REPLACE SPARK PLUG

Replace the spark plug each year to ensure the engine starts easier and runs better. Set spark plug gap at 0.025 inch. Ignition timing is fixed and nonadjustable.

1.Twist, then pull off spark plug boot.

2.Remove spark plug from cylinder and discard.

3.Replace with Champion RCJ-6Y spark plug and tighten securely with a 3/4 inch socket wrench.

4.Reinstall the spark plug boot.

REPLACING THE LINE

1.Remove spool by firmly pulling on tap button.

2.Clean entire surface of hub and spool.

3.Replace with a pre-wound spool, or cut two lengths of 12-1/2feet of 0.080! (2 mm) di- ameter Poulan PROr brand line.

WARNING: Never use wire, rope, string, etc., which can break off and become a dangerous missile.

4.Insert ends of the lines about 1/2 inch (1 cm) into the small holes on the inside of spool.

Spool

Small

Holes

Line exit holes

 

Line in Notch

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Line in Notch

Hub

5.Wind the line evenly and tightly onto the spool. Wind in the direction of the arrows found on the spool.

6.Push the lines into the notches, leaving 3 to 5 inches (7 -- 12 cm) unwound.

7.Insert the lines into the the exit holes in the hub as shown in the illustration.

8.Align the notches with the line exit holes.

9.Push spool into hub until it snaps into place.

10.Pull the lines extending outside of the hub to release the lines from the notches.

REPLACING THE CUTTING HEAD

1.Align hole in the dust cup with the hole in the side of the gearbox by rotating the dust cup.

2.Insert a small screwdriver into aligned holes. This will keep the shaft from turn- ing while removing and installing trimmer head.

Screwdriver

3.While holding the screwdriver in position, remove trimmer head by turning clock- wise.

4.Thread replacement trimmer head onto the shaft by turning counterclockwise. Tighten until secure.

5.Remove the screwdriver.

CARBURETOR ADJUSTMENT

WARNING: Keep others away when making idle speed adjustments. The trimmer head will be spinning during this procedure. Wear your protective equipment and observe all safety precautions.

The carburetor has been carefully set at the factory. Adjustments may be necessary if you notice any of the following conditions:

S Engine will not idle when the throttle is released.

Make adjustments with the unit supported so the cutting attachment is off the ground and will not make contact with any object. Hold the unit by hand while running and making ad- justments. Keep all parts of your body away from the cutting attachment and muffler.

Idle Speed Adjustment

Allow engine to idle. Adjust speed until engine runs without stalling (idle speed too slow).

S Turn idle speed screw clockwise to increase engine speed if engine stalls or dies.

STurn idle speed screw counterclockwise to decrease engine speed.

Air Filter

Cover

Idle Speed Screw

If you require further assistance or are unsure about performing this procedure, contact an authorized service dealer or call 1--800--554--6723.

8

Page 7 Page 9
Page 8
Image 8
Poulan 131 instruction manual Replace Spark Plug, Replacing the Line, Replacing the Cutting Head, Carburetor Adjustment
Page 7 Page 9

131 specifications

The Poulan 131 is a robust and versatile chainsaw designed for both home users and professionals alike. It combines power, performance, and user-friendly features, making it an ideal tool for a variety of cutting tasks. One of the standout characteristics of the Poulan 131 is its powerful engine. Equipped with a 33cc two-stroke engine, this chainsaw is capable of delivering impressive performance, enabling it to handle demanding tasks, such as felling trees, trimming limbs, and cutting firewood.

A hallmark of the Poulan 131 is its efficient fuel system. Utilizing a unique fuel and oil mixture, the chainsaw promotes reduced emissions while maximizing power output. This feature not only makes it environmentally friendly but also ensures longevity and performance consistency, leading to less frequent maintenance.

For ease of use, the Poulan 131 incorporates an automatic oiler system that lubricates the bar and chain during operation, reducing friction and wear. This feature is crucial for maintaining the efficiency of the saw while also enhancing the life of the bar and chain. The chainsaw is also equipped with an adjustable chain tension system, allowing users to quickly adjust the chain as it stretches over time.

Safety is another significant aspect of the Poulan 131. It comes with a chain brake that allows for immediate stopping of the chain in case of kickback, providing users with confidence as they operate the machine. Additionally, the chainsaw features a comfortable grip handle designed to minimize vibrations, allowing for prolonged use without discomfort.

Weighing in at a manageable weight, the Poulan 131 is easy to maneuver, making it suitable for both novices and experienced users alike. Its compact design aids in cutting accuracy and control, which is essential when performing delicate tasks or working in tight spaces.

Moreover, the Poulan 131 is designed for easy starting, featuring a reliable starting system that reduces the effort required to fire up the engine. This feature is particularly beneficial, especially in colder weather conditions, where starting issues can often be a nuisance.

In conclusion, the Poulan 131 is a well-rounded chainsaw that embodies the perfect blend of power, safety, and user-friendly features. It is an excellent choice for anyone looking for a reliable tool capable of handling various cutting tasks with ease and efficiency. Whether you are a casual user or a professional, the Poulan 131 stands out as a dependable option in the chainsaw market.
Top Page Image Contents