SAFETY RULES

Safe Operation Practices for Walk-Behind Powered Rotary Tillers

TRAINING

Read the Manual carefully. Be thoroughly familiar with the controls and the proper use of the equipment. Know how to stop the unit and disengage the controls quickly.

Never allow children to operate the equipment. Never allow adults to operate the equipment without proper instruction.

Keep the area of operation clear of all persons, par- ticularly small children, and pets.

Never operate the tiller without proper guards, plates, or other safety protective devices in place.

Keep children and pets away.

Do not overload the machine capacity by attempting to till too deep at too fast a rate.

Never operate the machine at high speeds on slippery surfaces. Look behind and use care when backing.

Never allow bystanders near the unit.

Use only attachments and accessories approved by the manufacturer of the tiller.

PREPARATION

Thoroughly inspect the area where the equipment is to be used and remove all foreign objects.

Disengage all clutches and shift into neutral before starting the engine (motor).

Never operate the tiller without good visibility or light.

Be careful when tilling in hard ground. The tines may catch in the ground and propel the tiller forward. If this occurs, let go of the handlebars and do not restrain the machine.

Do not operate the equipment without wearing ade- quate outer garments. Wear footwear that will improve footing on slippery surfaces.

Handle fuel with care; it is highly flammable.

Use an approved fuel container.

Never add fuel to a running engine or hot engine.

Fill fuel tank outdoors with extreme care. Never fill fuel tank indoors.

Replace gasoline cap securely and clean up spilled fuel before restarting.

Use extension cords and receptacles as specified by the manufacturer for all units with electric drive motors or electric starting motors.

Never attempt to make any adjustments while the engine (motor) is running (except where specifically recommended by manufacturer).

OPERATION

Do not put hands or feet near or under rotating parts.

Exercise extreme caution when operating on or cross- ing gravel drives, walks, or roads. Stay alert for hidden hazards or traffic. Do not carry passengers.

After striking a foreign object, stop the engine (motor), remove the wire from the spark plug, thoroughly inspect the tiller for any damage, and repair the damage before restarting and operating the tiller.

Exercise caution to avoid slipping or falling.

If the unit should start to vibrate abnormally, stop the engine (motor) and check immediately for the cause. Vibration is generally a warning of trouble.

Stop the engine (motor) when leaving the operating position.

Take all possible precautions when leaving the machine unattended. Disengage the tines, shift into neutral, and stop the engine.

Before cleaning, repairing, or inspecting, shut off the engine and make certain all moving parts have stopped. Disconnect the spark plug wire, and keep the wire away from the plug to prevent accidental starting. Disconnect the cord on electric motors.

Do not run the engine indoors; exhaust fumes are dangerous.

2

MAINTENANCE AND STORAGE

Keep machine, attachments, and accessories in safe working condition.

Check shear pins, engine mounting bolts, and other bolts at frequent intervals for proper tightness to be sure the equipment is in safe working condition.

Never store the machine with fuel in the fuel tank inside a building where ignition sources are present, such as hot water and space heaters, clothes dryers, and the like. Allow the engine to cool before storing in any enclosure.

Always refer to the operator’s guide instructions for important details if the tiller is to be stored for an ex- tended period.

- IMPORTANT -

CAUTIONS, IMPORTANTS, AND NOTES ARE A MEANS OF ATTRACTING ATTENTION TO IMPORTANT OR CRITICAL INFORMATION IN THIS MANUAL.

IMPORTANT: USED TO ALERT YOU THAT THERE IS A POSSIBILITY OF DAMAGING THIS EQUIPMENT.

NOTE: Gives essential information that will aid you to better understand, incorporate, or execute a particular set of instructions.

Look for this symbol to point out im- portant safety precautions. It means CAUTION!!! BECOME ALERT!!! YOUR SAFETY IS INVOLVED.

CAUTION: Always disconnect spark plug wire and place wire where it can- not contact spark plug in order to pre- vent accidental starting when setting up, transporting, adjusting or making repairs.

WARNING

The engine exhaust from this product contains chemicals known to the State of California to cause cancer, birth defects, or other reproduc- tive harm.

Page 2
Image 2
Poulan 410237, 96092001000 manual Safety Rules, Training, Preparation, Operation, Maintenance and Storage

410237, 96092001000 specifications

The Poulan 96092001000,410237 is a premium chainsaw that has garnered attention from both amateur and professional users for its powerful performance and reliability. This model is designed for a variety of cutting tasks, making it suitable for everything from pruning trees to felling larger timber.

One of the standout features of the Poulan 96092001000 is its robust engine. The chainsaw is powered by a reliable two-stroke engine that delivers substantial horsepower, allowing for efficient cutting. Its engine is designed for reduced emissions, aligning with environmental standards while still providing the necessary power to handle tough jobs. Additionally, the starter mechanism is user-friendly, enabling users to start the saw effortlessly, even in cold conditions.

The chainsaw is equipped with a high-quality, durable chain that ensures smooth cutting through wood. Its bar length strikes a balance between maneuverability and cutting capacity. This makes the Poulan ideal for both detailed work in tight spaces and more extensive cutting tasks. The sharp chain is designed to self-lubricate, reducing wear and ensuring longevity, which is a vital aspect for those who intend to use the saw regularly.

Safety is paramount in chainsaw design, and the Poulan 96092001000 does not disappoint. It features a chain brake that activates when sudden pressure is applied, stopping the chain instantly to prevent accidents. The ergonomic handle design enhances user comfort and control, reducing fatigue during prolonged use. Additionally, the anti-vibration system significantly reduces handle vibrations, making it easier to control the saw over extended periods.

Another notable technology is the easy-access air filter and fuel system, which simplifies maintenance tasks. Users can quickly access these components for cleaning or replacement, contributing to the tool's longevity and performance consistency.

In summary, the Poulan 96092001000,410237 is a feature-rich chainsaw designed for both performance and user convenience. With its powerful engine, reliable cutting capabilities, superior safety features, and user-friendly maintenance options, this chainsaw is an excellent choice for anyone looking for a dependable cutting tool. Whether for professional forestry work or weekend gardening projects, the Poulan 96092001000 stands out as a top contender in its class, making it a worthwhile investment for both hobbyists and professionals alike.