OPERATING PROCEDURES

Preparation for Use:

1.Before attaching air hose or accessories, make sure the OFF/AUTO lever is set to “OFF” and the air regulator is closed.

2.Inspect air intake filter (H) Fig. 1. Clean or replace as necessary.

3.Attach hose and accessories.

TOO MUCH AIR PRESSURE CAUSES A HAZARDOUS RISK OF BURSTING. CHECK THE MANUFACTURER’S MAXIMUM

PRESSURE RATING FOR AIR TOOLS AND ACCESSORIES. THE REGULATOR OUTLET PRESSURE MUST NEVER EXCEED THE MAXIMUM PRESSURE RATING OF THE TOOL BEING USED.

4.Turn the OFF/AUTO lever to “AUTO” and allow tank pressure to build. Motor will stop when tank pressure reaches “cut-out” pressure.

5.Open the regulator by turning it clockwise. Adjust the regulator to the correct pressure setting. The compressor is ready for use.

6.Always operate the air compressor in well ventilated areas, free of gasoline or other solvent vapors. Do not operate the compressor near the spray area.

After Use:

7.Set the “OFF/AUTO” lever to “OFF”.

8.Turn the regulator counterclockwise to set the outlet pressure to zero.

9.Remove the air tool or accessory.

10.Pull ring on safety valve (K) Fig. 3, allowing air to bleed from the tank until tank pressure is approximately 20 psi. Release safety valve ring.

11.Drain water from air tank. Turn drain valve (J) Fig. 2, counterclockwise, to open.

WATER WILL CONDENSE IN THE AIR TANK. IF NOT DRAINED, WATER WILL CORRODE AND WEAKEN THE AIR TANK CAUSING A RISK OF AIR TANK RUPTURE.

NOTE: If drain valve is plugged, pull ring on safety valve (K) Fig. 3, and hold until all air pressure has been released. The valve can then be removed, cleaned, and reinstalled.

12.After the water has been completely drained, turn drain valve to close. The air compressor can now be stored.

MAINTENANCE

KEEP TOOL CLEAN

Periodically blow out all air passages with dry compressed air. Inspect air intake filter and clean or replace as necessary. Clean all plastic parts with a soft damp cloth. NEVER use solvents to clean plastic parts. They could possibly dissolve or otherwise damage the material.

WEAR SAFETY GLASSES WHILE USING COMPRESSED AIR.

FAILURE TO START

Should your tool fail to start, check to make sure the prongs on the cord plug are making good contact in the outlet. Also, check for blown fuses or open circuit breakers in the line.

10-ENG

Page 9 Page 11
Page 10
Image 10
Porter-Cable CPF23400S instruction manual Operating Procedures, Maintenance, Preparation for Use, After Use
Page 9 Page 11

CPF23400S specifications

The Porter-Cable CPF23400S is a versatile and efficient portable air compressor designed for both professional and home use. With its robust construction and a powerful motor, this compressor is engineered to handle a variety of tasks, making it an essential tool for contractors, DIY enthusiasts, and those tackling home improvement projects.

One of the standout features of the CPF23400S is its impressive 3-gallon tank capacity, which provides a steady supply of air for various applications. This tank size strikes a balance between portability and performance, allowing users to take it to job sites or use it in workshops without the bulk and weight of larger compressors. The compressor operates at a maximum pressure of 135 PSI, ensuring that it can power a range of pneumatic tools, including nail guns, air wrenches, and inflators.

The CPF23400S is equipped with a 1.5-HP motor that delivers reliable performance while maintaining a relatively quiet operation, with noise levels typically around 68 decibels. This feature is particularly beneficial in settings where noise reduction is a priority, such as residential areas or indoor workspaces. Additionally, the compressor features an oil-free pump, which eliminates the need for regular maintenance and contributes to its ease of use. The oil-free design also allows for quick startup and operation, providing users with the ability to get their projects underway without delay.

Another noteworthy characteristic of the Porter-Cable CPF23400S is its lightweight and compact design. Weighing in at just around 36 pounds, it is easy to transport and store. The integrated handle and rubber feet enhance stability and mobility, enabling users to move it effortlessly from one location to another. Its compact form factor ensures it can fit into tight spaces, making it ideal for both indoor and outdoor tasks.

In terms of safety features, the CPF23400S includes a thermal overload protection system that prevents the motor from overheating, prolonging the lifespan of the unit. Overall, the Porter-Cable CPF23400S stands out in the market for its combination of portability, performance, and user-friendly features, making it a reliable choice for anyone in need of a portable air compressor. Its technological advancements and practical design make it a valuable addition to any toolkit, offering an excellent balance of power and convenience.
Top Page Image Contents