Porter-Cable 725 instruction manual Specific Safety Rules and Symbols

SPECIFIC SAFETY RULES AND SYMBOLS

1.HOLD TOOL BY INSULATED GRIPPING SURFACES WHEN PERFORMING AN OPERATION WHERE THE CUTTING TOOLS MAY CONTACT HIDDEN WIRING OR ITS OWN CORD. Contact with a “live” wire will make exposed metal parts of the tool “live” and shock the operator.

2.KEEP HANDS AWAY FROM CUTTING AREA.

3.KEEP BLADES SHARP.

4.MAKE SURE the material to be cut is firmly held to prevent movement.

5.STAY CLEAR OF END PIECES that may fall after being cut off.

6.NEVER USE A LIQUID COOLANT with portable band saws.

7.Some wood contains preservatives which can be toxic. Take extra care to prevent inhalation and skin contact when working with these materials. Request, and follow, any safety information available from your material supplier.

8. WARNING: EXERCISE EXTREME CAUTION WHEN BLIND CUTTING TO BE CERTAIN THAT THERE ARE NO FOREIGN OBJECTS SUCH AS ELECTRICAL WIRE, CONDUIT, PLUMBING PIPES, ETC., THAT MAY COME INTO CONTACT WITH THE BLADE.

9. WARNING: There are certain applications for which this tool was designed. Porter-Cable strongly recommends that this tool NOT be modified and/or used for any application other than for which it was designed. If you have any questions relative to its application DO NOT use the tool until you have written Porter-Cable and we have advised you.

	Technical Service Manager
	Porter-Cable Corporation
	4825 Highway 45 North
SYMBOL	Jackson, TN 38305
	DEFINITION
V	volts
A	amperes
Hz	hertz
W	watts
kW	kilowatts
µF	microfarads
l	liters
kg	kilograms
N/cm2	newtons per square centimeter
Pa	pascals
h	hours
min	minutes
s	seconds
........................	alternating current
3	three-phase alternating current
3N	three-phase alternating current with neutral
........................	direct current
n0	no load
........................	alternating or direct current

5