ASSEMBLY
•ATTACH MOWER SIDE SUSPENSION ARMS (A) TO CHASSIS - Position hole in arm over pin (B) on outside of tractor chassis and secure with washer and retainer spring.
•Repeat on opposite side of tractor.
A
B
FIG. 8
•ATTACH REAR LIFT LINKS (C) - Insert rod end of lift link assembly into hole in tractor lift shaft suspension arm (L) and pivot link down to mower. Lift rear corner of mower and position slot in link assembly over pin on rear mower bracket (D) and secure with washer and retainer spring.
•Repeat on opposite side of tractor.
L
C
D
•Turn steering wheel to position wheels straight for- ward.
•ATTACH FRONT LINK (E) - Work from left side of tractor. Insert rod end of link assembly through front hole in tractor front suspension bracket (F) and secure with7/16 retainer spring (G) through hole in link located behind the bracket.
•Insert other end of link (E) into hole in front mower bracket (H) and secure with washer and 5/16 retainer spring (J).
5/16
E H J
FG 7/16
FIG. 10
•Disengage belt tension rod (K) from locking bracket
(L).
•Install belt onto engine clutch pulley (M).
IMPORTANT: Check belt for proper routing in all mower pulley grooves.
FIG. 9
LB
M
K
AF
E
H
S
C
D |
FIG. 11
8
