SERVICE AND ADJUSTMENTS

WEAK OR DEAD BATTERY

FULLY CHARGED

BATTERY

TO REPLACE HEADLIGHT BULB

•Raise hood.

•Pull bulb holder out of the hole in the backside of the grill.

•Replace bulb in holder and push bulb holder securely back into the hole in the backside of the grill.

•Close hood.

INTERLOCKS AND RELAYS

Loose or damaged wiring may cause your tractor to run poorly, stop running, or prevent it from starting.

•Check wiring. See electrical wiring diagram in the Repair Parts section.

FIG. 25

REPLACING BATTERY (See Fig. 26)

TO REPLACE FUSE

Replace with 20 amp automotive-type plug-in fuse. The fuse holder is located behind the dash.

WARNING: Do not short battery terminals by allowing a wrench or any other object to contact both terminals at the same time. Before connect- ing battery, remove metal bracelets, wristwatch bands, rings, etc.

Positive terminal must be connected first to prevent sparking from acci- dental grounding.

•Lift hood to raised position.

•Remove terminal guard.

•Disconnect BLACK battery cable then RED battery cable and carefully remove battery from tractor.

•Install new battery with terminals in same position as old battery.

•Reinstall terminal guard.

•First connect RED battery cable to positive (+) battery terminal with hex bolt and keps nut as shown. Tighten securely.

•Connect BLACK grounding cable to negative (-) battery terminal with remaining hex bolt and keps nut. Tighten securely

•Close terminal access doors.

•Close hood.

TO REMOVE HOOD AND GRILL ASSEMBLY (See Fig. 27)

•Raise hood.

•Unsnap headlight wire connector.

•Stand in front of tractor. Grasp hood at sides, tilt toward engine and lift off of tractor.

•To replace, reverse above procedure.

HOOD

HEADLIGHT

WIRE

CONNECTOR

02141

FIG. 27

TERMINAL ACCESS DOOR

KEPS NUT

HEX BOLT

POSITIVE (RED)

CABLE

ENGINE

TO ADJUST THROTTLE CONTROL CABLE

The throttle control has been preset at the factory and adjustment should not be necessary. If adjustment is nec- essary, see engine manual.

TERMINAL GUARD

NEGATIVE (BLACK)

CABLE

TO ADJUST CHOKE CONTROL

The choke control has been preset at the factory and ad- justment should not be necessary. If adjustment is neces- sary, see engne manual.

FIG. 26

TO ADJUST CARBURETOR

Your carburetor is not adjustable. If your engine does not operate properly due to suspected carburetor problems, take your tractor to an authorized service center for repair

23and/or adjustment.

Page 22 Page 24
Page 23
Image 23
Poulan 196692 manual To Replace Headlight Bulb, Interlocks and Relays, To Replace Fuse, To Adjust Throttle Control Cable
Page 22 Page 24

196692 specifications

The Poulan 196692 is a versatile and powerful chainsaw designed for both professional and home use. With a robust set of features, this chainsaw combines efficiency, durability, and ease of use, making it a popular choice among tree care professionals and DIY enthusiasts alike.

One of the standout features of the Poulan 196692 is its potent 50cc engine. This engine provides ample power for cutting through thick branches and logs, delivering reliable performance under demanding conditions. The chainsaw also boasts a 20-inch bar, which allows for a large cutting capacity, enabling users to tackle various outdoor tasks seamlessly, from limb trimming to tree felling.

In terms of technology, the Poulan 196692 incorporates advanced anti-vibration technology. This feature significantly reduces the amount of vibration transferred to the user, making it more comfortable to operate for extended periods. This is particularly beneficial for those who find themselves engaged in heavy cutting tasks, as it minimizes fatigue and helps maintain precision.

Another important characteristic of the Poulan 196692 is its easy starting system. The chainsaw is equipped with a spring-assist starter, ensuring that users can start the machine with minimal effort. This technology is especially useful for those who may struggle with traditional pull-start systems, as it enhances the overall user experience.

Safety is also a paramount consideration in the design of the Poulan 196692. The chainsaw features a chain brake system that can be activated quickly in the event of kickback, providing an extra layer of protection for the operator. Additionally, it includes a low-kickback chain, which is engineered to reduce the risk of kickback accidents, making it a safer option for those new to using chainsaws.

The Poulan 196692 also emphasizes ease of maintenance. The tool-less chain tensioning system allows users to adjust the chain tension without needing additional tools, streamlining the maintenance process and ensuring optimal performance. The air filter is easily accessible, promoting regular cleaning and upkeep, which contributes to the longevity of the chainsaw.

In conclusion, the Poulan 196692 emerges as a formidable chainsaw that blends power, safety, and user-friendly features. Its strong engine, anti-vibration technology, easy starting system, and safety enhancements make it an excellent choice for anyone looking to invest in a reliable and efficient chainsaw for their outdoor tasks. Whether trimming large branches or cutting firewood, the Poulan 196692 is designed to meet the demands of a variety of cutting jobs.
Top Page Image Contents