STORAGE

Immediately prepare your tractor for storage at the end of the season or if the tractor will not be used for 30 days or more.

WARNING: Never store the tractor with gasoline in the tank inside a building where fumes may reach an open flame or spark. Allow the engine to cool before storing in any enclosure.

TRACTOR

Remove mower from tractor for winter storage. When mower is to be stored for a period of time, clean it thoroughly, remove all dirt, grease, leaves, etc. Store in a clean, dry area.

Clean entire tractor (See “CLEANING” in the Mainte- nance section of this manual).

Inspect and replace belts, if necessary (See belt re- placement instructions in the Service and Adjustments section of this manual).

Lubricate as shown in the Maintenance section of this manual.

Be sure that all nuts, bolts and screws are securely fastened. Inspect moving parts for damage, breakage and wear. Replace if necessary.

Touch up all rusted or chipped paint surfaces; sand lightly before painting.

BATTERY

Fully charge the battery for storage.

After a period of time in storage, battery may require recharging.

To help prevent corrosion and power leakage during long periods of storage, battery cables should be dis- connected and battery cleaned thoroughly (see “TO CLEAN BATTERY AND TERMINALS” in the Mainte- nance section of this manual).

After cleaning, leave cables disconnected and place cables where they cannot come in contact with battery terminals.

If battery is removed from tractor for storage, do not store battery directly on concrete or damp surfaces.

ENGINE

FUEL SYSTEM

IMPORTANT: IT IS IMPORTANT TO PREVENT GUM DEPOSITS FROM FORMING IN ESSENTIAL FUEL SYSTEM PARTS SUCH AS CARBURETOR, FUEL FILTER, FUEL HOSE, OR TANK DURING STORAGE. ALSO, EXPERIENCE INDICATES THAT ALCOHOL BLENDED FUELS (CALLED GASOHOL OR USING ETHANOL OR METHANOL) CAN ATTRACT MOISTURE WHICH LEADS TO SEPARATION AND FORMATION OF ACIDS DURING STORAGE. ACIDIC GAS CAN DAMAGE THE FUEL SYSTEM OF AN ENGINE WHILE IN STORAGE.

Empty the fuel tank by starting the engine and let it run until the fuel lines and carburetor are empty.

Never use engine or carburetor cleaner products in the fuel tank or permanent damage may occur.

Use fresh fuel next season.

NOTE: Fuel stabilizer is an acceptable alternative in mini- mizing the formation of fuel gum deposits during storage. Add stabilizer to gasoline in fuel tank or storage container. Always follow the mix ratio found on stabilizer container. Run engine at least 10 minutes after adding stabilizer to allow the stabilizer to reach the carburetor. Do not empty the gas tank and carburetor if using fuel stabilizer.

ENGINE OIL

Drain oil (with engine warm) and replace with clean en- gine oil. (See “ENGINE” in the Maintenance section of this manual).

CYLINDER(S)

Remove spark plug(s).

Pour one ounce of oil through spark plug hole(s) into cylinder(s).

Turn ignition key to “START” position for a few seconds to distribute oil.

Replace with new spark plug(s).

OTHER

Do not store gasoline from one season to another.

Replace your gasoline can if your can starts to rust. Rust and/or dirt in your gasoline will cause problems.

If possible, store your tractor indoors and cover it to give protection from dust and dirt.

Cover your tractor with a suitable protective cover that does not retain moisture. Do not use plastic. Plastic cannot breathe which allows condensation to form and will cause your tractor to rust.

IMPORTANT: NEVER COVER TRACTOR WHILE ENGINE AND EXHAUST AREAS ARE STILL WARM.

20

Page 20
Image 20
Poulan 424634 manual Storage, Other, Fuel System, Engine OIL, Cylinders

424634 specifications

The Poulan 424634 is an impressive lawn care tool designed for both amateur gardeners and professional landscapers. This particular model is a gas-powered string trimmer that offers a combination of power, versatility, and ease of use, making it a must-have for maintaining lawns, gardens, and outdoor spaces.

One of the standout features of the Poulan 424634 is its robust 2-cycle engine. This engine delivers a significant amount of power, ensuring that the trimmer can handle even the toughest jobs. The engine provides reliable performance, making it perfect for cutting through thick grass, weeds, and brush. Additionally, the model is designed for easy starting, minimizing frustration and downtime, which is a crucial factor for professionals who need to work efficiently.

The Poulan 424634 incorporates a unique Easy Start system. This technology allows users to start the trimmer with minimal effort, thanks to its specially designed priming system. This feature is particularly beneficial for those who may not be familiar with gas-powered equipment, as it reduces the learning curve associated with starting and operating a trimmer.

Equipped with a dual line head, the Poulan 424634 provides optimal cutting performance. The dual line feature means that users can create a wider trimming path, significantly improving productivity. This design not only enhances efficiency but also reduces the number of passes needed to achieve a clean cut on edges and around flower beds.

The trimmer is also built with user comfort in mind. The ergonomic handle reduces user fatigue, allowing for extended periods of use without discomfort. The adjustable length feature ensures that users of various heights can find a comfortable grip, promoting better control while trimming.

Furthermore, the Poulan 424634 is designed for durability and longevity. Its high-quality materials are resistant to wear and tear, ensuring that the trimmer can withstand rigorous use over time. This durability makes it a cost-effective choice for those looking to invest in reliable outdoor maintenance equipment.

In summary, the Poulan 424634 stands out due to its powerful 2-cycle engine, Easy Start technology, dual line head, ergonomic design, and durability. Whether you are a homeowner or a professional landscaper, this trimmer provides the performance and convenience needed to keep outdoor spaces in pristine condition.