MAINTENANCE

TRACTOR

Always observe safety rules when performing any main- tenance.

BRAKE OPERATION

If tractor requires more than six (6) feet stopping distance at high speed in highest gear, then brake must be adjusted. (See “TO ADJUST BRAKE” in the Service and Adjustments section of this manual).

TIRES

•Maintain proper air pressure in all tires (See“PRODUCT SPECIFICATIONS” section of this manual).

•Keep tires free of gasoline, oil, or insect control chemi- cals which can harm rubber.

•Avoid stumps, stones, deep ruts, sharp objects and other hazards that may cause tire damage.

NOTE: To seal tire punctures and prevent flat tires due to slow leaks, tire sealant may be purchased from your local parts dealer. Tire sealant also prevents tire dry rot and corrosion.

OPERATOR PRESENCE SYSTEM

Be sure operator presence and interlock systems are work- ing properly. If your tractor does not function as described, repair the problem immediately.

•The engine should not start unless the clutch/brake pedal is fully depressed and attachement clutch control is in the disengaged position.

•When the engine is running, any attempt by the operator to leave the seat without first setting the parking brake should shut off the engine.

•When the engine is running and the attachment clutch is engaged, any attempt by the operator to leave the seat should shut off the engine.

•The attachment clutch should never operate unless the operator is in the seat.

BLADE CARE

For best results mower blades must be kept sharp. Replace bent or damaged blades.

BLADE REMOVAL (See Fig. 8)

•Raise mower to highest position to allow access to blades.

•Remove blade bolt, lock washer and flat washer se- curing blade.

•Install new or resharpened blade with trailing edge up towards deck as shown.

IMPORTANT: TO ENSURE PROPER ASSEMBLY, CENTER HOLE IN BLADE MUST ALIGN WITH STAR ON MANDREL ASSEMBLY.

•Reassemble blade bolt, lock washer and flat washer in exact order as shown.

•Tighten blade bolt securely (27-35 Ft. Lbs. torque).

IMPORTANT: BLADE BOLT IS GRADE 8 HEAT TREATED.

MANDREL

TRAILINGASSEMBLY EDGE UP

CENTER

HOLE

LOCK WASHER

STAR

FLAT WASHER

BLADE

 

BLADE BOLT (GRADE 8)*

*A GRADE 8 HEAT TREATED BOLT CAN BE IDENTIFIED BY SIX LINES ON THE BOLT HEAD.

FIG. 8

TO SHARPEN BLADE (See Fig. 9)

NOTE: We do not recommend sharpening blade - but if you do, be sure the blade is balanced.

Care should be taken to keep the blade balanced. An un- balanced blade will cause excessive vibration and eventual damage to mower and engine.

•The blade can be sharpened with a file or on a grind- ing wheel. Do not attempt to sharpen while on the mower.

•To check blade balance, you will need a 5/8" diameter steel bolt, pin, or a cone balancer. (When using a cone balancer, follow the instructions supplied with balancer.)

NOTE: Do not use a nail for balancing blade. The lobes of the center hole may appear to be centered, but are not.

•Slide blade on to an unthreaded portion of the steel bolt or pin and hold the bolt or pin parallel with the ground. If blade is balanced, it should remain in a horizontal position. If either end of the blade moves downward, sharpen the heavy end until the blade is balanced.

CENTER HOLE

5/8" BOLT

BLADE

OR PIN

 

FIG. 9

15

Page 14 Page 16
Page 15
Image 15
Poulan 183981 manual Tractor, Brake Operation, Tires, Operator Presence System, Blade Care
Page 14 Page 16

183981 specifications

The Poulan 183981 is a versatile and efficient chainsaw designed to cater to a variety of cutting tasks, making it an ideal choice for both homeowners and professionals. Known for its reliable performance, the Poulan 183981 combines innovative technology with user-friendly features to deliver exceptional results in outdoor projects.

At the heart of the Poulan 183981 is its powerful engine, which ensures high performance and durability. The engine is engineered for excellent fuel efficiency, providing users with extended run times and reduced emissions, contributing to a cleaner environment. This is particularly important for those engaged in prolonged cutting activities, as less time spent refueling means more time available for work.

One of the standout features of the Poulan 183981 is its lightweight design. Weighing less than some of its competitors, it allows for easier maneuverability and reduced fatigue during extended use. This ergonomic consideration makes the saw more accessible for novice users while still meeting the demands of seasoned professionals.

The Poulan 183981 incorporates an automatic oiling system that helps maintain the chain's lubrication during operation. This feature not only enhances the life of the chain and bar but also ensures smoother and more efficient cutting performance. With less maintenance needed, users can focus on the task at hand rather than worrying about the upkeep of their equipment.

Safety is another critical aspect of the Poulan 183981. It comes equipped with an inertia-activated chain brake, which provides an essential layer of safety by stopping the chain's movement in the event of kickback. This feature is particularly important for users who may encounter unexpected situations while cutting.

For added convenience, the Poulan 183981 features an easy-access air filter that simplifies cleaning and maintenance. This ensures optimal engine performance over time, allowing users to get the most out of their investment.

In terms of cutting capabilities, the Poulan 183981 features a high-quality cutting chain and bar that deliver precision and efficiency. Whether performing light pruning or tackling heavier jobs, this chainsaw is designed to handle a wide range of tasks with ease.

Overall, the Poulan 183981 is a well-rounded, reliable chainsaw that combines power, safety, and convenience. Its advanced technologies and practical features make it a valuable tool for anyone looking to enhance their outdoor cutting experience.
Top Page Image Contents