ASSEMBLY 3

TO DRIVE TRACTOR OFF SKID (See Opera- tion section, page 10, for location and func- tion of controls)

WARNING: Before starting, read, understand and follow all instructions in the Operation section of this manual. Be sure tractor is in a well-ventilated area. Be sure the area in front of tractor is clear of other people and objects.

•Be sure all the above assembly steps have been completed.

•Check engine oil level and fill fuel tank with gasoline.

•Sit on seat in operating position, depress clutch/brake pedal and set the parking brake.

•Place gear shift lever in neutral (N) position.

•Press lift lever plunger and raise attachment lift lever to its highest position.

•Start the engine. After engine has started, move throttle control to idle position.

•Depress clutch/brake pedal into full "BRAKE" position and hold. Move gearshift lever to 1st gear.

•Slowly release clutch/brake pedal and slowly drive tractor off skid.

•Apply brake to stop tractor, set parking brake and place gearshift lever in neutral position.

•Turn ignition key to "OFF" position.

Continue with the instructions that follow.

CHECK TIRE PRESSURE

The tires on your tractor were overinflated at the factory for shipping purposes. Correct tire pressure is important for best cutting performance.

•Reduce tire pressure to PSI shown in “PRODUCT SPECIFICATIONS” section of this manual.

CHECK DECK LEVELNESS

For best cutting results, mower housing should be properly leveled. See “TO LEVEL MOWER HOUSING” in the Service and Adjustments section of this manual.

CHECK FOR PROPER POSITION OF ALL BELTS

See the figures that are shown for replacing motion and mower blade drive belts in the Service and Adjustments section of this manual. Verify that the belts are routed correctly.

CHECK BRAKE SYSTEM

After you learn how to operate your tractor, check to see that the brake is properly adjusted. See “TO ADJUST BRAKE” in the Service and Adjustments section of this manual.

CHECKLIST

BEFORE YOU OPERATE AND ENJOY YOUR NEW TRAC- TOR, WE WISH TO ASSURE THAT YOU RECEIVE THE BEST PERFORMANCE AND SATISFACTION FROM THIS QUALITY PRODUCT.

PLEASE REVIEW THE FOLLOWING CHECKLIST:

✓All assembly instructions have been completed.

✓No remaining loose parts in carton.

✓Battery is properly prepared and charged. (Minimum 1 hour at 6 amps).

✓Seat is adjusted comfortably and tightened securely.

✓All tires are properly inflated. (For shipping purposes, the tires were overinflated at the factory).

✓Be sure mower deck is properly leveled side-to-side/ front-to-rear for best cutting results. (Tires must be properly inflated for leveling).

✓Check mower and drive belts. Be sure they are routed properly around pulleys and inside all belt keepers.

✓Check wiring. See that all connections are still secure and wires are properly clamped.

WHILE LEARNING HOW TO USE YOUR TRACTOR, PAY EXTRA ATTENTION TO THE FOLLOWING IMPORTANT ITEMS:

✓Engine oil is at proper level.

✓Fuel tank is filled with fresh, clean, regular unleaded gasoline.

✓Become familiar with all controls - their location and function. Operate them before you start the engine.

✓Be sure brake system is in safe operating condition.

8

Page 7 Page 9
Page 8
Image 8
Poulan 176038 Check Tire Pressure, Check Deck Levelness, Check for Proper Position of ALL Belts, Check Brake System
Page 7 Page 9

176038 specifications

The Poulan 176038 is a high-performance gas-powered chainsaw designed for both home and professional use. Known for its powerful engine and reliable performance, this model has become popular among landscapers, farmers, and DIY enthusiasts alike. One of the standout features of the Poulan 176038 is its robust 38cc engine, which provides adequate power for a variety of cutting tasks, from trimming branches to felling trees. The chainsaw is equipped with a 16-inch bar and chain, allowing for efficient cutting while maintaining a lightweight design.

One significant technology integrated into the Poulan 176038 is the easy-start mechanism, which simplifies the starting process, reducing the effort needed to get the saw running. This feature is especially useful for beginners or those who may find traditional pull-start mechanisms challenging. Additionally, the Chainsaw has an adjustable fuel and oil mixture, allowing users to customize performance based on their specific needs and the type of job at hand.

Safety is a priority with the Poulan 176038, and it includes several features to protect the user. The chainsaw is equipped with a chain brake that quickly stops the chain rotation in case of kickback, reducing the risk of injury. Moreover, it features a tensioning system for quick adjustments to the chain without the need for additional tools, enhancing both usability and safety.

Another remarkable characteristic of this chainsaw is its lightweight design, weighing around 10 pounds, which makes it easy to handle for extended periods without causing fatigue. This portability is advantageous for users who need to perform extensive cutting tasks in various locations.

The Poulan 176038 also boasts an anti-vibration system, making operation smoother and more comfortable. This system helps to minimize operator fatigue, allowing users to work longer without discomfort. Overall, the Poulan 176038 stands out as an efficient, user-friendly chainsaw that balances power, safety, and convenience, making it an excellent choice for both casual users and professionals seeking to tackle various cutting tasks with ease. Whether you are maintaining your garden or handling more significant woodcutting jobs, the Poulan 176038 delivers in performance and reliability.
Top Page Image Contents