With its powerful motor, advanced dust collection, ergonomic design, and user-friendly features, it is crafted to meet the needs of serious woodworkers and DIY enthusiasts alike. Whether finishing furniture, preparing surfaces for staining, or doing detailed sanding work, the Porter-Cable 335 is equipped to deliver exceptional results with every use.
Top Page Image Contents