Assemble Gauge Wheels to Mower Deck See Fig | Poulan 179419 specs

ASSEMBLY

ASSEMBLE GAUGE WHEELS TO MOWER DECK (See Fig. 4)

The gauge wheels are designed to keep the mower deck in proper position when operating mower. Be sure they are properly adjusted to ensure optimum mower performance.

•Slide gauge wheel bar down into bracket channel, Be sure that gauge wheel bar aligning holes are on top. Assemble gauge wheels as shown using shoulder bolts, 3/8 washers and 3/8-16 center locknuts and tighten securely.

•For ease of mower to tractor assembly, raise gauge wheels to highest position and retain with clevis pins and spring retainers.

•Adjust gauge wheels before operating mower. See “TO ADJUST GAUGE WHEELS” in the Operation section of this manual.

RETAINER SPRING

PIN

ADJUSTING

SHOULDER BAR

BOLT

GAUGE

WHEEL 3/8-16 CENTER LOCKNUT

3/8 WASHER

FIG. 4

TO ATTACH NOSE ROLLER (See Fig. 5)

•Position brackets, 17/32 x 7/8 x 16 gauge washers, and nose roller between deck mounting brackets as shown. Be sure to position brackets on correct side, as shown.

•Install hex bolts and lock nuts as shown. Tighten hardware securely.

NOTE: Be sure bracket tabs are positioned in tab holes in deck brackets.

		“B”
		BRACKET
		TAB
	TAB
	HOLE
	HEX	LOCK
	BOLT	LOCK
	BOLT	NUT
		NUT
	“A”	NOSE
	BRACKET	ROLLER
	TAB	WASHER
		WASHER

FIG. 5

8

Image 8

Poulan 179419 owner manual Assemble Gauge Wheels to Mower Deck See Fig, To Attach Nose Roller See Fig

Contents

DPR22H48STB Safety Rules Safe Operation Practices for Ride-On Mowers Safety Rules Table of Contents Unassembled Parts Assembly Tools Required for AssemblyHOW to SET UP Your Tractor To Remove Tractor from Carton Install Seat See Fig Assemble Gauge Wheels to Mower Deck See Fig To Attach Nose Roller See Fig Install Mower and Drive Belt See Figs Check Tire Pressure Check Mower LevelnessCheck for Proper Position of ALL Belts Check Brake System Operation Know Your Tractor HOW to USE Your Tractor To Adjust Gauge Wheels See Fig To Operate Mower See FigTo Operate on Hills To Transport See Figs Before Starting the Engine Check Engine OIL LevelADD Gasoline To Start Engine See Fig Purge Transmission Mowing Tips Lubrication Chart Customer ResponsibilitiesGeneral Recommendations Before Each USE Tractor Engine Cleaning MufflerSpark Plugs Engine OIL Filter Service and Adjustments To Install MowerTo Level Mower Housing To Remove Mower See Fig FRONT-TO-BACK Adjustment See Figs To Replace Mower Drive Belt To Replace Motion Drive Belt See Fig To Adjust Brake See FigTo Replace Mower Blade Drive Belt See Fig Transmission REMOVAL/REPLACEMENT To Adjust Steering Wheel AlignmentTo Start Engine with a Weak Battery See Fig Front Wheel TOE-IN/CAMBER Replacing Battery See Fig To Remove Hood and Grill Assembly See FigTo Replace Headlight Bulb Interlocks and Relays To Adjust Carburetor To Adjust Throttle Control Cable See FigTo Adjust Choke Control See Fig Storage OtherFuel System Engine OIL Troubleshooting Points Problem Cause Correction OFF Service Notes Schematic Tractor Model Number DPR22H48STB Electrical KEY Part Description Chassis and Enclosures Bracket Fender Drive Transaxle Order parts from Steering Assembly 175118 Bolt Shoulder 7/16-20 Unc 175553 Clip Engine Optional Equipment Seat Assembly Decals Wheels & Tires Mower Lift Mower Deck Washer, Spacer Mower Vented Limited Warranty Suggested Guide for Sighting Slopes for Safe Operation Parts and Service