Manuals / Poulan / Lawn and Garden / Lawn Mower

Poulan 197498 manual Mowing Tips, Purge Transmission, Automatic Transmission Warm UP

Models: 197498

1 30
Download 30 pages 12.47 Kb
Page 14
Image 14

OPERATION

AUTOMATIC TRANSMISSION WARM UP

•Before driving the unit in cold weather, the transmission should be warmed up as follows:

•Be sure the tractor is on level ground.

•Place the motion control lever in neutral. Release the parking brake and let the clutch/brake slowly return to operating position.

•Allow one minute for transmission to warm up.This can be done during the engine warm up period.

•The attachments can be used during the engine warm-up period after the transmission has been warmed up and may require the choke control be pulled out slightly.

NOTE: If at a high altitude (above 3000 feet) or in cold temperatures (below 32 F) the carburetor fuel mixture may need to be adjusted for best engine performance. See “TO ADJUST CARBURETOR” in the Service and Adjustments section of this manual.

PURGE TRANSMISSION

CAUTION: Never engage or disengage freewheel lever while the engine is run-

ning.

To ensure proper operation and performance, it is recom- mended that the transmission be purged before operating tractor for the first time. This procedure will remove any trapped air inside the transmission which may have de- veloped during shipping of your tractor.

IMPORTANT: SHOULD YOUR TRANSMISSION REQUIRE REMOVAL FOR SERVICE OR REPLACEMENT, IT SHOULD BE PURGED AFTER REINSTALLATION BEFORE OPERATING THE TRACTOR.

•Place tractor safely on level surface with engine off and parking brake set.

•Disengage transmission by placing freewheel control in freewheeling position (See “TO TRANSPORT” in this section of manual).

•Sitting in the tractor seat, start engine. After the engine is running, move throttle control to slow position. With motion control lever in neutral (N) position, slowly dis- engage clutch/brake pedal.

•Move motion control lever to full forward position and hold for five (5) seconds. Move lever to full reverse position and hold for five (5) seconds. Repeat this procedure three (3) times.

NOTE: During this procedure there will be no movement of drive wheels. The air is being removed from hydraulic drive system.

•Move motion control lever to neutral (N) position. Shut- off engine and set parking brake.

•Engage transmission by placing freewheel control in engaged position (See “TO TRANSPORT” in this sec- tion of manual).

•Sitting in the tractor seat, start engine. After the engine is running, move throttle control to half (1/2) speed. With motion control lever in neutral (N) position, slowly disengage clutch/brake pedal.

•Slowly move motion control lever forward, after the tractor moves approximately five (5) feet, slowly move motion control lever to reverse position. After the tractor moves approximately five (5) feet return the motion control lever to the neutral (N) position. Repeat this procedure with the motion control lever three (3) times.

•Your transmission is now purged and now ready for normal operation.

MOWING TIPS

•Mower should be properly leveled for best mowing per- formance. See “TO LEVEL MOWER HOUSING” in the Service and Adjustments section of this manual.

•The left hand side of mower should be used for trim- ming.

•Drive so that clippings are discharged onto the area that has been cut. Have the cut area to the right of the machine. This will result in a more even distribution of clippings and more uniform cutting.

•When mowing large areas, start by turning to the right so that clippings will discharge away from shrubs, fences, driveways, etc. After one or two rounds, mow in the opposite direction making left hand turns until finished (See Fig. 10).

FIG. 10

•If grass is extremely tall, it should be mowed twice to reduce load and possible fire hazard from dried clip- pings. Make first cut relatively high; the second to the desired height.

•Do not mow grass when it is wet. Wet grass will plug mower and leave undesirable clumps. Allow grass to dry before mowing.

•Always operate engine at full throttle when mow- ing to assure better mowing performance and proper discharge of material. Regulate ground speed by se- lecting a low enough gear to give the mower cutting performance as well as the quality of cut desired.

•When operating attachments, select a ground speed that will suit the terrain and give best performance of the attachment being used.

14

Page 13 Page 15
Page 14
Image 14
Poulan 197498 manual Mowing Tips, Purge Transmission, Automatic Transmission Warm UP
Page 13 Page 15

197498 specifications

The Poulan 197498 is a versatile and high-performing piece of outdoor equipment designed primarily for lawn care enthusiasts and professionals alike. Known for its reliability and efficiency, this product delivers an impressive array of features that cater to various mowing needs.

At the heart of the Poulan 197498 is its powerful engine, which provides robust performance capable of tackling even the toughest grass and terrain. This engine is engineered for optimal fuel efficiency, allowing users to maximize their mowing time without frequent refueling. Its starting system is designed for user-friendliness, featuring advanced technology that minimizes start-up issues, ensuring a hassle-free experience.

One of the standout features of the Poulan 197498 is its cutting deck. With a wide cutting path, this mower can cover more ground in less time, making it an ideal choice for larger lawns. The adjustable cutting height settings allow users to customize their mowing experience based on grass type and desired length. This flexibility ensures a clean and professional finish every time.

In terms of technology, the Poulan 197498 incorporates innovative engineering that enhances maneuverability. Its lightweight design, coupled with smooth-rolling wheels, enables easy navigation around obstacles, making it suitable for intricate yard layouts. The mower's ergonomic handles provide a comfortable grip, reducing fatigue during extended use.

Durability is another key characteristic of the Poulan 197498. Constructed with high-quality materials, this mower is built to withstand the rigors of regular use. Its robust chassis and reliable components ensure longevity, making it a wise investment for anyone serious about lawn maintenance.

Additionally, the Poulan 197498 features easy maintenance solutions. Quick-release mechanisms allow for straightforward blade changes and deck cleaning, keeping the mower in optimal working condition and prolonging its lifespan.

In conclusion, the Poulan 197498 stands out as a reliable and efficient lawn mower, blending power, versatility, and durability into one impressive machine. Its user-friendly features and advanced technologies make it an excellent choice for both residential homeowners and professional landscapers seeking an effective solution for their mowing tasks. With the Poulan 197498, achieving a perfectly manicured lawn is just a mow away.