SERVICE AND ADJUSTMENTS

TO LEVEL MOWER HOUSING

Adjust the mower while tractor is parked on level ground or driveway. Make sure tires are properly inflated (See “PROD- UCT SPECIFICATIONS” section of this manual). If tires are over or underinflated, you will not properly adjust your mower.

SIDE-TO-SIDE ADJUSTMENT (See Figs. 18 and 19)

Raise mower to its highest position.

At the midpoint of both sides of mower, measure height from bottom edge of mower to ground. Distance “A” on both sides of mower should be the same or within 1/4" of each other.

If adjustment is necessary, make adjustment on one side of mower only.

To raise one side of mower, tighten lift link adjustment nut on that side.

To lower one side of mower, loosen lift link adjustment nut on that side.

NOTE: Each full turn of adjustment nut will change mower height about 1/8".

Recheck measurements after adjusting.

BOTTOM EDGE

 

BOTTOM EDGE

OF MOWER TO

 

OF MOWER TO

GROUND

 

GROUND

A

GROUND LINE

A

FIG. 18

SUSPENSION

ARM

LIFT LINK

ADJUSTMENT NUT

FIG. 19

FRONT-TO-BACK ADJUSTMENT (See Figs. 20 and 21)

IMPORTANT: DECK MUST BE LEVEL SIDE-TO-SIDE. IF THE FOLLOWING FRONT-TO-BACK ADJUSTMENT IS NECESSARY, BE SURE TO ADJUST BOTH FRONT LINKS EQUALLY SO MOWER WILL STAY LEVEL SIDE-TO- SIDE.

To obtain the best cutting results, the mower housing should be adjusted so that the front is approximately 1/8" to 1/2" lower than the rear when the mower is in its highest position.

Check adjustment on right side of tractor. Measure distance “D” directly in front and behind the mandrel at bottom edge of mower housing as shown.

Before making any necessary adjustments, check that both front links are equal in length. Both links should be approximately 10-3/8".

If links are not equal in length, adjust one link to same length as other link.

To lower front of mower loosen nut “E” on both front links an equal number of turns.

When distance “D” is 1/8" to 1/2" lower at front than rear, tighten nuts “F” against trunnion on both front links.

To raise front of mower, loosen nut “F” from trunnion on both front links. Tighten nut “E” on both front links an equal number of turns.

When distance “D” is 1/8" to 1/2" lower at front than rear, tighten nut “F” against trunnion on both front links.

Recheck side-to-side adjustment.

MANDREL

“D”

“D”

FIG. 20

BOTH FRONT LINKS MUST BE EQUAL IN LENGTH

NUT “F”

NUT “E”

TRUNNION

FRONT LINKS

FIG. 21

19

Page 19
Image 19
Poulan 177545 owner manual To Level Mower Housing, FRONT-TO-BACK Adjustment See Figs

177545 specifications

The Poulan 177545 is a powerful and versatile chainsaw designed for both professional and residential use, catering to a wide range of cutting needs. This model stands out due to its robust construction and innovative features, making it an ideal choice for anyone seeking efficient and reliable performance.

One of the key features of the Poulan 177545 is its powerful engine. Equipped with a high-performance 46cc two-cycle engine, this chainsaw provides ample power for tackling tough cutting jobs, whether they involve felling trees, pruning branches, or cutting firewood. The engine is designed for easy starting, thanks to the built-in primer bulb and advanced start system, minimizing downtime and allowing users to get to work quickly.

The 18-inch bar length of the Poulan 177545 is another significant characteristic, providing users with a perfect balance between reach and control. This makes it suitable for both larger and smaller cutting tasks, offering versatility for different applications. The chainsaw also features a low-kickback chain design, which enhances safety and minimizes the risk of injury during operation.

Another notable technology incorporated into the Poulan 177545 is its automatic oiling system. This feature ensures that the chain remains properly lubricated during use, reducing friction and wear, which prolongs the lifespan of the chain and bar. Additionally, the chainsaw's tool-free chain tensioning system makes adjustments quick and easy, allowing users to maintain peak performance with minimal effort.

The design of the Poulan 177545 puts user comfort and safety at the forefront. It features a comfortable grip handle that reduces vibrations, making extended use more manageable. The safety chain brake adds another layer of protection, allowing for quick and responsive action in case of kickback.

Lastly, the Poulan 177545 is engineered with an emphasis on durability and ease of maintenance. The durable construction ensures that the chainsaw can withstand regular use in various environments. With its user-friendly design and maintenance features, the Poulan 177545 is a reliable tool for both seasoned professionals and DIY enthusiasts alike. In summary, the Poulan 177545 offers a combination of power, safety, and ease of use, making it an exceptional choice for anyone in need of a dependable chainsaw.