6
NOTE: Allow motor to stop before attempting to reverse direction of
rotation. Failure to do so, could damage motor.
5. TO STOP the machine, release the trigger switch.
TO ATTACH SOCKETS
WARNING: Only use sockets rated for IMPACT DUTY. Other type
sockets might shatter, endangering operator and bystanders.
1. CAUTION: DISCONNECT MACHINE FROM POWER SOURCE.
2. Align hole (A) Fig. 2, in impact socket with anvil detent pin (B) Fig. 2.
3. Depress detent pin while pushing impact socket onto anvil until detent
pin snaps into hole (A).
TO REMOVE SOCKETS
1. CAUTION: DISCONNECT MACHINE FROM POWER CIRCUIT.
2. Insert a small diameter object (nail, pin punch, etc.), through hole in
impact socket and depress pin while pulling socket off of anvil.
Fig. 1
Fig. 2 Fig. 3
B
A
A
B1
fl2