OPERATION

COLD START - ELECTRIC STARTER

1.Insert safety ignition key (packed separately in parts bag) into ignition slot until it clicks. DO NOT turn the key. Keep the extra safety ignition key in a safe place.

2.Place throttle control in “FAST” position.

3.Rotate choke control to “FULL” position.

4.Connect the power cord to the engine.

5.Plug the other end of the power cord into a three-hole grounded 120 Volt A.C. receptacle.

6.Push the primer three (3) times.

7.Push starter button until engine starts.

IMPORTANT: Do not crank engine more than five continu- ous seconds between each time you try to start. Wait 5 to 10 seconds between each attempt.

8.When the engine starts, release the starter button and slowly move the choke control to the “OFF” position.

9.Disconnect the power cord from the receptacle first, then from the engine.

Allow the engine to warm up for a few minutes. Engine will not develop full power until it has reached normal operat- ing temperature.

WARM START - ELECTRIC STARTER

Follow the steps above, keeping the choke control in the “OFF” position.

COLD START - RECOIL STARTER

1.Insert safety ignition key (packed separately in parts bag) into ignition slot until it clicks. DO NOT turn the key. Keep the extra safety ignition key in a safe place.

2.Place throttle control in “FAST” position.

3.Rotate choke control to “FULL” position.

4.Push the primer four (4) times if the temperature is below 15°F, or two (2) times if temperature is between 15° and 50°F. If temperature is above 50°F, priming is not necessary.

NOTE: Over priming may cause flooding, preventing the engine from starting. If you do flood the engine, wait a few minutes before attempting to start and DO NOT push the primer.

5.Pull recoil starter handle quickly. Do not allow starter rope to snap back.

6.When the engine starts, release the recoil starter handle and slowly move the choke control to the “OFF” posi- tion.

Allow the engine to warm up for a few minutes. Engine will not develop full power until it has reached normal operat- ing temperature.

WARM START - RECOIL STARTER

Follow the steps above, keeping the choke in the “OFF” position. DO NOT push the primer.

BEFORE STOPPING

Run the engine for a few minutes to help dry off any mois- ture on the engine.

IF RECOIL STARTER HAS FROZEN

If the recoil starter has frozen and will not turn the engine, proceed as follows:

1.Grasp the recoil starter handle and slowly pull as much rope out of the starter as possible.

2.Release the recoil starter handle and let it snap back against the starter.

If the engine still fails to start, repeat the above steps or use the electric starter.

SNOW THROWING TIPS

•Always operate the snow thrower with the engine at full throttle. Full throttle offers the best performance.

•Go slower in deep, freezing or heavy wet snow. Use the drive speed control, NOT the throttle, to adjust speed.

•It is easier and more efficient to remove snow imme- diately after it falls.

•The best time to remove snow is the early morning. At this time the snow is usually dry and has not been ex- posed to the direct sun and warming temperatures.

•Slightly overlap each successive path to ensure all snow will be removed.

•Throw snow downwind whenever possible.

•Adjust the skid plates to proper height for current snow conditions. See “TO ADJUST SKID PLATES” in this section of this manual.

•For extremely heavy snow, reduce the width of snow removal by overlapping previous path and moving slowly.

•Keep engine clean and clear of snow during use. This will help air flow and extend engine life.

•After snow-throwing is completed, allow engine to run for a few minutes to melt snow and ice off the engine.

•Clean the entire snow thrower thoroughly after each use and wipe dry so it is ready for next use.

WARNING: Do not operate snow thrower if weather conditions impair visibility. Throwing snow during a heavy, windy snowstorm can blind you and be hazardous to the safe operation of the snow thrower.

12

Page 11 Page 13
Page 12
Image 12
Poulan 421028 owner manual Snow Throwing Tips, Before Stopping, If Recoil Starter has Frozen
Page 11 Page 13

421028 specifications

The Poulan 421028 is a notable chainsaw that has gained attention among both casual users and professionals due to its blend of power, efficiency, and user-friendly design. This model is especially suited for light to medium-duty tasks, making it an ideal choice for homeowners and those looking to tackle yard work or firewood preparation.

One of the standout features of the Poulan 421028 is its powerful engine. It typically comes with a 42cc two-stroke engine that delivers a robust performance, allowing users to cut through various types of wood with ease. The power output ensures that even demanding tasks can be completed efficiently, making it suitable for felling small trees, trimming branches, and cutting logs.

In addition to power, the Poulan 421028 is designed with user comfort in mind. It features an ergonomic design that reduces operator fatigue, allowing for extended use without discomfort. The lightweight construction of the chainsaw contributes to its ease of maneuverability, making it accessible for users of different skill levels.

The chainsaw is equipped with an adjustable automatic oiling system that ensures optimal lubrication of the bar and chain during operation. This technology not only enhances the lifespan of the components but also ensures that the chainsaw runs smoothly, reducing the risk of overheating and wear.

Safety is another critical aspect of the Poulan 421028. It includes reliable safety features such as a chain brake, which immediately stops the chain's rotation in the event of kickback, protecting the user from potential injuries. Additionally, the front guard serves to shield hands from debris and other hazards, ensuring a safer cutting environment.

Ease of maintenance is a key consideration for any user, and the Poulan 421028 shines in this aspect as well. It comes with a tool-less access feature for the air filter and spark plug, simplifying routine maintenance tasks. This convenience helps users keep the chainsaw in peak operating condition with minimal effort.

In conclusion, the Poulan 421028 is a versatile and reliable chainsaw that combines power, comfort, and safety features, making it an excellent choice for various cutting tasks. Its user-friendly design, impressive engine performance, and ease of maintenance make it a valuable tool for both novice and experienced users alike. Whether you're tackling yard work or preparing firewood, the Poulan 421028 provides the efficiency and reliability needed to get the job done effectively.
Top Page Image Contents