SERVICE AND ADJUSTMENTS

TO REPLACE BELTS (See Fig. 23)

The auger and traction drive belts are not adjustable. If the belts are damaged or begin to slip from wear, they should be replaced. It is recommended that the belt(s) be replaced by a qualified service center.

NOTE: It is recommended that both the auger and traction drive belt be replaced at the same time.

The V-belts on your snow thrower are of special construction and should be replaced by original equipment manufacturer (OEM) belts available from your nearest dealer. Using other than OEM belts can cause personal injury or damage to the snow thrower.

WARNING: Belt replacement requires separation of the snow thrower. While separating the auger housing from the frame assembly, it is important that an assistant stand in the operating position and hold the snow thrower handles. Serious personal injury and/or damage to the unit could occur if the snow thrower should fall during the belt changing process.

FRAME

AUGER

ASSEMBLY

HOUSING

HANDLES

1.REMOVE GASOLINE FROM FUEL TANK - Drain gasoline from fuel tank into a suitable container, out- doors, away from fire or flame. Wipe up any spilled gasoline.

2.REMOVE DISCHARGE CHUTE - Loosen locknut securing chute rotator head to mounting bracket only enough to allow chute rotator head to be raised and discharge chute to be removed from snow thrower.

3.REMOVE BELT COVER - See “TO REMOVE BELT COVER” in this section of this manual.

4.REMOVE ENGINE PULLEY - Remove bolt, lockwasher and flat washer securing pulley to engine crankshaft. Remove outside (auger) pulley only from crankshaft.

5.SEPARATE SNOW THROWER - With your assistant standing in the operating position holding the handles, remove the two (2) bolts holding auger housing and frame together.

WARNING: As the last bolt is removed, have your assistant carefully lower the handles down to the ground.

6.REMOVE AUGER BELT from around pulley.

7.RELIEVE TENSION ON TRACTION DRIVE BELT IDLER and remove traction drive belt from around pulleys.

HINT: Insert a 3/8" drive ratchet (in the “ON” position) into the square hole in idler arm and rotate ratchet clockwise to relieve tension.

8.With tension relieved on idler, install new traction drive belt around pulleys and inside belt keepers.

9.Place auger belt around and inside the groove of auger pulley only.

10.While your assistant slowly raises handles to rejoin the auger housing and frame assembly, pull up on the auger belt and squeeze sides together above pulley so belt is fully seated in groove of pulley.

11.Move idler arm so it does not hit impeller pulley as you bring snow thrower completely together and check carefully for proper routing of belts. If auger belt has become dislodged from the pulley (by catching the idler arm bracket while bringing snow thrower together), separate the snow thrower and repeat step 12. Belt must be fully seated in pulley groove when bringing the snow thrower together.

12.Install the two (2) hex bolts and tighten securely.

13.INSTALL ENGINE PULLEY - Place belt in pulley groove and slide pulley on crankshaft. Install flat washer, lockwasher and bolt and tighten securely (30-35 ft. lbs. torque). Make sure belt is inside belt keeper.

14.INSTALL BELT COVER and two (2) screws. Tighten securely.

15.INSTALL DISCHARGE CHUTE – See “INSTALL DIS- CHARGE CHUTE / CHUTE ROTATER HEAD” in the Assembly / Pre-Operation section of this manual.

 

BELT KEEPER

 

 

TRACTION DRIVE BELT

 

ENGINE

FLAT WASHER

 

PULLEY

 

 

 

 

LOCKWASHER

 

 

BOLT

IDLER ARM

AUGER

SQUARE

BELT

HOLE

 

 

CLUTCHING

 

 

IDLER ARM

 

 

BRACKET

 

FRAME

AUGER PULLEY

AUGER

HOUSING

 

 

 

BOLTS

FIG. 23

17

Page 17
Image 17
Poulan 961940007, 421102 owner manual To Replace Belts See Fig

961940007, 421102 specifications

The Poulan 421102/961940007 is a robust and versatile chainsaw, ideal for both professional and amateur users alike. Designed to handle various cutting needs, from pruning and trimming to felling small trees, this chainsaw is known for its combination of power, ease of use, and durability.

One of the standout features of the Poulan 421102 is its high-performance engine. It typically boasts a 42cc engine that offers ample power to tackle tough cutting tasks. This engine is designed for efficiency, ensuring that users can work for extended periods without excessive fuel consumption. Moreover, the engine's design supports quick starts and smooth operation, making it a reliable choice for users of all experience levels.

The chainsaw features a lightweight and ergonomic design, providing comfort during prolonged use. Its balanced weight distribution allows for easier handling, reducing strain on the user’s arms and wrists. Coupled with an adjustable handle, this chainsaw offers excellent maneuverability, making it ideal for reaching high branches or navigating around obstacles.

Another important aspect of the Poulan 421102 is its safety features. The chainsaw often comes equipped with a chain brake that helps prevent accidents during use. The quick-stop chain brake ensures that the chain can be halted instantly in emergency situations. Additionally, the chainsaw may feature a throttle lockout, preventing accidental engagement of the throttle when not in use.

The Poulan 421102 chain system is designed for efficiency. It utilizes a 16-inch guide bar, which is optimal for residential tasks and light commercial work. The chain tensioning system allows for quick adjustments, ensuring that the chain operates smoothly, which reduces wear and extends the life of the chainsaw.

For ease of maintenance, the Poulan 421102 includes a tool-less air filter for simple cleaning and replacement. Keeping the engine clean is crucial for maintaining optimal performance and longevity. The low-vibration technology integrated into the design also contributes to user comfort and reduces fatigue, making it a great choice for longer jobs.

In summary, the Poulan 421102/961940007 chainsaw is a well-rounded tool that combines power, safety, and user-friendly features. Whether you're pruning your garden or tackling more demanding jobs, this chainsaw offers the performance needed to get the job done efficiently. Its thoughtful design and technological advancements make it a worthy investment for anyone in need of a reliable cutting tool.