ROTATABLE GEAR HOUSING ADJUSTMENT
DISCONNECT TOOL FROM POWER SOURCE.
1.The variable angle reciprocating saw is designed with a rotatable gear housing for easy adjustment of cutting angle. This feature permits access to places where conventional tools cannot be used.
2.The gear housing can rotate 90° up or 90° down. The angle can be adjusted to 13 detented positions (6 up, 6 down, 1 straight).This feature is designed to simplify adjusting up or down angle of cut and provide accessibility in close quarters.
3.To rotate the gear housing, depress lock button (A) Fig. 6. Hold the button depressed while moving the gear housing up or down to the desired position or angle. Then release the lock button and continue to move the gear housing until the lock button snaps into the desired detent position (B) Fig. 7.
A
Fig. 6
B
Fig. 7
FRONT SCROLL HOUSING ADJUSTMENT
DISCONNECT TOOL FROM POWER SOURCE.
1.The variable angle reciprocating saw is designed with a rotatable front scroll housing for easier radius cuts. This feature permits additional access in close workspaces to reach places where conventional tools cannot be used.
2.The front scroll housing can rotate 360°. The front scroll housing can be adjusted radially to 12 detented positions. This feature is designed to simplify adjusting to radial angle of cut and combined with the rotatable gear housing, provides accessibility to most any cutting operation.
3.To rotate the front scroll housing, depress lock button (A) Fig. 8. Hold the button depressed while moving the front scroll housing clockwise or counterclockwise to the desired radial position or angle. Then release the lock button and continue to move the front scroll housing until the lock button snaps into the desired detent position (B) Fig. 9.
A
B
Fig. 8 | Fig. 9 |
11
