HAZARD

WHAT CAN HAPPEN

• Breathing exhaust fumes will cause serious injury or death!

RISK TO

BREATHING

• Some cleaning fluids contain sub- stances which could cause injury to skin, eyes, or lungs.

HOW TO PREVENT IT

• Operate pressure washer in a well

ventilated area. Avoid enclosed

areas such as garages, basements,

etc.

• Never operate unit in a location

occupied by humans or animals.

• Use only cleaning fluids specifically

recommended for high pressure

washers. Follow manufacturers

recommendations. Do not use

chlorine bleach or any other

corrosive compound.

RISK OF INJURY OR PROPERTY DAMAGE WHEN TRANSPORTING OR STORING

RISK TO FLUID

INJECTION

RISK OF

CHEMICAL

BURN

•Fuel or oil can leak or spill and could result in fire or breathing hazard, serious injury or death can result. Fuel or oil leaks will dam- age carpet, paint or other surfaces in vehicles or trailers.

•Your washer operates at fluid pressures and velocities high enough to penetrate human and animal flesh, which could result in amputation or other serious injury. Leaks caused by loose fittings or worn or damaged hoses can result in injection injuries. DO NOT TREAT FLUID INJECTION AS A SIMPLE CUT! See a physician immediately!

•Injuries can result if system pressure is not reduced before attempting maintenance or disassembly.

•Use of acids, toxic or corrosive chemicals, poisons, insecticides, or any kind of flammable solvent with this product could result in serious injury or death.

• If pressure washer is equipped with

a fuel shut-off valve, turn the valve

to the off position before

transporting to avoid fuel leaks. If

pressure washer is not equipped

with a fuel shut-off valve, drain the

fuel from tank before transporting.

Only transport fuel in an OSHA

approved container. Always place

pressure washer on a protective

mat when transporting to protect

against damage to vehicle from

leaks. Remove pressure washer

from vehicle immediately upon arrival

at your destination.

• Never place hands in front of nozzle.

• Direct spray away from self and

others.

• Make sure hose and fittings are

tightened and in good condition.

Never hold onto the hose or fittings

during operation.

• Do not allow hose to contact muf-

fler.

• Never attach or remove wand or

hose fittings while system is pres-

surized.

• To relieve system pressure, shut off

engine, turn off water supply, and

pull gun trigger until water stops

flowing.

• Use only hose and high pressure

accessories rated for pressure

higher than your pressure washer's

p.s.i.

• Do not use acids, gasoline, kero-

sene, or any other flammable

materials in this product. Use only

household detergents, cleaners and

degreasers recommended for use

in pressure washers.

• Wear protective clothing to protect

eyes and skin from contact with

sprayed materials.

D26183

4- ENG

Page 3 Page 5
Page 4
Image 4
Porter-Cable PCH3031A, D26183-025-1 instruction manual Hazard What can Happen
Page 3 Page 5

PCH3031A, D26183-025-1 specifications

The Porter-Cable D26183-025-1 and PCH3031A are powerful tools designed to meet the demands of professionals and DIY enthusiasts alike. Both products embody Porter-Cable's commitment to innovation, efficiency, and precision, making them invaluable additions to any workshop or job site.

The Porter-Cable D26183-025-1 is a 5-inch random orbit sander known for its exceptional performance and user-friendly design. One of its main features is the high-performance 3.0 amp motor, which provides consistent power for a variety of sanding applications. This sander operates at a variable speed of up to 12,000 orbits per minute, allowing users to adjust the speed according to their specific sanding needs. The tool’s design minimizes vibration, enhancing user comfort during extended periods of use.

Additionally, the D26183-025-1 features a dual-plane counterbalance for reduced vibration, which contributes to better control and smoother operation. The convenient dust collection system is another highlight, as it efficiently collects dust, keeping the workspace cleaner and reducing cleanup time. A dust-sealed switch further protects the tool's components from debris, ensuring a longer lifespan.

On the other hand, the PCH3031A is a robust motor and generator combination designed for versatility and durability. This unit is equipped with an efficient engine that provides reliable power, making it suitable for construction sites and outdoor projects where portable power is essential. An integrated inverter ensures clean, stable power, which is crucial for sensitive electronics and appliances.

Key characteristics of the PCH3031A include multiple outlet options, allowing users to connect different devices simultaneously with ease. Its compact, lightweight design enables easy transportation, while the rugged construction withstands the rigors of daily use. The tool's low noise output is a significant advantage, making it a great choice for indoor applications without disturbing the surrounding environment.

Together, the Porter-Cable D26183-025-1 and PCH3031A represent the brand's dedication to combining power with practicality. They are meticulously designed to enhance productivity, making them essential tools for professionals aiming to achieve high-quality results in various sanding and power supply tasks. Each product reflects an emphasis on user comfort, reliability, and performance, reinforcing Porter-Cable's reputation as a leader in the tools market.
Top Page Image Contents