Porter-Cable CFFC350B, CFFR350B Maintenance, Customer Responsibilities, To Check Safety Valve

MAINTENANCE

Customer Responsibilities

	Before	Daily or
	each	after	Frequently	Yearly
		each
	use
		use
Check Safety Valve	●
Drain Tank		●
Air Filter			●1
Air compressor pump intake				●
and exhaust valves
1- more frequent in dusty or humid conditions

Unit cycles automatically when power is on. When performing maintenance, you may be exposed to voltage

sources, compressed air, or moving parts. Personal injuries can occur. Before performing any maintenance or repair, disconnect power source from the compressor and bleed off all air pressure.

To ensure efficient operation and longer life of the air compressor outfit, a routine maintenance schedule should be prepared and followed. The following routine maintenance schedule is geared to an outfit in a normal working environment operating on a daily basis. If necessary, the schedule should be modified to suit the conditions under which your compressor is used. The modifications will depend upon the hours of operation and the working environment. Compressor outfits in an extremely dirty and/or hostile environment will require a greater frequency of all maintenance checks.

NOTE: See "Operation" section for the location of controls.

To Check Safety Valve

If the safety valve does not work properly, over- pressurization may occur, causing air tank rupture or an explosion.

1.Before starting compressor, pull the ring on the safety valve to make sure that the safety valve operates freely. If the valve is stuck or does not operate smoothly, it must be replaced with the same type of valve.

A01787 16- ENG