SERVICE AND ADJUSTMENTS

TO ADJUST BRAKE (See Fig. 23)

Your tractor is equipped with an adjustable brake system which is mounted on the side of the transaxle.

If tractor requires more than six (6) feet stopping distance at high speed in highest gear on a level dry concrete or paved surface, then brake must be adjusted.

Depress clutch/brake pedal and engage parking brake.

Measure distance between brake operating arm and nut “A” on brake rod.

If distance is other than 1-9/16", loosen jam nut and turn nut “A” until distance becomes 1-9/16". Retighten jam nut against nut “A”.

Road test tractor for proper stopping distance as stated above. Readjust if necessary. If stopping distance is still greater than six (6) feet in highest gear, further maintenance is necessary. Contact your nearest au- thorized service center/department.

WITH PARKING BRAKE “ENGAGED”

 

NUT

 

1-9/16"

“A”

JAM NUT

 

OPERATING

ARM

DO NOT TOUCH THIS NUT. IF FURTHER BRAKE ADJUST- MENT IS NECESSARY CONTACT YOUR NEAREST AUTHORIZED SERVICE CENTER/DEPARTMENT

FIG. 23

TO REPLACE MOTION DRIVE BELT (See Fig. 24)

Park the tractor on level surface. Engage parking brake. For assistance, there is a belt installation guide decal on bottom side of left footrest.

BELT REMOVAL -

Remove mower (See “TO REMOVE MOWER” in this section of manual).

NOTE: Observe entire motion drive belt and position of all belt guides and keepers.

Remove belt from stationary idler and clutching idler.

Remove belt downward from around engine pulley.

Pull belt slack toward rear of tractor. Carefully remove belt upwards from transmission input pulley and over cooling fan blades.

Remove belt from center span keeper and pull belt away from tractor.

BELT INSTALLATION -

Carefully work new belt down around transmission cooling fan and onto the input pulley.

Slide belt into the center span keeper.

Pull belt toward front of tractor and roll around the top groove of engine pulley.

Install belt through stationary idler and clutching idler.

Make sure belt is in all pulley grooves and inside all belt guides and keepers.

Install mower (See “TO INSTALL MOWER” in this section of manual).

ENGINE

PULLEY

CLUTCHING

IDLER

STATIONARY

IDLER

TRANSMISSION

INPUT PULLEY

FIG. 24

TRANSMISSION REMOVAL/REPLACEMENT

Should your transmission require removal for service or replacement, it should be purged after reinstallation and before operating the tractor. See “PURGE TRANSMIS- SION” in the Operation section of this manual.

TRANSAXLE MOTION CONTROL LEVER NEUTRAL ADJUSTMENT(See Fig. 25)

The motion control lever has been preset at the factory and adjustment should not be necessary.

Loosen adjustment bolt in front of the right rear wheel, and lightly tighten.

Start engine and move motion control lever until tractor does not move forward or backward.

Hold motion control lever in that position and turn engine off.

While holding motion control lever in place, loosen the adjustment bolt.

Move motion control lever to the neutral (N) (lock gate) position.

Tighten adjustment bolt securely.

NOTE: If additional clearance is needed to get to adjustment bolt, move mower deck height to the lowest position.

After above adjustment is made, if the tractor still creeps forward or backward while motion control lever is in neutral position, follow these steps:

Loosen the adjustment bolt.

Move the motion control lever 1/4 to 1/2 inch in the direction it is trying to creep.

Tighten adjustment bolt securely.

Start engine and test.

If tractor still creeps, repeat above steps until satisfied.

21

Page 21
Image 21
Poulan 182705 owner manual To Adjust Brake See Fig, To Replace Motion Drive Belt See Fig, Transmission REMOVAL/REPLACEMENT

182705 specifications

The Poulan 182705 is a versatile and reliable chainsaw designed for both homeowners and professionals who require a robust tool for cutting firewood, trimming branches, and tackling general landscaping tasks. Its design combines power and user-friendly features, making it an excellent choice for those who need a dependable saw that can handle various tasks around the yard or property.

One of the standout features of the Poulan 182705 is its powerful engine. Equipped with a 42cc, 2-cycle gas engine, this chainsaw delivers a solid performance, ensuring that it can cut through hardwood and thick branches with ease. The engine is designed for optimal efficiency, allowing users to accomplish more work with less fuel consumption, which is both cost-effective and environmentally friendly.

Another significant highlight of the Poulan 182705 is its lightweight construction. Weighing in at about 11 pounds, this chainsaw is easy to maneuver, making it suitable for extended use without causing excessive fatigue. Its well-balanced design enhances control during operation, contributing to safer handling, especially for users who may not have extensive experience with chainsaws.

Safety is paramount in using power tools, and the Poulan 182705 is equipped with several safety features to protect the user. It includes a trigger lockout to prevent accidental starting, a chain brake that stops the chain immediately in the event of kickback, and a low-kickback chain that minimizes the risk of unwanted movement during cutting.

The chainsaw also features an automatic oiling system, which lubricates the bar and chain during operation, ensuring smooth cutting and reducing wear on the equipment. This not only extends the life of the chainsaw but also allows for maintenance-free operation for extended periods.

Additionally, the Poulan 182705 incorporates an easy-start technology that simplifies the starting process, reducing the time and effort required to get to work. This is especially beneficial for users who may struggle with traditional pull-start mechanisms.

Overall, the Poulan 182705 offers a combination of power, efficiency, and safety features that make it an ideal choice for both occasional and regular use. Whether you are a homeowner taking care of seasonal yard work or a professional in need of a reliable chainsaw, the Poulan 182705 delivers performance and ease of use that stand out in the market.