OPERATION

KNOW YOUR GENERATOR

Read this General Manual and Safety Rules before operation of your Generator. Compare the illustration in your parts manual with your generator to familiarize yourself with the location of various controls and adjustments. Save all manuals for future references.

GENERATOR CAPACITY

IMPORTANT: Exceeding the rated capacity of your generator can result in serious damage to your generator and connected electrical devices. See the Wattage Calculation section in this manual to assist you in determining the appliances and tools that can be run with the wattage capacity of your generator.

CIRCUIT BREAKERS

Each receptacle has a circuit breaker to protect the generator from overloading. If the circuit breaker trips, unplug all electrical loads from the generator. Let the circuit breaker cool down. Push circuit breaker button to reset.

LOW OIL PROTECTION

Your generator engine is equipped with Low Oil Shutdown Low Oil Shutdown is a safety device designed to protect your engine from damage in the event the oil level in the crankcase is low.

If while the engine is running and the oil gets low, it will automatically shut itself down and will not restart until the oil is added. If the oil is low before start-up, the generator will not start until oil is added.

NOTE: The Low Oil Shutdown mechanism is very sensitive. You must fill the engine to the full mark on the dipstick to inactivate this safety device.

IMPORTANT: Low Oil Protection will not automatically shut down the engine if oil level becomes low while the engine is running. Always check engine oil level before starting the engine.

BEFORE START UP

This generator has been shipped from the factory without oil in the crankcase. Operating the unit without oil can damage the engine.

Always check engine oil level before every start. Running engine low of oil or out of oil could result in serious damage to the engine.

Follow the steps listed below before starting generator:

1.Check engine oil. Refer to the Engine Operator's Manual for correct grade and quantity of oil.

2. Check fuel level, fill as required. Make sure generator is turned off and has been allowed time to cool down. Use clean, fresh, regular unleaded gasoline with a minimum of 87 octane. Do not mix oil with gasoline.

Never fill fuel tank completely. Fill tank to 1/2" below the bottom of the filler neck to

provide space for fuel expansion. Wipe any fuel spillage from engine and equipment before starting engine.

Never fill fuel tank indoors. Never fill fuel tank when engine is running or hot. Do not smoke when filling fuel tank.

Never run engine indoors or in enclosed, poor ventilated areas, engine exhaust contains carbon monoxide, an odorless and deadly gas.

3.Make sure generator is grounded in accordance with local requirements.

4.All electrical loads MUST be disconnected.

11- ENG

D28362

Page 10 Page 12
Page 11
Image 11
Porter-Cable D28362-031-0 instruction manual Operation
Page 10 Page 12

D28362-031-0 specifications

The Porter-Cable D28362-031-0 is a robust and versatile angle grinder designed for both professionals and DIY enthusiasts seeking reliable performance in various grinding and cutting applications. With a powerful motor and a variety of features, this tool stands out in the competitive market of power tools.

One of the main features of the D28362-031-0 is its 13-amp motor, which provides a no-load speed of up to 8,500 RPM. This high-speed capability allows users to tackle a variety of tasks swiftly, including metal grinding, deburring, and cutting through tougher materials. The grinder's substantial power output ensures efficiency and helps to extend the lifespan of the tool, making it ideal for heavy-duty applications.

The design of the Porter-Cable D28362-031-0 emphasizes user comfort and control. It features an ergonomic side handle that can be adjusted to multiple positions, allowing for optimal grip and reducing operator fatigue during extended use. The tool is also equipped with a protective labyrinth design, which helps to keep dust and debris out of the motor, enhancing durability and operational longevity.

Safety is paramount with the D28362-031-0. It includes a quick-release guard that can be easily adjusted without the need for tools, allowing users to switch from grinding to cutting tasks smoothly. Additionally, the protected switch prevents accidental activation, ensuring that the tool is only operational when intended.

Another significant characteristic of the D28362-031-0 is its durability. The unit is constructed with high-quality materials designed to withstand harsh work environments. The heavy-duty housing adds an extra layer of resilience, making this grinder suitable for job sites where tools are subject to wear and tear.

Moreover, the D28362-031-0 is compatible with various accessories, including grinding wheels, cut-off blades, and sanding discs. This versatility enables users to customize their tasks according to their specific needs, whether in metalworking, masonry, or general construction.

Overall, the Porter-Cable D28362-031-0 angle grinder combines power, comfort, and safety, making it an excellent addition to any tool collection. Its design philosophy focused on user experience ensures that both professionals and hobbyists can achieve precise results in their projects while enjoying the durability and reliability of this high-performance tool. With the D28362-031-0, Porter-Cable continues to deliver quality that meets the demands of today’s skilled tradespeople.
Top Page Image Contents