Manuals / Brands / Lawn and Garden / Lawn Mower / Poulan / Lawn and Garden / Lawn Mower

Poulan 183048 TO REMOVE MOWER (See Fig. 17), TO INSTALL MOWER (See Fig. 17)

1 48

Download 48 pages, 1.79 Mb

20

SERVICE AND ADJUSTMENTS

CAUTION: BEFORE PERFORMING ANY SERVICE OR ADJUSTMENTS:

• Depress brake pedal fully and set parking brake.

• Place attachment clutch in “DISENGAGED” position.

• Turn ignition key “OFF” and remove key.

• Make sure the blades and all moving parts have completely stopped.

• Disconnect spark plug wire from spark plug and place wire where it cannot come in contact

with plug.

TRACTOR

FIG. 17

RETAINER

SPRINGS

(BOTH SIDES)

RETAINER

SPRINGS

(BOTH

SIDES)

ELECTRIC

CLUTCH

PULLEY

FRONT

LINK

SUSPENSION

ARMS

RETAINER

SPRING

ANTI-SWAY

BAR

TO REMOVE MOWER (See Fig. 17)

Mower will be easier to remove from the right side of tractor.

• Place attachment clutch switch in “DISENGAGED”

position.

• Move attachment lift lever forward to lower mower to its

lowest position.

• Roll belt off electric clutch pulley.

• Disconnect anti-sway bar from chassis bracket by

removing retainer spring.

• Disconnect suspension arms from rear deck brackets

by removing retainer springs.

• Disconnect front links from deck by removing retainer

springs.

• Raise lift lever to raise suspension arms. Slide mower

out from under tractor.

IMPORTANT: If an attachment other than the mower deck

is to be mounted on the tractor, remove the front links.

DEFLECTOR SHIELD

TO INSTALL MOWER (See Fig. 17)

• Raise attachment lift lever to its highest position.

• Slide mower under tractor with deflector shield to right

side of tractor.

• Lower lift lever to its lowest position.

• Connect front links to mower deck and secure with

retainer springs..

• Connect suspension arms to rear deck brackets and

secure with retainer springs.

• Connect anti-swaybar to chassis bracket and secure

with retainer spring.

• Install belt into electric clutch pulley groove.

Contents

Main PR20PH42STB Safe Operation Practices for Ride-On Mowers SAFETY RULES down Never Do not straight SAFETY RULES WARNING PRODUCT SPECIFICATIONS TABLE OF CONTENTS CUSTOMER RESPONSIBILITIES UNASSEMBLED PARTS TOOLS REQUIRED FOR ASSEMBLY TO REMOVE TRACTOR FROM CARTON UNPACK CARTON HOW TO SET UP YOUR TRACTOR CHECK BATTERY (See Fig. 2) INSTALL SEAT (See Fig. 3) TO ROLL TRACTOR OFF SKID (See Operation section for location and function of controls) TO DRIVE TRACTOR OFF SKID (See Opera- tion section for location and function of con- trols) TO SET UP YOUR MOWER FOR MULCHING INSTALL MULCHER PLATE (See Fig. 4) TO CONVERT TO BAGGING OR DISCHARGING CHECK TIRE PRESSURE CHECK MOWER LEVELNESS CHECKLIST WHILE LEARNING HOW TO USE YOUR TRACTOR, PAY EXTRA ATTENTION TO THE FOLLOWING IMPORTANT ITEMS: P KNOW YOUR TRACTOR READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR TRACTOR TO USE THROTTLE CONTROL (See Fig. 6) TO USE CHOKE CONTROL (See Fig. 6) TO MOVE FORWARD AND BACKWARD (See Fig. 6) HOW TO USE YOUR TRACTOR TO SET PARKING BRAKE (See Fig. 6) STOPPING (See Fig. 6) TO ADJUST MOWER CUTTING HEIGHT (See Fig. 6) TO OPERATE MOWER (See Fig. 8) TO OPERATE ON HILLS TO TRANSPORT (See Figs. 5 and 9) TOWING CARTS AND OTHER ATTACH- MENTS TO ADJUST GAUGE WHEELS (See Fig. 7) BEFORE STARTING THE ENGINE CHECK ENGINE OIL LEVEL PURGE TRANSMISSION MOWING TIPS MULCHING MOWING TIPS T R A C T 0 R MAINTENANCE SCHEDULE GENERAL RECOMMENDATIONS BEFORE EACH USE BRAKE OPERATION TIRES OPERATOR PRESENCE SYSTEM BLADE CARE BATTERY CLEAN AIR SCREEN TRANSAXLE COOLING TRANSAXLE PUMP FLUID CLEAN AIR INTAKE/COOLING AREAS AIR FILTER (See Fig. 15) MUFFLER SPARK PLUGS ENGINE OIL FILTER CLEANING IN-LINE FUEL FILTER (See Fig. 16) TO REMOVE MOWER (See Fig. 17) TO INSTALL MOWER (See Fig. 17) TO LEVEL MOWER HOUSING TO REPLACE MOWER BLADE DRIVE BELT (See Fig. 22) TRANSMISSION REMOVAL/REPLACEMENT TO ADJUST STEERING WHEEL ALIGNMENT FRONT WHEEL TOE-IN/CAMBER TO ADJUST BRAKE (See Fig. 23) TO REPLACE MOTION DRIVE BELT (See Fig. 24) TO REMOVE WHEEL FOR REPAIRS (See Fig. 25) TO START ENGINE WITH A WEAK BATTERY (See Fig. 26) REPLACING BATTERY (See Fig. 27) TO ADJUST THROTTLE CONTROL CABLE (See Fig. 29) TO REPLACE HEADLIGHT BULB INTERLOCKS AND RELAYS TO REPLACE FUSE TO REMOVE HOOD AND GRILL ASSEMBLY (See Fig. 28) TO ADJUST CARBURETOR STORAGE BATTERY FUEL SYSTEM ENGINE OIL CYLINDER(S) TROUBLESHOOTING POINTS PROBLEM CAUSE CORRECTION TROUBLESHOOTING POINTS PROBLEM CAUSE CORRECTION SCHEMATIC NON-REMOVABLE CONNECTIONS REMOVABLE CONNECTIONS RELAY PTO SWITCH Page ELECTRICAL Page CHASSIS AND ENCLOSURES Page DRIVE Page STEERING ASSEMBLY ENGINE OPTIONAL EQUIPMENT Spark Arrester SEAT ASSEMBLY WHEELS & TIRES DECALS MOWER LIFT TRACTOR - MODEL NUMBER PR20PH42STB MOWER DECK 105 104 102 Page Page Page LIMITED WARRANTY SUGGESTED GUIDE FOR SIGHTING SLOPES FOR SAFE OPERATION PARTS AND SERVICE FOR SERVICE OR REPLACEMENT PARTS: NOTE: