OPERATING INSTRUCTIONS

USING THE TOOL WITH SELECTABLE TRIGGERING OPTIONS

Complete all steps of PREPARING THE TOOL before using the tool.

This tool is shipped from the factory with a selectable trigger set in the “SINGLE SEQUENTIAL ACTUATION” firing mode as described in number 1 below. The selectable trigger can be set for the “CONTACT ACTUATION” firing mode as described in number 2 below;

1.To use the tool in the SINGLE SEQUENTIAL ACTUATION MODE depress trigger lever pivot pin (A) Fig. 23, rotate arrow to position (B), and release. Note: Trigger lever pivot pin is spring loaded and held in position by locking tab (D) Fig. 23 to prevent movement during operation. To fire, grip tool firmly to maintain control, position nose of tool onto work surface, push tool firmly against work surface to depress safety, and then squeeze trigger to fire a fastener, as shown at (S) Fig. 24. Allow tool to recoil away from work surface as fastener is driven. This “single sequential actuation” method provides the most accurate fastener placement.

-OR-

2.To use the tool in the CONTACT ACTUATION MODE depress trigger lever pivot pin (A) Fig. 23, rotate arrow to position (C), and release. Note: Trigger lever pivot pin is spring loaded and held in position by locking tab (D) Fig. 23 to prevent movement during operation. To fire, grip tool firmly to maintain control, squeeze and hold trigger, push tool firmly against work surface to depress contact safety and fire a fastener, as shown at (S) Fig. 24. Allow tool to recoil away from work surface as fastener is driven. If safety element is allowed to recontact work surface before trigger is released an unwanted fastener will be fired. The tool will fire a fastener each time the contact safety is depressed. This method is known as “contact actuation” and allows very fast repetitive fastener placement.

IMPORTANT: A “single sequential actuation” trigger, which will limit the tool to method number 1 only, is available free-of-charge by calling 1-800-321-9443 in the United States and Canada or 001-731-660-9374 outside the United States and Canada, and providing tool model number, type, serial number, etc. For identification purposes: the single sequential actuation trigger is red.

Fig. 23

C D

B

A

Fig. 24

S

9

Page 8 Page 10
Page 9
Image 9
Porter-Cable FC350 instruction manual Operating Instructions, Using the Tool with Selectable Triggering Options
Page 8 Page 10

FC350 specifications

The Porter-Cable FC350 is a versatile and robust finishing nailer designed for professionals and DIY enthusiasts who demand performance and reliability in their tools. Known for its efficient power and features, the FC350 has become a staple in various applications, particularly in trim work, cabinetry, and furniture assembly.

One of the standout features of the FC350 is its lightweight design, which enhances maneuverability while reducing operator fatigue during extended use. Weighing in at just under 6 pounds, it is easy to handle and position successfully, making it ideal for overhead and awkward angles. The ergonomic handle provides a comfortable grip, further enhancing its usability in challenging conditions.

The FC350 operates using a reliable and efficient pneumatic system, requiring an air compressor to function. It boasts a firing speed of up to 10 nails per minute, allowing for quick and efficient completion of projects. The depth adjustment feature enables users to control how deep the nails are driven, providing greater precision and adaptability to various materials. This is essential when working with different types of trim or when delicate work is involved.

Another notable characteristic of the FC350 is its 360-degree exhaust system that directs air away from the operator and the work surface. This not only keeps the workspace clean but also enhances safety by reducing the risk of debris and dust impacting the nailer's performance.

The tool features a tool-free jam release mechanism, enabling users to quickly and easily clear any jams that may occur without the need for additional tools. This quick access to the nail compartment ensures minimal downtime, allowing for more efficient work.

The FC350 is compatible with 18-gauge nails ranging from 1 to 2 inches in length, making it suitable for a wide range of fastening applications. It also features a sequential firing mode for greater control, ensuring precise placement even in intricate projects.

In summary, the Porter-Cable FC350 finishing nailer stands out for its combination of lightweight design, powerful pneumatic operation, convenient features, and versatility. It's a reliable choice for anyone looking to achieve professional-grade results in finishing applications. Whether you are a seasoned contractor or a weekend warrior, the FC350 will enhance productivity and deliver superior results on every project.
Top Page Image Contents