MAINTENANCE

AUGER GEAR CASE

The gear case was filled with lubricant to the proper level at the factory. The only time the lubricant needs attention is if service has been performed on the gear case.

If lubricant is required, use only Ronex ED #1 grease.

TRACTION DRIVE SYSTEM

DO NOT lubricate the drive components inside the snow thrower. The sprockets, hex shafts, drive disc and friction wheel require no lubrication. The bearings and bushings are lifetime lubricated and require no maintenance.

CAUTION: Any lubricating of the above compo- nents can cause contamination of the friction wheel and damage to the drive system of your snow thrower.

ENGINE

See engine manual.

LUBRICATION

Use only high quality detergent oil rated with API service classification SG–SL. Select the oil's SAE viscosity grade according to your expected operating temperature.

NOTE: Although multi-viscosity oils (5W30, 10W30 etc.) improve starting in cold weather, these multi-viscosity oils will result in increased oil consumption when used above 32°F. Check your engine oil level more frequently to avoid possible engine damage from running low on oil.

Changetheoilafterevery25hoursofoperationoratleastonce a year if the snow thrower is not used for 25 hours in one year.

Check the crankcase oil level before starting the engine and after each five (5) hours of continuous use. Tighten oil fill cap / dipstick securely each time you check the oil level.

TO CHANGE ENGINE OIL

Determine temperature range anticipated before next oil change. All oil must meet API service classification SG–SL.

Be sure snow thrower is on level surface.

Oil will drain more freely when warm.

Catch oil in a suitable container.

NOTE: The left side wheel may be removed from snow thrower for easier access to the oil drain plug and place- ment of a suitable container. The unit tilted, resting on the frame with the left wheel removed, will help drain any oil trapped inside the engine. (See “TO REMOVE WHEELS” in the Service and Adjustments section of this manual).

1.Remove safety ignition key and disconnect spark plug wire from spark plug. Place wire where it cannot come in contact with plug.

2.Clean area around drain plug.

3.Remove drain plug and drain oil in a suitable container.

4.Install drain plug and tighten securely.

5.Wipe off any spilled oil from snow thrower and engine.

6.Install left wheel (if removed for draining oil). Be sure to install klick pin into proper hole in wheel axle (See “TO REMOVE WHEELS” in the Service and Adjustments section of this manual).

7.Remove oil fill cap/dipstick. Be careful not to allow dirt to enter the engine.

8.Refill engine with oil through oil dipstick tube. Pour slowly. Do not overfill. For approximate capacity see “PRODUCT SPECIFICATIONS” section of this manual.

9.Use gauge on oil fill cap/dipstick for checking level. Be sure dipstick cap is tightened securely for accurate reading. Keep oil at “FULL” line on dipstick.

10.Wipe off any spilled oil.

MUFFLER

Inspect and replace corroded muffler as it could create a fire hazard and/or damage.

SPARK PLUG

Replace spark plug at the beginning of each season or after every 100 hours of operation, whichever occurs first. Spark plug type and gap setting are shown in the “PRODUCT SPECIFICATIONS” section of this manual.

CLEANING

IMPORTANT: For best performance, keep snow thrower housing free of any dirt or trash. Clean the outside of your snow thrower after each use.

WARNING: Remove safety ignition key and disconnect spark plug wire from spark plug. Place wire where it cannot come in contact with plug.

Keep finished surfaces/wheels free of gasoline, oil, etc.

We do not recommend using a garden hose to clean your snow thrower unless the electrical system, muffler and carburetor are covered to keep water out. Water in engine can result in shortened engine life.

14

Page 14
Image 14
Poulan 414659 owner manual Engine, Cleaning

414659 specifications

The Poulan 414659 is a powerful and versatile chainsaw designed for homeowners and professionals alike. This reliable tool offers an impressive combination of features and technologies, making it a popular choice for various cutting tasks, from trimming branches to felling trees.

One of the standout features of the Poulan 414659 is its robust engine. With a high-performance 42cc motor, this chainsaw delivers ample power to tackle demanding projects while remaining lightweight and easy to maneuver. This balance of power and weight ensures that users can handle extended periods of cutting without experiencing excessive fatigue.

The chainsaw is equipped with a 16-inch bar and chain, providing a considerable cutting capacity. This length is ideal for handling medium-sized trees and larger branches. Furthermore, the Oregon chain is designed for smooth cutting performance, allowing for clean cuts and reducing the risk of kickback.

Ease of use is a key characteristic of the Poulan 414659. The chainsaw features an adjustable automatic oiling system that ensures the chain remains properly lubricated during operation. This feature not only prolongs the life of the chain but also contributes to efficient cutting. Additionally, the tool's easy-access air filter and spark plug make maintenance a breeze, allowing users to keep the chainsaw in peak condition with minimal effort.

Safety is another priority for Poulan. The chainsaw comes equipped with a chain brake, which quickly stops the chain in case of kickback. This feature, combined with a low-vibration design, enhances user safety and comfort, making it easier to control the saw during operation.

The Poulan 414659 also incorporates a soft-grip handle for improved comfort and better grip, ensuring users have a solid hold while cutting. The lightweight design, coupled with a well-balanced body, makes it easy to maneuver in various cutting positions.

In summary, the Poulan 414659 is a feature-rich chainsaw that combines power, ease of use, and safety. With its 42cc engine, 16-inch bar, automatic lubrication system, and safety features, this chainsaw is an excellent tool for anyone looking to tackle outdoor cutting tasks efficiently. Whether you're a seasoned professional or a first-time user, the Poulan 414659 offers the reliability and performance needed to get the job done effectively.