ASSEMBLY

Your new tractor has been assembled at the factory with exception of those parts left unassembled for shipping purposes. To ensure safe and proper operation of your tractor all parts and hardware you assemble must be tightened securely. Use the correct tools as necessary to insure proper tightness.

TOOLS REQUIRED FOR ASSEMBLY

A socket wrench set will make assembly easier. Standard wrench sizes are listed.

(1) 9/16" wrench

Utility knife

(1) 3/4" wrench

Tire pressure gauge

Pliers

 

When right or left hand is mentioned in this manual, it means when you are in the operating position (seated behind the steering wheel).

TO REMOVE TRACTOR FROM CARTON

UNPACK CARTON

•Remove all accessible loose parts and parts cartons from carton.

•Cut along dotted lines on all four panels of carton. Remove end panels and lay side panels flat.

•Check for any additional loose parts or cartons and remove.

BEFORE REMOVING TRACTOR FROM SKID

ATTACH STEERING WHEEL (See Fig. 1)

•Remove locknut and large flat washer from steering shaft.

•Position front wheels of the tractor so they are pointing straight forward.

•Slide the steering sleeve over the steering shaft.

•Position steering wheel so cross bars are horizontal (left to right) and slide onto steering wheel adapter.

•Secure steering wheel to steering shaft with locknut and large flat washer previously removed. Tighten securely.

•Snap steering wheel insert into center of steering wheel.

•Remove protective materials from tractor hood and grill.

IMPORTANT: CHECK FOR AND REMOVE ANY STAPLES IN SKID THAT MAY PUNCTURE TIRES WHERE TRACTOR IS TO ROLL OFF SKID.

STEERING WHEEL

INSERT

LOCK NUT

LARGE FLAT WASHER

STEERING WHEEL

STEERING WHEEL ADAP- TOR

STEERING

SHAFT

STEERING

SLEEVE

FIG. 1

INSTALL SEAT (See Fig. 2)

Adjust seat before tightening adjustment knob.

•Remove adjustment knob and flat washer securing seat to cardboard packing and set aside for assembly of seat to tractor.

•Pivot seat upward and remove from the cardboard pack- ing. Remove the cardboard packing and discard.

•Place seat on seat pan so head of shoulder bolt is positioned over large slotted hole in pan.

•Push down on seat to engage shoulder bolt in slot and pull seat towards rear of tractor.

•Pivot seat and pan forward and assemble adjustment knob and flat washer loosely. Do not tighten.

•Lower seat into operating position and sit on seat.

•Slide seat until a comfortable position is reached which allows you to press clutch/brake pedal all the way down.

•Get off seat without moving its adjusted position.

•Raise seat and tighten adjustment knob securely.

6

Page 5 Page 7
Page 6
Image 6
Poulan 194993 manual Tools Required for Assembly, To Remove Tractor from Carton, Before Removing Tractor from Skid
Page 5 Page 7

194993 specifications

The Poulan 194993 is a noteworthy string trimmer designed to provide efficiency and durability for both residential and commercial users. Offering a blend of power and innovative features, this trimmer is a great choice for those looking to maintain their lawns and gardens with precision.

One of the defining characteristics of the Poulan 194993 is its powerful engine. It is equipped with a 25cc two-cycle engine, which provides ample power to tackle tough weeds and grass while ensuring a lightweight, easy-to-maneuver design. This combination makes it suitable for various tasks, from trimming delicate flower beds to clearing overgrown areas.

A standout feature of the Poulan 194993 is its Smart Start technology, which allows for easy starting with minimal effort. This technology reduces the resistance in the starter cord by up to 40%, making it possible for users to start the engine quickly and effortlessly, even after extended periods of storage. This feature is particularly helpful for those who may struggle with traditional pull-start trimmers.

The trimmer also boasts a dual-line feed system, which enhances cutting efficiency. The dual-line design allows for a wider cutting path, significantly reducing the time spent on trimming tasks. The semi-automatic feed spool makes it easy to advance the line, ensuring a consistent cutting performance without the need for manual adjustments.

Ergonomically designed, the Poulan 194993 ensures user comfort during operation. It features an adjustable handle that can be customized to suit individual preferences, reducing fatigue during prolonged use. The lightweight construction further complements its ease of handling, making it an ideal choice for long days of yard work.

In addition, this trimmer incorporates a durable construction that withstands the rigors of regular use. The rugged materials used in its design ensure longevity, making it a reliable option for homeowners and professionals alike.

Overall, the Poulan 194993 offers a well-rounded solution for those looking for an effective and user-friendly string trimmer. With its powerful engine, innovative features, and ergonomic design, it stands out as a top choice for maintaining vibrant and well-groomed outdoor spaces. Whether tackling everyday grass trimming or handling more challenging jobs, the Poulan 194993 proves to be a valuable addition to any gardening toolkit.
Top Page Image Contents