ADDITIONAL SPECIFIC SAFETY RULES continued

Lower Guard Safety Instructions

p)Check lower guard for proper closing before each use. Do not operate the saw if lower guard does not move freely and close instantly. Never clamp or tie the lower guard into the open position. If saw is accidentally dropped, lower guard may be bent. Raise the lower guard with the retracting handle and make sure it moves freely and does not touch the blade or any other part, in all angles and depths of cut.

q)Check the operation of the lower guard spring. If the guard and the spring are not operating properly, they must be serviced before use. Lower guard may operate sluggishly due to damaged parts, gummy deposits, or a build-up of debris.

r)Lower guard should be retracted manually only for special cuts such as "plunge cuts" and "compound cuts." Raise lower guard by retracting handle and as soon as blade enters the material, the lower guard must be released. For all other sawing, the lower guard should operate automatically.

s)Always observe that the lower guard is covering the blade before placing saw down on bench or floor. An unprotected, coasting blade will cause the saw to walk backwards, cutting whatever is in its path. Be aware of the time it takes for the blade to stop after switch is released.

Other Safety Instructions

t)Wear eye and hearing protection. Always use safety glasses. Everyday eyeglasses are NOT safety glasses. USE CERTIFIED SAFETY EQUIPMENT. Eye protection equipment should comply with ANSI Z87.1 standards. Hearing equipment should comply with ANSI S3.19 standards.

u) Use of this tool can generate and disburse dust or other airborne particles, including wood dust, crystalline silica dust and asbestos dust. Direct particles away from face and body. Always operate tool in well ventilated area and provide for proper dust removal. Use dust collection system wherever possible. Exposure to the dust may cause serious and permanent respiratory or other injury, including silicosis (a serious lung disease), cancer, and death. Avoid breathing the dust, and avoid prolonged contact with dust. Allowing dust to get into your mouth or eyes, or lay on your skin may promote absorption of harmful material. Always use properly fitting NIOSH/OSHA approved respiratory protection appropriate for the dust exposure, and wash exposed areas with soap and water.

SAVE THESE INSTRUCTIONS!

8

Page 7 Page 9
Page 8
Image 8
Porter-Cable 844 instruction manual Lower Guard Safety Instructions
Page 7 Page 9

844 specifications

The Porter-Cable 844 is a highly regarded portable benchtop planer, designed to combine power, precision, and convenience for both professional woodworkers and DIY enthusiasts. This planer features a robust 15-amp motor that delivers a substantial 20,000 RPM, ensuring efficient stock removal and smooth finishes on a variety of wood materials.

One of the standout features of the Porter-Cable 844 is its dual blade system, which utilizes two high-quality, reversible blades. This not only increases the tool's durability but also offers an extended lifespan before the need for replacement. The blades can effectively remove up to 1/8 inch of material in a single pass, making it suitable for a wide range of planing tasks, from flattening rough lumber to finishing edges for joint preparation.

The design of the 844 emphasizes user comfort and ease of operation. With a lightweight frame, it is portable enough for easy transport between job sites. Its ergonomic handles provide a comfortable grip, reducing fatigue during extended use. The integrated dust port is another practical feature, allowing for efficient dust collection when attached to a vacuum system. This functionality keeps the workspace tidy and enhances visibility while working.

Porter-Cable’s innovative feed system is designed for consistent and dependable operation. Featuring a variable speed option, the feed rate can be adjusted according to the specifics of the project, which allows users to tailor the planing process to different wood types and thicknesses. The adjustable table height is another beneficial characteristic, allowing for precise depth settings to accommodate various machining requirements.

Safety features are paramount in the design of the Porter-Cable 844. It includes a safety lock-off switch that prevents accidental starts, ensuring a secure operating environment. The combination of power, precision, and user-friendly features makes the Porter-Cable 844 a versatile and essential tool for anyone serious about woodworking.

In summary, the Porter-Cable 844 stands out in its class due to its powerful motor, dual blade capabilities, adjustability, and safety features. Whether you are looking to smooth out rough cuts, prepare wood for joining, or achieve a fine finish on your projects, the Porter-Cable 844 provides the performance and reliability you need to get the job done efficiently. It is a top choice for professional craftsmen and hobbyists alike, ensuring excellent results on each planing task.
Top Page Image Contents