MAINTENANCE

GENERAL RECOMMENDATIONS

The warranty on this snow thrower does not cover items that have been subjected to operator abuse or negligence. To receive full value from the warranty, operator must maintain snow thrower as instructed in this manual. Some adjustments will need to be made periodically to properly maintain your snow thrower. All adjustments in the Service and Adjustments section of this manual should be checked at least once each season.

•Once a year, you should replace the spark plug and check belts for wear. A new spark plug will help your engine run better and last longer.

•Follow the maintenance schedule in this manual.

NOTE: Use only Original Equipment Manufacturer (OEM) parts to service this unit. Failure to do so can cause the unit to malfunction and pose a risk of injury to the operator.

BEFORE EACH USE

1.Check engine oil level.

2.Check for loose fasteners.

3.Check controls to be sure they are functioning properly.

LUBRICATION

Keep your snow thrower well lubricated (See “LUBRICATION CHART”).

LUBRICATION CHART

SAE 5W-30 Motor Oil

See “ENGINE” in Maintenance section

General

Purpose

Grease

Pivot points

Auger

 

grease fittings

Engine oil

SNOW THROWER

Always observe the safety rules when performing any maintenance.

TIRES

•Maintain proper air pressure in both tires (14–17 P.S.I. / 19-24.5 N-m).

•Keeptiresfreeofgasolineandoil,whichcanharmrubber.

NOTE: To seal tire punctures and prevent flat tires due to slow leaks, tire sealant may be purchased from your local parts dealer. Tire sealant also prevents tire dry rot and corrosion.

V-BELTS

Check V-belts for deterioration and wear after every 50 hours of operation and replace if necessary. The belts are not adjustable. Replace belts if they begin to slip from wear. (See “TO REMOVE BELT COVER” in the Service and Adjustments section of this manual).

The V-belts on your snow thrower are of special construction and should be replaced by original equipment manufacturer (OEM) belts available from your nearest dealer. Using other than OEM belts can cause personal injury or damage to

13 the snow thrower.

Page 12 Page 14
Page 13
Image 13
Poulan 415136 owner manual Maintenance
Page 12 Page 14

415136 specifications

The Poulan 415136 is a powerful and versatile chainsaw designed for both professional loggers and homeowners alike. Its robust design and advanced technology make it suitable for various cutting tasks, from felling trees to pruning and firewood preparation. With a focus on reliability and performance, the Poulan 415136 stands out in the competitive chainsaw market.

One of the key features of the Poulan 415136 is its powerful engine. Equipped with a high-performance gas engine, it offers impressive cutting speed and efficiency. The engine's reliability ensures that users can rely on it for extended periods without worrying about performance degradation. Its 40cc displacement provides a perfect balance between power and weight, making it easy to maneuver during operation.

The Poulan 415136 also features an automatic lubrication system that ensures the chain and bar remain well-lubricated during use. This technology not only extends the life of the chain and bar but also helps maintain consistent cutting performance. The adjustable oil flow allows users to customize the lubrication according to their specific cutting needs, making the chainsaw versatile for various tasks.

Another standout characteristic is its ergonomic design. The chainsaw is equipped with a comfortable handle that minimizes user fatigue, allowing for longer hours of usage without discomfort. The anti-vibration system further enhances the experience by reducing vibrations transmitted to the user, promoting smoother operation during cutting.

Safety is a crucial consideration for any chainsaw, and the Poulan 415136 does not disappoint. It features a chain brake that stops the chain almost immediately in case of kickback, protecting the user from potential accidents. Additionally, the chainsaw's safety latch prevents accidental starting, adding an extra layer of security during operation.

The Poulan 415136 is also designed for easy maintenance. Its tool-less chain tensioning system allows users to easily adjust the chain tension without the need for additional tools, saving time and effort during operation. This feature is particularly beneficial for users who require quick adjustments on the job site.

In summary, the Poulan 415136 is an outstanding chainsaw that combines power, efficiency, and user-friendly features. With its high-performance engine, automatic lubrication system, ergonomic design, and enhanced safety features, it is ideal for both professional users and homeowners looking to tackle their cutting tasks efficiently. Whether you are clearing fallen trees or maintaining your property, the Poulan 415136 is a reliable choice that delivers exceptional performance.
Top Page Image Contents