IMPORTANT

Safe Operation Practices for Walk-Behind Snow Throwers

This snow thrower is capable of amputating hands and feet and throwing objects. Failure to observe the following safety instructions could result in serious injury.

Look for this symbol to point out im- portant safety precautions. It means CAUTION!!! BECOME ALERT!!! YOUR SAFETY IS INVOLVED.

WARNING: Always disconnect spark plug wire and place it where it cannot contact plug in order to prevent acci- dental starting when setting up, trans- porting, adjusting or making repairs.

WARNING: This snow thrower is for use on sidewalks, driveways and other ground level surfaces. Caution should be exercised while using on sloping sur- faces. Do not use snow thrower on surfaces above ground level such as roofs of residences, garages, porches or other such structures or buildings.

WARNING: Snow throwers have ex- posed rotating parts, which can cause severe injury from contact, or from ma- terial thrown from the discharge chute. Keep the area of operation clear of all persons, small children and pets at all times including startup.

CAUTION: Muffler and other engine parts become extremely hot during operation and remain hot after engine has stopped. To avoid severe burns on contact, stay away from these areas.

WARNING: Engine exhaust, some of its constituents, and certain vehicle components contain or emit chemi- cals known to the State of California to cause cancer and birth defects or other reproductive harm.

Training

1.Read, understand and follow all instructions on the machine and in the manual(s) before operating this unit. Be thoroughly familiar with the controls and the proper use of the equipment. Know how to stop the unit and disengage the controls quickly.

2.Never allow children to operate the equipment. Never allow adults to operate the equipment without proper instruction.

3.Keep the area of operation clear of all persons, par- ticularly small children.

4.Exercise caution to avoid slipping or falling, especially when operating the snow thrower in reverse.

Preparation

1.Thoroughly inspect the area where the equipment is to be used and remove all doormats, sleds, boards, wires, and other foreign objects.

2.Disengage all clutches and shift into neutral before starting the engine (motor).

3.Do not operate the equipment without wearing adequate winter garments. Avoid loose fitting clothing that can get caught in moving parts. Wear footwear that will improve footing on slippery surfaces.

4.Handle fuel with care; it is highly flammable

(a)Use an approved fuel container.

(b)Never add fuel to a running engine or hot en- gine.

(c)Fill fuel tank outdoors with extreme care. Never fill fuel tank indoors.

(d)Never fill containers inside a vehicle or on a truck or trailer bed with a plastic liner. Always place containers on the ground, away from your vehicle, before filling.

(e)When practical, remove gas-powered equipment from the truck or trailer and refuel it on the ground. If this is not possible, then refuel such equipment on a trailer with a portable container, rather than from a gasoline dispenser nozzle.

(f)Keep the nozzle in contact with the rim of the fuel tank or container opening at all times, until refuel- ing is complete. Do not use a nozzle lock-open device.

(g)Replace gasoline cap securely and wipe up spilled fuel.

(h)If fuel is spilled on clothing, change clothing im- mediately.

5.Use extension cords and receptacles as specified by the manufacturer for all units with electric drive motors or electric starting motors.

6.Adjust the collector housing height to clear gravel or crushed rock surface.

7.Never attempt to make any adjustments while the engine (motor) is running (except when specifically recommended by manufacturer).

8.Always wear safety glasses or eye shields during op- eration or while performing an adjustment or repair to protect eyes from foreign objects that may be thrown from the machine.

Operation

1.Do not put hands or feet near or under rotating parts. Keep clear of the discharge opening at all times.

2.Exercise extreme caution when operating on or cross- ing gravel drives, walks, or roads. Stay alert for hidden hazards or traffic.

3.After striking a foreign object, stop the engine (motor), remove the wire from the spark plug, disconnect the cord on electric motors, thoroughly inspect the snow thrower for any damage, and repair the damage before restarting and operating the snow thrower.

4.If the unit should start to vibrate abnormally, stop the engine (motor) and check immediately for the cause. Vibration is generally a warning of trouble.

5.Stop the engine (motor) whenever you leave the oper- ating position, before unclogging the collector/impeller housing or discharge chute, and when making any

2

repairs, adjustments or inspections.

 

Page 2
Image 2
Poulan 436132, 96192004200 owner manual Safe Operation Practices for Walk-Behind Snow Throwers

96192004200, 436132 specifications

The Poulan 436132,96192004200 is a reliable chainsaw designed to cater to both novice users and professionals alike. Known for its robust performance and user-friendly features, this chainsaw stands out in a crowded market, making it a preferred choice for those tackling various tasks, from tree trimming and yard work to more intricate woodcutting projects.

One of the main features of the Poulan 436132 is its powerful engine. With a displacement of 42cc, the chainsaw delivers sufficient power to handle demanding cutting tasks with ease. This convenient combination of power and efficiency allows users to cut through dense wood without experiencing any significant loss of performance. The engine's design promotes fuel efficiency, ensuring that operators can work longer without frequent refueling.

The Poulan 436132 is also equipped with a lightweight construction, which significantly enhances user maneuverability. Weighing just under 10 pounds, this chainsaw reduces fatigue during extended periods of use, making it suitable for larger projects without compromising comfort. The ergonomic handle design further contributes to user comfort, allowing for a secure grip that minimizes vibrations, thus enhancing control and precision.

Safety is a critical aspect of chainsaw design, and this model does not disappoint. It incorporates a chain brake system that halts the chain's motion in the event of kickback, protecting the user from potential injuries. Additionally, the tool includes a throttle lock, which prevents accidental starts, adding an extra layer of security for novice users.

The chainsaw features an automatic oiling system that keeps the chain lubricated, reducing wear and tear while ensuring smooth operation. This system fosters reduced maintenance needs, enabling users to focus more on their projects rather than spend time on upkeep.

Another notable characteristic is the easy access to the air filter and spark plug, simplifying maintenance tasks. This intuitive design allows users to keep the chainsaw in top condition without requiring specialized tools or extensive mechanical knowledge.

In summary, the Poulan 436132,96192004200 is a versatile and dependable chainsaw that fuses power, comfort, and safety. With its user-friendly features and advanced technologies, it remains an excellent choice for those in search of a reliable cutting tool to assist in various woodwork tasks and yard maintenance. Whether for light-duty or more demanding applications, this chainsaw is engineered to deliver consistent performance with every use.