SAFETY RULES

Safe Operation Practices for Walk-Behind Powered Rotary Tillers

TRAINING

Read the Manual carefully. Be thoroughly familiar with the controls and the proper use of the equipment. Know how to stop the unit and disengage the controls quickly.

Never allow children to operate the equipment. Never allow adults to operate the equipment without proper instruction.

Keep the area of operation clear of all persons, par- ticularly small children, and pets.

Never operate the tiller without proper guards, plates, or other safety protective devices in place.

Keep children and pets away.

Do not overload the machine capacity by attempting to till too deep at too fast a rate.

Never operate the machine at high speeds on slippery surfaces. Look behind and use care when backing.

Never allow bystanders near the unit.

Use only attachments and accessories approved by the manufacturer of the tiller.

PREPARATION

Thoroughly inspect the area where the equipment is to be used and remove all foreign objects.

Disengage all clutches and shift into neutral before starting the engine (motor).

Never operate the tiller without good visibility or light.

Be careful when tilling in hard ground. The tines may catch in the ground and propel the tiller forward. If this occurs, let go of the handlebars and do not restrain the machine.

Do not operate the equipment without wearing ade- quate outer garments. Wear footwear that will improve footing on slippery surfaces.

Handle fuel with care; it is highly flammable.

Use an approved fuel container.

Never add fuel to a running engine or hot engine.

Fill fuel tank outdoors with extreme care. Never fill fuel tank indoors.

Replace gasoline cap securely and clean up spilled fuel before restarting.

Use extension cords and receptacles as specified by the manufacturer for all units with electric drive motors or electric starting motors.

Never attempt to make any adjustments while the engine (motor) is running (except where specifically recommended by manufacturer).

OPERATION

Do not put hands or feet near or under rotating parts.

Exercise extreme caution when operating on or cross- ing gravel drives, walks, or roads. Stay alert for hidden hazards or traffic. Do not carry passengers.

After striking a foreign object, stop the engine (motor), remove the wire from the spark plug, thoroughly inspect the tiller for any damage, and repair the damage before restarting and operating the tiller.

Exercise caution to avoid slipping or falling.

If the unit should start to vibrate abnormally, stop the engine (motor) and check immediately for the cause. Vibration is generally a warning of trouble.

Stop the engine (motor) when leaving the operating position.

Take all possible precautions when leaving the machine unattended. Disengage the tines, shift into neutral, and stop the engine.

Before cleaning, repairing, or inspecting, shut off the engine and make certain all moving parts have stopped. Disconnect the spark plug wire, and keep the wire away from the plug to prevent accidental starting. Disconnect the cord on electric motors.

Do not run the engine indoors; exhaust fumes are dangerous.

2

MAINTENANCE AND STORAGE

Keep machine, attachments, and accessories in safe working condition.

Check shear pins, engine mounting bolts, and other bolts at frequent intervals for proper tightness to be sure the equipment is in safe working condition.

Never store the machine with fuel in the fuel tank inside a building where ignition sources are present, such as hot water and space heaters, clothes dryers, and the like. Allow the engine to cool before storing in any enclosure.

Always refer to the operator’s guide instructions for important details if the tiller is to be stored for an ex- tended period.

- IMPORTANT -

CAUTIONS, IMPORTANTS, AND NOTES ARE A MEANS OF ATTRACTING ATTENTION TO IMPORTANT OR CRITICAL INFORMATION IN THIS MANUAL.

IMPORTANT: USED TO ALERT YOU THAT THERE IS A POSSIBILITY OF DAMAGING THIS EQUIPMENT.

NOTE: Gives essential information that will aid you to better understand, incorporate, or execute a particular set of instructions.

Look for this symbol to point out im- portant safety precautions. It means CAUTION!!! BECOME ALERT!!! YOUR SAFETY IS INVOLVED.

CAUTION: Always disconnect spark plug wire and place wire where it can- not contact spark plug in order to pre- vent accidental starting when setting up, transporting, adjusting or making repairs.

WARNING

The engine exhaust from this product contains chemicals known to the State of California to cause cancer, birth defects, or other reproduc- tive harm.

Page 2
Image 2
Poulan 417150, 96092001300 manual Safety Rules, Training, Preparation, Operation, Maintenance and Storage

96092001300, 417150 specifications

The Poulan 96092001300,417150 is a powerful and reliable chainsaw designed for both professional users and home enthusiasts who require a robust tool for cutting wood, pruning trees, and handling various outdoor tasks. This model stands out for its impressive combination of features and technologies that streamline cutting tasks while ensuring user safety and comfort.

One of the key features of the Poulan 96092001300,417150 is its efficient engine. Powered by a 50cc 2-cycle engine, this chainsaw delivers significant horsepower and torque, allowing users to tackle both small and large jobs with ease. The engine's design emphasizes fuel efficiency, promising longer run times between refueling, which is essential for extended projects.

This model also incorporates a 20-inch cutting bar, providing an optimal balance between cutting capacity and maneuverability. The length is suitable for a variety of applications, allowing users to cut through large logs or perform detailed cuts on smaller branches. The chainsaw’s low-vibration technology enhances user comfort, reducing fatigue during operation and enabling greater precision and control.

Safety is a top priority with the Poulan 96092001300,417150. It features a chain brake that can be activated in the event of kickback, offering an additional layer of protection. The front handguard also provides safeguards against debris during cutting operations, ensuring a safer working environment.

Another notable characteristic of this chainsaw is its easy-start system, which reduces the effort needed to start the engine. The air filter is also readily accessible, which simplifies maintenance and ensures that the chainsaw operates at peak performance.

The Poulan 96092001300,417150 is designed with ergonomic handles that ensure a secure grip, providing increased maneuverability and comfort during prolonged use. The saw's lightweight construction balances power and portability, making it easier to handle for extended periods.

In summary, the Poulan 96092001300,417150 brings together power, safety, and user-friendly features. Its solid build and reliable performance make it a versatile tool for anyone needing a reliable chainsaw for their outdoor projects. Whether you are trimming branches, cutting firewood, or tackling larger limbs, this chainsaw proves to be an excellent choice for both experienced users and beginners alike.