![](/images/new-backgrounds/1167126/1671269x1.webp)
Symmetrical Guide Bar
Large Radius Tip
S
Contoured Depth Gauge
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Elongated Guard Link | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
|
|
| Deflects | ||||
kickback force | |||||||||||||||||
and allows wood | |||||||||||||||||
Chain | |||||||||||||||||
to gradually ride | |||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
| into cutter | ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Can Obstruct Material |
Not a
SFront Hand Guard, designed to reduce the
chance of your left hand contacting the chain if your hand slips off the front handlebar.
SPosition of front and rear handlebars, de- signed with distance between handles and
CHAIN BRAKE AND CKA ANGLE
SChain Brake, designed to stop the chain in the event of kickback.
WARNING: WE DO NOT REP- RESENT AND YOU SHOULD NOT AS- SUME THAT THE CHAIN BRAKE WILL PROTECT YOU IN THE EVENT OF A KICKBACK. Kickback is a lightning fast ac- tion which throws the bar and rotating chain back and up toward the operator. Kickback can be caused by allowing contact of the bar tip in the danger zone with any hard object. Kickback can also be caused by pinching the saw chain along the top of the guide bar. This
Computed kickback angle (CKA) Table
action may push the guide bar rapidly back toward the operator. Either of these events may cause you to lose control of the saw which could result in serious injury or even death. DO NOT RELY UPON ANY OF THE DEVICES BUILT INTO YOUR SAW. YOU SHOULD USE THE SAW PROPERLY AND CAREFULLY TO AVOID KICKBACK. Re-
STip contact in some cases may cause a light- ning fast reverse REACTION, kicking the guide bar up and back toward the operator.
SPinching the saw chain along the top of the
guide bar may push the guide bar rapidly back toward the operator.
SEither of these reactions may cause you to lose control of the saw which could result in serious injury.Do not rely exclusively upon the safety devices built into your saw.
WARNING: Computed kickback angle (CKA) listed on your saw and listed in the CKA table below represents angle of kickback your bar and chain combinations will have when tested in accordance with CSA and ANSI standards. When purchasing replacement bar and chain, considerations should be given to the lower CKA values. Lower CKA values represent safer angles to the user, higher values indicate more angle and higher kick energies. Computed angles represented in the
| BAR |
|
|
| CKA without chain brake |
|
MODEL | P/N | Length |
| CHAIN P/N |
| |
221 LE | 530044834 | 16! |
| 530051480 | 8_ |
|
NOTE: If this saw is to be used for commer- | SAFETY NOTICE: Exposure to vibrations | |||||
cial logging, a chain brake is required and shall | through prolonged use of gasoline powered | |||||
not be removed or otherwise disabled to com- | hand tools could cause blood vessel or nerve | |||||
ply with Federal OSHA Regulations for Com- | damage in the fingers, hands, and joints of | |||||
mercial Logging. |
|
|
| people prone to circulation disorders or | ||
|
|
|
| abnormal swellings. Prolonged use in cold |
weather has been linked to blood vessel damage in otherwise healthy people. If
5