IMPORTANT

Safe Operation Practices for Walk-Behind Snow Throwers

This snow thrower is capable of amputating hands and feet and throwing objects. Failure to observe the following safety instructions could result in serious injury.

Look for this symbol to point out im- portant safety precautions. It means CAUTION!!! BECOME ALERT!!! YOUR SAFETY IS INVOLVED.

WARNING: Always remove safety igni- tion key and disconnect spark plug wire and place it where it cannot contact plug in order to prevent accidental starting when setting up, transporting, adjusting or making repairs.

WARNING: This snow thrower is for use on sidewalks, driveways and other ground level surfaces. Caution should be exercised while using on sloping sur- faces. Do not use snow thrower on surfaces above ground level such as roofs of residences, garages, porches or other such structures or buildings.

WARNING: Snow throwers have ex- posed rotating parts, which can cause severe injury from contact, or from ma- terial thrown from the discharge chute. Keep the area of operation clear of all persons, small children and pets at all times including startup.

CAUTION: Muffler and other engine parts become extremely hot during operation and remain hot after engine has stopped. To avoid severe burns on contact, stay away from these areas.

WARNING: Engine exhaust, some of its constituents, and certain vehicle components contain or emit chemi- cals known to the State of California to cause cancer and birth defects or other reproductive harm.

Training

1.Read, understand and follow all instructions on the machine and in the manual(s) before operating this unit. Be thoroughly familiar with the controls and the proper use of the equipment. Know how to stop the unit and disengage the controls quickly.

2.Never allow children to operate the equipment. Never allow adults to operate the equipment without proper instruction.

3.Keep the area of operation clear of all persons, par- ticularly small children.

4.Exercise caution to avoid slipping or falling, especially when operating the snow thrower in reverse.

Preparation

1.Thoroughly inspect the area where the equipment is to be used and remove all doormats, sleds, boards, wires, and other foreign objects.

2.Disengage all clutches and shift into neutral before starting the engine (motor).

3.Do not operate the equipment without wearing adequate winter garments. Avoid loose fitting clothing that can get caught in moving parts. Wear footwear that will improve footing on slippery surfaces.

4.Handle fuel with care; it is highly flammable

(a)Use an approved fuel container.

(b)Never add fuel to a running engine or hot en- gine.

(c)Fill fuel tank outdoors with extreme care. Never fill fuel tank indoors.

(d)Never fill containers inside a vehicle or on a truck or trailer bed with a plastic liner. Always place containers on the ground, away from your vehicle, before filling.

(e)When practical, remove gas-powered equipment from the truck or trailer and refuel it on the ground. If this is not possible, then refuel such equipment on a trailer with a portable container, rather than from a gasoline dispenser nozzle.

(f)Keep the nozzle in contact with the rim of the fuel tank or container opening at all times, until refuel- ing is complete. Do not use a nozzle lock-open device.

(g)Replace gasoline cap securely and wipe up spilled fuel.

(h)If fuel is spilled on clothing, change clothing im- mediately.

5.Use extension cords and receptacles as specified by the manufacturer for all units with electric drive motors or electric starting motors.

6.Adjust the collector housing height to clear gravel or crushed rock surface.

7.Never attempt to make any adjustments while the engine (motor) is running (except when specifically recommended by manufacturer).

8.Always wear safety glasses or eye shields during op- eration or while performing an adjustment or repair to protect eyes from foreign objects that may be thrown from the machine.

Operation

1.Do not put hands or feet near or under rotating parts. Keep clear of the discharge opening at all times.

2.Exercise extreme caution when operating on or cross- ing gravel drives, walks, or roads. Stay alert for hidden hazards or traffic.

3.After striking a foreign object, stop the engine (motor), remove the wire from the spark plug, disconnect the cord on electric motors, thoroughly inspect the snow thrower for any damage, and repair the damage before restarting and operating the snow thrower.

4.If the unit should start to vibrate abnormally, stop the engine (motor) and check immediately for the cause. Vibration is generally a warning of trouble.

5.Stop the engine (motor) whenever you leave the oper- ating position, before unclogging the collector/impeller housing or discharge chute, and when making any

2

repairs, adjustments or inspections.

 

Page 2
Image 2
Poulan 415244, 96192001801 owner manual Safe Operation Practices for Walk-Behind Snow Throwers

96192001801, 415244 specifications

The Poulan 96192001801,415244 is a noteworthy option in the realm of outdoor power equipment, specifically designed for lawn care enthusiasts and professionals alike. This product stands out for its robust features, innovative technologies, and user-friendly characteristics that enhance lawn maintenance experiences.

One of the main features of the Poulan 96192001801,415244 is its powerful engine. Equipped with a reliable two-cycle engine design, it delivers robust performance, ensuring that users can tackle various lawn care tasks with ease. The engine provides sufficient power for trimming, edging, and even light landscaping, making it a versatile tool for yard maintenance.

The lightweight design of this product significantly enhances user comfort and maneuverability. Weighing in at a manageable level, the trimmer allows for extended use without causing undue strain on the user. This aspect is particularly beneficial for homeowners who may need to spend several hours working on their lawns or for professionals who require efficiency and ease of use.

Additionally, the Poulan 96192001801,415244 features an adjustable cutting width, allowing users to customize the trimmer’s performance based on specific needs. This flexibility not only increases efficiency but also saves time, as users can switch between different tasks without the hassle of changing equipment.

An important characteristic of this model is its ease of starting mechanism. The inclusion of an easy-start system minimizes the effort needed to get the trimmer up and running, thus reducing frustration, especially on busy days when tackling multiple gardening tasks. This feature is particularly appreciated by novice users who may lack extensive experience with outdoor power equipment.

The Poulan 96192001801,415244 also incorporates a straightforward line feed system, which ensures that users can quickly and efficiently replace the cutting line when needed, minimizing downtime during yard work. This design consideration makes it an excellent choice for those who prioritize efficiency and convenience.

In summary, the Poulan 96192001801,415244 combines power, versatility, and user-friendly features, positioning it as a top-tier option for anyone looking to maintain their outdoor spaces effectively. Whether for residential use or professional landscaping, this trimmer provides the functionality and reliability needed for successful lawn care endeavors.