MAINTENANCE

GENERAL RECOMMENDATIONS

The warranty on this snow thrower does not cover items that have been subjected to operator abuse or negligence. To receive full value from the warranty, operator must maintain snow thrower as instructed in this manual. Some adjust- ments will need to be made periodically to properly maintain your snow thrower. All adjustments in the Service and Adjustments section of this manual should be checked at least once each season.

•Once a year, you should replace the spark plug and check belts for wear. A new spark plug will help your engine run better and last longer.

•Follow the maintenance schedule in this manual.

NOTE: Use only Original Equipment Manufacturer (OEM) parts to service this unit. Failure to do so can cause the unit to malfunction and pose a risk of injury to the operator.

BEFORE EACH USE

1.Check engine oil level.

2.Check for loose fasteners.

3.Check controls to be sure they are functioning properly.

LUBRICATION

Keep your snow thrower well lubricated (See “LUBRICATION CHART”).

LUBRICATION CHART

➀SAE 30 Motor Oil

➁ See “ENGINE” in

Maintenance section

➀ Pivot points

➁

Engine oil

SNOW THROWER

Always observe the safety rules when performing any maintenance.

TIRES

•Maintain proper air pressure in both tires (14–17 PSI).

•Keeptiresfreeofgasolineandoil,whichcanharmrubber.

NOTE: To seal tire punctures and prevent flat tires due to slow leaks, tire sealant may be purchased from your local parts dealer. Tire sealant also prevents tire dry rot and corrosion.

V-BELTS

Check V-belts for deterioration and wear after every 50 hours of operation and replace if necessary. The belts are not adjustable. Replace belts if they begin to slip from wear. (See “TO REMOVE BELT COVER” in the Service and Adjustments section of this manual).

The V-belts on your snow thrower are of special construction and should be replaced by original equipment manufacturer (OEM) belts available from your nearest dealer. Using other than OEM belts can cause personal injury or damage to

13 the snow thrower.

Page 12 Page 14
Page 13
Image 13
Poulan 199350 owner manual Maintenance
Page 12 Page 14

199350 specifications

The Poulan 199350 is a remarkable chainsaw designed for both amateur enthusiasts and professional users who require reliability and power for various cutting tasks. This model is known for its robust performance, making it a popular choice for homeowners and professionals alike.

One of the key features of the Poulan 199350 is its potent 50cc gas engine, which delivers impressive cutting power. This engine is engineered to provide high torque, allowing it to easily cut through thick branches and even small trees. The balanced design of the chainsaw ensures that users can maneuver it effortlessly, reducing fatigue during extended use.

A standout characteristic of the Poulan 199350 is its efficient air filtration system. This innovative feature helps to prolong the life of the engine by keeping dirt and debris from entering critical components. The air filter is easy to access and clean, which is vital for maintaining optimal performance and reliability over time.

In terms of safety, the Poulan 199350 is equipped with a chain brake system that provides an added layer of protection against kickback. This safety feature ensures that the chain stops quickly in the event of unexpected movement, giving users peace of mind while operating the saw. Additionally, the chainsaw has a low kickback chain that further minimizes the chances of accidents.

The Poulan 199350 also boasts an automatic oiler that maintains the chain's lubrication, which is crucial for smooth operation and reduced wear. This convenience allows users to focus on their cutting tasks without the hassle of manual lubrication.

Another significant advantage of the Poulan 199350 is its lightweight design, which enhances portability and ease of use. Weighing around 12 pounds, this chainsaw is easy to transport and handle, making it suitable for a variety of outdoor projects, from trimming and pruning to felling small trees.

Moreover, its tool-less chain tensioning feature allows for quick adjustments, ensuring that the chain remains at the ideal tension at all times. This attribute is particularly beneficial for users who require quick setup and operation while on the job.

In conclusion, the Poulan 199350 stands out in the chainsaw market due to its powerful engine, advanced safety features, efficient air filtration, and user-friendly design. Whether for home maintenance or professional landscaping, this chainsaw delivers exceptional performance and reliability, making it an excellent investment for anyone in need of a quality cutting tool.
Top Page Image Contents