Checking the tension, Adjusting the tension

Mount the Bar

Tip of Bar

Proper chain direction

Chain moves freely

Lifts only 1/8 of an inch from bar.

Bar clamp nuts

Place chain onto the sprocket	Adjusting screw

CHAIN TENSION (Including units with chain already installed)

NOTE: When making adjustments to the chain tension make sure the bar nuts are finger tight only. Attempting to tension the chain when the bar nuts are tight can cause damage.

Checking the tension:

Use the screwdriver end of the assembly tool to move the chain around the bar. If the chain does not rotate, it is too tight. If the chain is too loose, it will sag below the bar.

Adjusting the tension:

Chain tension is very important. Chain stretches during use. This is especially true during the first few times you use your saw. Always check chain tension each time you use and refuel your saw.

You can adjust the chain tension by loosen- ing the bar clamp nuts finger tight and turning the adjusting screw 1/4 of a turn while lifting up on the bar.

SIf chain is too tight, turn adjusting

screw 1/4 turn counterclockwise.

SIf chain is too loose, turn adjusting screw 1/4 turn clockwise.

SLift up the tip of the bar and tighten the bar clamp nuts with the combination screw- driver/wrench.

SRecheck chain tension.

FUELING ENGINE

This engine is certified to operate on unleaded gasoline. Before operation, gasoline must be mixed with a good quality

2-cycle air-cooled engine oil. We recommend Poulan or Poulan ProR brand oil. If you do not use this oil, use a good quality 2-cycle air-cooled oil designed to be mixed at a ratio of 40:1 (A 40:1 ratio is obtained by mixing 3.2 onces of oil with 1 gallon of unleaded gasoline). When mixing fuel follow the instructions printed on the container. Always read and follow the safety rules relating to fuel before fueling your unit.

BAR AND CHAIN LUBRICATION

The bar and chain require continuous lubri- cation. Lubrication is provided by the auto- matic oiler system when the oil tank is kept filled. Lack of oil will quickly ruin the bar and chain. Too little oil will cause overheating shown by smoke coming from the chain and/ or discoloration of the bar.

In freezing weather oil will thicken, making it necessary to thin bar and chain oil with a small amount (5 to 10%) of #1 Diesel Fuel or kerosene. Bar and chain oil must be free flowing for the oil system to pump enough oil for adequate lubrication.

Genuine Poulan or Poulan Pro bar and chain oil is recommended to protect your unit against excessive wear from heat and

2750 specifications

The Poulan 2750 is a robust and versatile chainsaw that caters to both average homeowners and professional users. Designed for cutting firewood, pruning trees, and participating in various yard maintenance tasks, this chainsaw combines power and efficiency with user-friendly features.

At the heart of the Poulan 2750 is its powerful 2-cycle engine, which delivers impressive horsepower for demanding tasks. With a displacement of 50cc, this engine ensures that the chainsaw can handle thick branches and tough tree trunks with ease. The higher RPM (revolutions per minute) capability allows for faster cutting without compromising safety, making it an ideal choice for those who need to get the job done quickly.

One of the standout features of the Poulan 2750 is its patented PureFire engine technology. This innovation not only enhances fuel efficiency but also significantly reduces emissions, promoting a more environmentally friendly operation. Users can enjoy peace of mind knowing they are reducing their carbon footprint while completing their projects.

The 16-inch cutting bar of the Poulan 2750 provides an excellent balance between maneuverability and cutting capacity. This length is suitable for a wide range of tasks, from delicate pruning to heavy-duty cutting. Moreover, the chainsaw is equipped with a low-kickback chain, enhancing safety during operation, especially for inexperienced users.

Ease of use is further complemented by features such as an automatic oiler, which ensures that the chain remains lubricated throughout operation. This not only prolongs the life of the chain and bar but also maintains optimal performance. Additionally, the chainsaw features an easy-to-access air filter and spark plug, allowing for simplified maintenance and quicker tune-ups.

The Poulan 2750 is also designed with user comfort in mind. Its lightweight body and ergonomic handle help reduce fatigue during extended use, while its anti-vibration system absorbs shocks, making the chainsaw easier and more comfortable to control.

Overall, the Poulan 2750 is an excellent choice for those seeking a reliable and efficient chainsaw. With powerful performance, advanced technologies, and user-centric features, it stands out in the competitive landscape of outdoor power equipment. Whether you're a seasoned professional or a casual homeowner, the Poulan 2750 offers the performance and reliability needed for tackling various cutting tasks.

Poulan 2750 Chain Tension Including units with chain already installed, Checking the tension

Models: 2750