Maintenance

LIMBING

SLimb a tree only after it is cut down. S Leave the larger limbs underneath the

felled tree to support the tree as you work.

S Start at the base of the felled tree and work toward the top, cutting branches and limbs. Remove small limbs with one cut.

S Keep the tree between you and the chain.

S Remove larger branches with the cut- ting techniques described in BUCKING WITHOUT A SUPPORT.

S Always use an overcut to cut small and freely hanging limbs. Undercut- ting could cause limbs to fall and pinch the saw.

PRUNING

WARNING: Limit pruning to limbs shoulder height or below. Do not cut if branches are higher than your shoulder. Get a professional to do the job.

S Make your first cut 1/3 of the way through the bottom of the limb. This cut will make the limb sag so that it falls easily on the second cut.

S Next make a second cut all the way

through the limb.

SFinish the pruning operation by using an overcut so that the stump of the limb protrudes 1 to 2 inches from the trunk of the tree.

Second cut

First cut

1/3 of way

3rd cut 1 to 2 in. from trunk of tree

CUSTOMER RESPONSIBILITIES

WARNING: Disconnect power source before performing maintenance.

Fill in dates as you complete	Before	After	Every	Service
regular service	Use	Use	15 min.	Dates
Check for damaged/worn parts	n
Check for loose fasteners/parts	n
Check chain tension	n

Check chain sharpness	n
Check guide bar	n
Check bar and chain oil level	n		n
Inspect and clean unit & labels		n
Clean guide bar groove		n

GENERAL RECOMMENDATIONS

The warranty on this unit does not cover items that have been subjected to oper- ator abuse or negligence. To receive full value from the warranty, the operator must maintain unit as instruct- ed in this manual. Various adjustments will need to be made periodically to properly maintain your unit. Improper mainte- nance may cause damage to the unit and possible injury to the operator or by- standers.

CHECK FOR DAMAGED OR WORN PARTS

Contact an authorized service dealer for replacement of damaged or worn parts. NOTE: It is normal for a small amount of oil to appear under the saw after motor stops. Do not confuse this with a leaking oil tank.

S Trigger Switch -- Ensure the trigger switch functions properly by squeez- ing and holding the trigger switch. Make sure motor starts and stops.

1420, 1630 specifications

The Poulan 1420 and 1630 are noteworthy chainsaw models designed to cater to the needs of both homeowners and occasional users, providing efficient and reliable cutting performance. These chainsaws are part of Poulan's renowned lineup, reflecting the brand's commitment to quality and innovation.

The Poulan 1420 is equipped with a powerful 14-inch bar and a lightweight design, making it perfect for light trimming, pruning, and small to medium-sized tasks around the yard. One of its main features is the easy-access air filter, which enhances maintenance convenience and prolongs the life of the engine. The 1420 runs on a 33 cc two-stroke engine, delivering impressive power for its size. Its automatic oiling system ensures that the chain operates smoothly, reducing wear and tear and improving cutting performance.

In addition, the Poulan 1420 boasts an ergonomic handle design for enhanced comfort during extended use. This model is also equipped with a chain brake system that adds an extra layer of safety, allowing the operator to stop the chain quickly in case of an emergency. The lightweight nature of the chainsaw makes it easy to maneuver, making it a favorite among those new to using power tools.

On the other hand, the Poulan 1630 extends capabilities with its 16-inch bar, ideal for larger cutting tasks. This model features a more powerful 40 cc engine, providing robust cutting capabilities that can handle firewood cutting, thicker branches, and larger trees. Like the 1420, the 1630 also supports an automatic oiling system and an easy-access air filter for hassle-free maintenance.

The Poulan 1630 offers additional features like a heavy-duty chain for increased durability, ensuring it can withstand rigorous use. Its ergonomic design continues to be a strong focus, allowing users to work more comfortably and efficiently. Moreover, both models incorporate Poulan’s signature Easy Start technology, which helps reduce the effort needed to start the engine, making operation seamless.

In conclusion, both the Poulan 1420 and 1630 chainsaws are excellent choices for those who seek a blend of performance, reliability, and safety in their outdoor equipment. Whether for light yard work or heavier cutting tasks, these chainsaws are equipped with features that will meet the needs of varied users, promoting ease of use and long-lasting durability. With Poulan's reputation for producing quality products, these models stand out in the competitive chainsaw market.

Poulan 1420, 1630 instruction manual Maintenance

Models: 1420, 1630