Tine Operation Check See Fig | Poulan 96082000900, 417134 specs

SERVICE AND ADJUSTMENTS

NARROW TILLING/CULTIVATING - 12-3/4" PATH (See Fig. 18)

•Remove outer tines.

tine_6

INNER TINES ONLY

FIG. 18

NOTE: When reassembling outer tines, be sure right tine assembly (marked “R”) and left tine assembly (marked “L”) are mounted to correct side of tine shaft.

TINE OPERATION CHECK (See Fig. 19)

WARNING: Disconnect spark plug wire from spark plug to prevent starting while checking tine operation.

For proper tine operation, forward tine control lever must be against control body and all slack removed from inner wire of control cable when control is in the “OFF” (up) position.

If lever and cable are loose, loosen cable clip at lower end of cable. Pull up on cable to remove slack, without extending spring on end of cable, and retighten cable clip.

FINAL CHECK “OFF” POSITION

•With tine control “OFF” (up), push down on handle to raise tines off the ground.

•Slowly pull recoil starter handle while observing tines. Tines should not rotate.

•If tines rotate, inner wire of control cable is too tight which is extending lower spring and engaging tines. Loosen cable clip and push down on cable only enough to relieve spring tension. Tighten cable clip.

•Recheck in “OFF” position and adjust if necessary.

FINAL CHECK “ON” POSITION

•With tine control “ON” (held down to handle) push down on handle to raise tines off the ground.

•Slowly pull recoil starter handle while observing tines. Tines should rotate forward.

•If tines do not rotate, inner wire of control cable is too loose. Loosen cable clip and pull cable up to remove slack and retighten clip.

•Recheck in “ON” position and adjust if necessary. NOTE: If “ON” position check required adjustment, recheck “OFF” position adjustment to insure tines do not rotate when control is “OFF” (up).

					FORWARD TINE
					CONTROL IN “OFF”
					(UP) POSITION
					TINE CONTROL
				BODY	“ON” POSITION
				BODY
		_	9	4
			9

	and	l
h	and
				CABLE	TINE
				CLIP	TINE
					CONTROL
					CABLE
				FIG. 19

TO REMOVE BELT GUARD (See Fig. 20)

•Remove two (2) cap nuts and washers from side of belt guard.

•Loosen (do not remove) tine shield nut on underside of tine shield.

•Pull belt guard out and away from unit.

•Replace belt guard by reversing above procedure. Be sure slot in bottom of belt guard is under head of tine shield bolt and all nuts are tightened securely.

CAP NUTS

AND WASHERS

BELT

GUARD

TINE

SHIELD

NUT

FIG. 20

TO REPLACE V-BELTS (See Figs. 21 and 22)

Replace V-belts if they have stretched considerably or if they show cracks or frayed edges. There are two (2) V-belts - forward (inside) and reverse (outside).

Belt guard must be removed to service belts. See “TO REMOVE BELT GUARD” in this section of manual.

NOTE: Observe carefully routing of both belts and location of all belt guides before removing belts.

417134, 96082000900 specifications

The Poulan 96082000900,417134 is an essential tool for outdoor maintenance enthusiasts and professionals alike, boasting a range of features designed to enhance efficiency and performance. This model represents the fusion of durability and innovative technology, tailored to meet the rigorous demands of lawn care and landscaping tasks.

One of the main features of the Poulan 96082000900 is its powerful engine. Equipped with a reliable, high-performance engine, it delivers the necessary power for heavy-duty applications. This engine provides robust torque, ensuring that you can tackle a variety of tasks with minimal effort. Whether cutting through thick grass or tackling dense undergrowth, this tool handles it with ease.

The design of the Poulan 96082000900 is also noteworthy. It incorporates a lightweight and ergonomic build, allowing users to operate it with comfort during extended use. The handle design promotes a natural grip, reducing fatigue and improving maneuverability. This design consideration is crucial for those who spend long hours maintaining their lawns or landscaping projects.

A standout characteristic of this model is its advanced cutting system. The Poulan 96082000900 features a sharp, durable cutting blade that ensures a clean and precise cut, promoting the health of your lawn. The adjustable cut height feature allows users to customize the length of their grass, which is essential for different lawn care needs. Furthermore, the easy-to-use mechanism for height adjustments makes switching between heights a quick and seamless process.

Technologically, the Poulan 96082000900 integrates features that enhance operational efficiency. The addition of a reliable starting system minimizes the hassle often associated with starting small engines. Coupled with an efficient air filtration system, this model ensures prolonged engine life and consistent performance over time. The low-vibration technology integrated into the design also decreases operator fatigue, providing a smoother experience during use.

In conclusion, the Poulan 96082000900,417134 is designed with the modern user in mind. It combines power, comfort, and advanced features to deliver a reliable outdoor maintenance solution. Whether you're a passionate gardener or a professional landscaper, this model stands out as a competent tool that enhances your ability to maintain and beautify outdoor spaces with ease and efficiency.

Poulan 96082000900, 417134 manual Tine Operation Check See Fig, To Remove Belt Guard See Fig

Models: 417134 96082000900