OPERATIONS

BEFORE YOU START TO WORK

Select the blade best suited for the material to be cut (see ACCESSORIES). For greatest economy, use the shortest blade suitable for the thickness of the material to be cut.

Be sure the material to be cut is rigid. Small work pieces should be securely clamped in a bench vise or with clamps to the work table. As the work progresses in scroll or curved cut-out pieces, the material may be readjusted to accommodate the movement of the saw. If the work is large enough, it may be held only by hand across saw horses. The saw cuts freely with only slight feed pressure. Forcing the saw will not make it cut faster.

SAWING WOOD

The TIGER SAW® is used much the same as a hand saw in that it is moved toward the operator during the cutting operation. However, since the blade cuts on the up-stroke instead of the down-stroke as in the case of the hand saw, the good or finish side of the work should face down during the cutting operation.

PLUNGE CUTS

The TIGER SAW® can be used for plunge cutting wood, plywood, wallboard, and plastic materials. DO NOT attempt to plunge cut metal.

Clearly mark line of cut on the work. Grasp front housing with one hand and rear handle with the other hand. To start cut, rest saw on shoe bracket, align blade with the marked line of cut, (blade NOT touching work), as shown in Fig. 13. Start saw. Using bracket as a pivot point, roll saw forward by raising rear handle, as shown in Fig. 14. When blade has cut through the work, continue raising the rear handle until saw is perpendicular to the work surface. Keep saw in this position and move blade along line of cut.

SAWING METAL

When cutting angle, H-beam, I-beam, channel, etc., start the cut on the surface where the greatest number of teeth will contact the work. To make a pocket cut, drill a starting hole first. To extend blade life, cutting oil can be applied to the work surface along the line of the cut.

Fig. 13

Fig. 14

11

Page 10 Page 12
Page 11
Image 11
Porter-Cable 735 instruction manual Operations, Before YOU Start to Work, Sawing Wood, Plunge Cuts, Sawing Metal
Page 10 Page 12

735 specifications

The Porter-Cable 735 is a versatile and robust thickness planer that has become a go-to tool for both professional woodworkers and DIY enthusiasts alike. Designed to handle a variety of wood types, the 735 excels in providing a smooth and precise finish, making it an essential addition to any workshop.

One of the standout features of the Porter-Cable 735 is its powerful 15-amp motor, which delivers an impressive 20,000 RPM. This high-speed operation enables the planer to tackle even the toughest hardwood, effortlessly removing material while ensuring a consistent finish. With a maximum cutting width of 12 inches and a cutting depth capacity of up to 1/8 inch, users can easily work with larger pieces of lumber, making it suitable for various woodworking projects.

The 735 utilizes a dual-blade design that enhances performance and provides a smooth surface with reduced tear-out. The reversible blades offer extended life, allowing users to switch them when one side becomes dull, reducing downtime and increasing efficiency. Additionally, the tool features a three knife cutter head design that provides a finer finish with minimal effort, ensuring that the results meet the high standards of any woodworking project.

Another significant characteristic of the Porter-Cable 735 is its integrated infeed and outfeed tables. These tables help to support longer workpieces, reducing the risk of snipe, a common issue where the ends of the boards can be cut unevenly. The tables are adjustable, allowing for seamless transitions during operation, which leads to a professional quality finish.

Porter-Cable has also incorporated advanced technology in the 735, including a built-in depth adjustment knob that allows for micro-adjustments, facilitating precise control over the cut depth. This feature adds to the tool's overall ease of use, making it accessible for beginners while still providing the functionality that seasoned woodworkers expect.

The portable design of the 735, combined with its lightweight construction, ensures that it can be easily transported and maneuvered around different job sites. With its durable build quality, the Porter-Cable 735 is designed to withstand the rigors of daily use, ensuring longevity and reliability.

In summary, the Porter-Cable 735 thickness planer combines power, precision, and innovative features, making it an invaluable tool for anyone serious about woodworking. Its performance, coupled with user-friendly design elements, guarantees that both novices and experienced woodworkers can achieve outstanding results in their projects.
Top Page Image Contents