SERVICE AND ADJUSTMENTS

TRANSAXLE GEAR SHIFT LEVER NEUTRAL ADJUSTMENT (See Fig. 22)

The transaxle should be in neutral when the gear shift lever is in neutral (lock gate) position. The adjustment is preset at the factory; however, if adjustment is needed, proceed as follows:

•Make sure transaxle is in neutral.

NOTE: When the tractor rear wheels move freely, the transaxle is in neutral.

•Loosen adjustment bolt in front of the right rear wheel.

•Position the gear shift lever in the neutral position.

•Tighten adjustment bolt securely.

NOTE: If additional clearance is needed to get to adjustment bolt, move mower deck height to the lowest position.

 

NEUTRAL

GEARSHIFT LEVER

LOCK GATE

 

 

ADJUSTMENT

 

BOLT

Fig. 22

TO ADJUST STEERING WHEEL ALIGNMENT

If steering wheel crossbars are not horizontal (left to right) when wheels are positioned straight forward, remove steer- ing wheel and reassemble per instructions in the Assembly section of this manual.

FRONT WHEEL TOE-IN/CAMBER

Your new tractor front wheel toe-in and camber is set at the factory and is normal. The front wheel toe-in and camber are not adjustable. If damage has occurred to affect the factory set front wheel toe-in or camber, contact a qualified service center.

TO REMOVE WHEEL FOR REPAIRS (See Fig. 23)

RETAINING WASHERS

RING

AXLE

COVER

SQUARE KEY (REAR

WHEEL ONLY)

Fig. 23

TO START ENGINE WITH A WEAK BATTERY (See Fig. 24)

WARNING: Lead-acid batteries gen- erate explosive gases. Keep sparks, flame and smoking materials away from batteries. Always wear eye protection when around batteries.

If your battery is too weak to start the engine, it should be recharged. (See "BATTERY" in the Maintenance section of this manual).

If “jumper cables” are used for emergency starting, follow this procedure:

IMPORTANT: YOUR TRACTOR IS EQUIPPED WITH A 12 VOLT SYSTEM. THE OTHER VEHICLE MUST ALSO BE A 12 VOLT SYSTEM. DO NOT USE YOUR TRACTOR BATTERY TO START OTHER VEHICLES.

TO ATTACH JUMPER CABLES -

•Connect one end of the RED cable to the POSITIVE

(+)terminal of each battery(A-B), taking care not to short against tractor chassis.

•Connect one end of the BLACK cable to the NEGATIVE (-) terminal (C) of fully charged battery.

•Connect the other end of the BLACK cable (D) to good chassis ground, away from fuel tank and battery.

TO REMOVE CABLES, REVERSE ORDER -

•BLACK cable first from chassis and then from the fully charged battery.

•RED cable last from both batteries.

•Block up axle securely.

•Remove axle cover, retaining ring and washers to allow wheel removal (rear wheel contains a square key - Do not lose).

•Repair tire and reassemble.

•On rear wheels only: align grooves in rear wheel hub and axle. Insert square key.

•Replace washers and snap retaining ring securely in axle groove.

•Replace axle cover.

NOTE: To seal tire punctures and prevent flat tires due to slow leaks, tire sealant may be purchased from your local

WEAK OR DEAD BATTERY

FULLY CHARGED

BATTERY

parts dealer. Tire sealant also prevents tire dry rot and corrosion.

Fig. 24

21

Page 20 Page 22
Page 21
Image 21
Poulan 9601210000, 430673 manual Transaxle Gear Shift Lever Neutral Adjustment See Fig, To Adjust Steering Wheel Alignment
Page 20 Page 22

9601210000, 430673 specifications

The Poulan 430673, also known by its part number 9601210000, is a noteworthy product in the outdoor power equipment market, specifically designed for lawn care enthusiasts and landscaping professionals alike. Known for its durability and efficient performance, this model has gained a reputation for reliability over the years.

One of the main features of the Poulan 430673 is its powerful engine, which boasts a robust output ideal for tackling tougher lawn maintenance tasks. With adequate horsepower, users can confidently manage a variety of yard sizes and grass types without experiencing a drop in performance. The unit is designed to provide consistent power, ensuring efficient operation during extended use.

Furthermore, the Poulan 430673 incorporates advanced technology that enhances user experience and overall performance. The engine features a patented starting mechanism, often characterized by an easy-start function, allowing users to quickly start the machine without the frustration that comes with traditional recoil starters. This feature especially appeals to those who may not have extensive experience with outdoor power tools.

The ergonomic design of the Poulan 430673 reflects an understanding of user comfort and ease of handling. It is equipped with a comfortable grip and lightweight structure, minimizing strain during operation. This practicality makes it easier for users to navigate around complex garden layouts or longer work sessions without physical fatigue.

In terms of safety, the Poulan 430673 also comes equipped with several features aimed at protecting the user. A safety switch prevents accidental startups, providing peace of mind when transporting or storing the unit. The design actively promotes safe operation, encouraging users to adhere to necessary precautions while maintaining their yards.

Additionally, this model stands out due to its compatibility with various attachments and accessories. This versatility allows users to customize their experience based on specific yard needs, whether it's clearing debris, edging, or mulching. The adaptability of the Poulan 430673 makes it not just a single-purpose tool, but a multifaceted piece of equipment that can grow with the user’s gardening or landscaping projects.

In conclusion, the Poulan 430673, with its powerful engine, user-friendly features, ergonomic design, safety measures, and compatibility with various attachments, serves as an excellent choice for individuals seeking reliable outdoor power equipment. It embodies a perfect blend of technology and practicality, making it a favored option among both casual gardeners and serious landscapers.
Top Page Image Contents