SERVICE AND ADJUSTMENTS

G

H

B

A

C

J

D

E

F

02953 electric

FIG. 30

TO CHECK BRAKE

If tractor requires more than five (5) feet to stop at highest speed in highest gear on a level, dry concrete or paved surface, then brake must be serviced.

You may also check brake by:

•Park tractor on a level, dry concrete or paved surface, depress brake pedal all the way down and engage parking brake.

•Disengage transmission by placing freewheel control in “transmission disengaged” position. Pull freewheel control out and into the slot and release so it is held in the disengaged position.

The rear wheels must lock and skid when you try to manu- ally push the tractor forward. If the rear wheels rotate, then the brake needs to be serviced. Contact a qualified service center.

FRONT WHEEL TOE-IN/CAMBER

Your new tractor front wheel toe-in and camber is set at the factory and is normal. The front wheel toe-in and camber are not adjustable. If damage has occurred to affect the factory set front wheel toe-in or camber, contact a qualified service center.

TO REMOVE WHEEL FOR REPAIRS (See Fig. 31)

•Block up axle securely.

•Remove axle cover, retaining ring and washers to allow wheel removal (rear wheel contains a square key - Do not lose).

•Repair tire and reassemble.

•On rear wheels only: align grooves in rear wheel hub and axle. Insert square key.

•Replace washers and snap retaining ring securely in axle groove.

•Replace axle cover.

NOTE: To seal tire punctures and prevent flat tires due to slow leaks, tire sealant may be purchased from your local parts dealer. Tire sealant also prevents tire dry rot and corrosion.

WASHERS

RETAINING

RING

AXLE COVER

SQUARE KEY (REAR

WHEEL ONLY)

FIG. 31

TO START ENGINE WITH A WEAK BATTERY (See Fig. 32)

WARNING: Lead-acid batteries gen- erate explosive gases. Keep sparks, flame and smoking materials away from batteries. Always wear eye protection when around batteries.

If your battery is too weak to start the engine, it should be recharged. (See "BATTERY" in the MAINTENANCE sec- tion of this manual).

If “jumper cables” are used for emergency starting, follow this procedure:

IMPORTANT: YOUR TRACTOR IS EQUIPPED WITH A 12 VOLT SYSTEM. THE OTHER VEHICLE MUST ALSO BE A 12 VOLT SYSTEM. DO NOT USE YOUR TRACTOR BATTERY TO START OTHER VEHICLES.

TO ATTACH JUMPER CABLES -

•Connect one end of the RED cable to the POSITIVE

(+)terminal of each battery(A-B), taking care not to short against tractor chassis.

•Connect one end of the BLACK cable to the NEGATIVE (-) terminal (C) of fully charged battery.

•Connect the other end of the BLACK cable (D) to good chassis ground, away from fuel tank and battery.

TO REMOVE CABLES, REVERSE ORDER -

•BLACK cable first from chassis and then from the fully charged battery.

•RED cable last from both batteries.

23

Page 22 Page 24
Page 23
Image 23
Poulan 960420022, 404402 manual To Check Brake, Front Wheel TOE-IN/CAMBER, To Remove Wheel for Repairs See Fig
Page 22 Page 24

960420022, 404402 specifications

The Poulan 960420022,404402 is a well-regarded chainsaw recognized for its blend of performance, durability, and user-friendly features. Manufactured by Poulan, a brand known for its commitment to delivering high-quality outdoor power equipment, this model is designed to meet the needs of both professional landscapers and home users alike.

At the heart of the Poulan 960420022,404402 is its powerful engine. Equipped with a robust two-stroke engine, this chainsaw can produce ample power for cutting through tough wood and tackling various outdoor tasks. The engine is designed with fuel efficiency in mind, allowing users to operate for extended periods without frequent refueling. Its quick-start technology ensures that users can get to work without the frustration of lengthy startup times.

One of the standout features of the Poulan 960420022,404402 is its low-vibration design. This technology not only enhances user comfort during operation but also reduces fatigue, making it ideal for prolonged use. The handle is ergonomically designed to provide a secure grip, ensuring maximum control while cutting.

Another notable characteristic is the chainsaw’s automatic oiler system. This feature provides continuous lubrication to the chain and bar, minimizing wear and ensuring smooth operation. Regular maintenance is simplified, as the tool-free chain tensioning system allows users to easily adjust the chain without the need for additional tools.

Safety is a primary concern for any power tool, and the Poulan 960420022,404402 incorporates several safety features. It includes a chain brake, which acts quickly in the event of kickback, providing an extra layer of protection for users. A transparent fuel tank allows for easy monitoring of fuel levels, further enhancing safety and preventing operational interruptions.

The Poulan 960420022,404402 is compatible with various bar lengths, allowing users to customize their chainsaw for different tasks, from tree trimming to firewood preparation. This adaptiveness makes it a versatile choice for anyone looking to invest in a reliable chainsaw.

In summary, the Poulan 960420022,404402 stands out with its powerful engine, low-vibration design, automatic oiler system, easy chain adjustment, and essential safety features. Whether tackling large projects or performing routine yard maintenance, this chainsaw offers the performance and reliability users expect from a trusted brand.
Top Page Image Contents