STORAGE

Immediately prepare your snow thrower for storage at the end of the season or if the unit will not be used for 30 days or more.

WARNING: Never store the snow thrower with gasoline in the tank inside a building where fumes may reach an open flame, spark or pilot light as on a furnace, water heater, clothes dryer or gas appliance. Allow the engine to cool before storing in any enclosure.

SNOW THROWER

When snow thrower is to be stored for a period of time, clean it thoroughly, remove all dirt, grease, leaves, etc. Store in a clean, dry area.

1.Clean entire snow thrower (See “CLEANING” in the Maintenance section of this manual).

2.Inspect and replace belts, if necessary (See “TO RE- PLACE BELTS” in the Service and Adjustments section of this manual).

3.Lubricate as shown in the Maintenance section of this manual.

4.Be sure that all nuts, bolts, screws, and pins are securely fastened. Inspect moving parts for damage, breakage and wear. Replace if necessary.

5.Touch up all rusted or chipped paint surfaces; sand lightly before painting.

ENGINE

See engine manual.

FUEL SYSTEM

IMPORTANT: It is important to prevent gum deposits from forming in essential fuel system parts such as carburetor, fuel hose, or tank during storage. Also, alcohol blended fuels (called gasohol or using ethanol or methanol) can attract moisture which leads to separation and formation of acids during storage. Acidic gas can damage the fuel system of an engine while in storage.

•Empty the fuel tank by starting the engine and letting it run until the fuel lines and carburetor are empty.

•Never use engine or carburetor cleaner products in the fuel tank or permanent damage may occur.

•Use fresh fuel next season.

NOTE: Fuel stabilizer is an acceptable alternative in min- imizing the formation of fuel gum deposits during storage. Add stabilizer to gasoline in fuel tank or storage container. Always follow the mix ratio found on stabilizer container. Run engine at least 10 minutes after adding stabilizer to allow the stabilizer to reach the carburetor. Do not empty the gas tank and carburetor if using fuel stabilizer.

ENGINE OIL

Drain oil (with engine warm) and replace with clean engine oil. (See “ENGINE” in the Maintenance section of this manual).

CYLINDER

1.Remove spark plug.

2.Pour one ounce (29 ml) of oil through spark plug hole into cylinder.

3.Pull recoil starter handle slowly a few times to distribute oil.

4.Replace with new spark plug.

OTHER

•Remove safety ignition key; store it in a safe place.

•Do not store gasoline from one season to another.

•Replace your gasoline can if your can starts to rust. Rust and/or dirt in your gasoline will cause problems.

•If possible, store your snow thrower indoors and cover it to protect it from dust and dirt.

•Cover your snow thrower with a suitable protective cover that does not retain moisture. Do not use plastic. Plastic cannot breathe, which allows condensation to form and will cause your snow thrower to rust.

IMPORTANT: Never cover snow thrower while engine/ex- haust area is still warm.

19

Page 18 Page 20
Page 19
Image 19
Poulan 96198003600, 435564, PP291E27 owner manual Storage, Other, Fuel System, Engine OIL, Cylinder
Page 18 Page 20

PP291E27, 96198003600, 435564 specifications

The Poulan PP291E27 is a powerful and efficient string trimmer designed for both residential and light commercial use. With its robust engine and user-friendly features, it delivers exceptional performance for various trimming and edging tasks, making it a popular choice for homeowners and landscapers alike.

One of the standout features of the PP291E27 is its 29cc 2-cycle engine, which provides the power needed to tackle thick grass and weeds. This engine is designed for efficiency, ensuring that you can complete jobs quickly without sacrificing performance. The trimmer is also equipped with an Easy Start system, which simplifies the starting process, allowing users to get to work with minimal effort.

The PP291E27 also boasts a versatile cutting width of 17 inches, making it suitable for trimming in tight spaces as well as larger areas. The dual-line feed head allows for easy line replacement and ensures an even cut, while the bump feed mechanism makes it easy to extend the cutting line as you work, promoting efficiency.

Weight is another important factor for string trimmers, and the PP291E27 is designed to be lightweight, which enhances maneuverability during use. The ergonomic handle provides comfort and reduces fatigue, allowing you to work for longer periods without strain. Additionally, the trimmer features an adjustable handle, making it customizable for users of different heights.

For durability, the PP291E27 features a solid construction that can withstand the rigors of outdoor use. The high-quality materials used in its design ensure that it can endure tough conditions, making it a reliable tool in any landscaping arsenal.

In terms of technology, Poulan has incorporated advanced features to minimize emissions, aligning with environmental standards while promoting cleaner operation. This eco-friendly approach is increasingly important for modern gardeners and landscapers who are conscious about their environmental footprint.

Overall, the Poulan PP291E27 is a versatile, powerful, and user-friendly string trimmer that combines efficiency with ergonomic design. Whether you're maintaining a home lawn or managing landscape projects, this trimmer stands out as a dependable choice for achieving a well-groomed landscape. With its balance of power, lightweight design, and ease of use, the PP291E27 continues to be a preferred option in the competitive market of outdoor power equipment.
Top Page Image Contents