1.With the help of another person, tilt the generator and rest on frame as shown. DO NOT remove the shipping block until portability kit has been assembled.
The generator is too heavy to be lifted by one person. Obtain
assistance from others before lifting.
2.Assemble wheels to wheel brackets using shoulder bolts (11) and locknuts (12). NOTE: Valve stem should be to the outside. Tighten securely.
11
valve stem
3.Attach rubber bumper (4) to foot bracket (3) using screw (13) and keps nut (14). Tighten securely.
4.Remove the ground lug. Save grounding lug, screw, and flange nut to assemble foot bracket.
5.Attach foot bracket assembly (3) and ground lug to generator frame as shown. Tighten screws securely. NOTE: Make sure grounding lug is oriented as shown.
grounding lug
grounding lug
shipping block
10
4 
38
6.To make installation easier, submerge handle grips into warm soapy water. Remove handle grips from soapy water and slide onto handles .
7. Squeeze snap button (9), slide into handle, and |
|
|
|
|
|
| |
| 9 |
| |
release snap button through second hole. |
|
| |
|
|
| |
NOTE: V of snap button is inserted first. Repeat |
|
|
|
step on other handle. |
|
|
|
8.Depress snap button (9), slide into handle
bracket, and release through first slot in handle bracket as shown. Secure handle to handle bracket with screw (7) and flange nut (8).
A02871 | 10- ENG |
