Before Starting Engine, To Start Engine

BEFORE STARTING ENGINE

Read the engine manual packed with your mower.

FILL ENGINE WITH OIL

Your lawn mower is shipped without oil in the engine.

•Be sure mower is level and area around oil ﬁll is clean.

•Remove engine oil ﬁller plug (oil ﬁll cap/ dipstick on models so equipped).

•Slowly add oil. For type and grade of oil to use, see “ENGINE” in the Mainte- nance section of this manual.

•Fill to the top of slot in ﬁller hole (to “FULL” line on dipstick on models so equipped). Do not overﬁll.

•Replace plug (oil ﬁll cap/dipstick on models so equipped) and tighten.

•Check oil level before each use. Add oil as needed.

•To change oil, see Maintenance section of this manual.

FILL GASOLINE TANK

•Fill gasoline tank with fresh, clean, un- leaded gasoline. DO NOT USE PRE-

MIUM GASOLINE. BE CAREFUL NOT TO OVERFILL TANK.

WARNING: Experience indicates that alcohol blended fuels (called gasohol or using ethanol or methanol) can attract moisture which leads to separation and formation of acids during storage. Acidic gas can damage the fuel system of an engine while in storage. To avoid engine problems, the fuel system should be emptied before storage of 30 days or longer. Drain the fuel tank, start the engine and let it run until fuel lines and carburetor are empty. Use fresh fuel next season. See Storage Instructions for additional information. Never use engine or carburetor cleaner products in fuel tank or permanent damage may occur.

TO START ENGINE

CAUTION: The mower blade rotates whenever the engine is running.

•Move engine speed control to FAST position (or to CHOKE/START position on models equipped with choke feature).

•If your mower has a primer, to start a cold engine, push primer as many times as instructed in the engine manual packed with your mower. Use a ﬁrm push. This step is not usually necessary when starting an engine which has already run for a few minutes.

•Hold operator presence control bar down against handle.

MODELS WITH RECOIL STARTER

•Pull starter handle quickly. Do not allow starter rope to snap back.

MODELS WITH ELECTRIC STARTER

•Push the engine start button (or turn the key on models so equipped).

IMPORTANT: Do not crank engine more than ﬁve continous seconds between each time you try to start. Wait 5 to 10 seconds between each attempt.

ALL MODELS

•For engines equipped with choke, slowly move engine speed control lever to FAST after engine starts.

TO STOP ENGINE

•To STOP engine, release operator pres- ence control bar.

NOTE: For engines with a primer, it may be necessary to repeat priming steps

in cooler weather. In warmer weather, overpriming may cause ﬂooding and engine will not start. If you do ﬂood engine, wait a few minutes before attempting to start and DO NOT repeat priming steps.

Operator	Recoil
presence	starter
control bar	handle
	(center
	mount
	type)

Recoil

starter handle (side mount type)

172782 specifications

The Poulan 172782 is a versatile and robust chainsaw designed for both homeowners and professionals seeking a reliable tool for cutting, trimming, and pruning tasks. With its powerful performance and user-friendly features, the Poulan 172782 has become a preferred choice among those who need a dependable chainsaw for various outdoor projects.

One of the standout features of the Poulan 172782 is its potent engine. Equipped with a 42cc two-cycle engine, it provides ample power for cutting through different types of wood, making it suitable for everything from light yard work to more demanding logging tasks. The engine's design enhances fuel efficiency while minimizing emissions, allowing users to work longer without frequent refueling.

The chainsaw incorporates a 16-inch bar and chain, offering an ideal balance between maneuverability and cutting capacity. This length is versatile enough for making quick cuts or tackling larger branches and logs. The chain itself is designed for precision cutting, ensuring clean finishes on both softwoods and hardwoods.

User comfort and safety are prioritized in the Poulan 172782's design. It features an anti-vibration system that significantly reduces hand fatigue during extended use, making it easier for users to handle the chainsaw for longer periods. Furthermore, the lightweight design aids in maneuverability, allowing for better control and precision during operation.

Safety is paramount when using power equipment, and the Poulan 172782 comes equipped with essential safety features, including a chain brake that stops the chain instantly in case of kickback. The front and rear hand guards help protect the user from debris, while the throttle lock prevents accidental starts, ensuring a safer working environment.

Maintenance is straightforward with the Poulan 172782, thanks to its easy-access air filter and tool-less chain tensioning system. This design allows users to quickly adjust the chain tension without the need for additional tools, reducing downtime and enhancing efficiency.

In conclusion, the Poulan 172782 chainsaw offers a compelling combination of power, versatility, and safety features, making it an excellent choice for users at all skill levels. Whether maintaining a garden, clearing fallen branches, or preparing firewood, the Poulan 172782 stands ready to tackle a variety of tasks with ease and reliability.

Poulan 172782 manual Before Starting Engine, To Start Engine, To Stop Engine, Fill Engine with OIL

Models: 172782