SERVICE AND ADJUSTMENTS

TRANSAXLE GEAR SHIFT LEVER NEUTRAL ADJUSTMENT (See Fig. 22)

The transaxle should be in neutral when the gear shift lever is in neutral (lock gate) position. The adjustment is preset at the factory; however, if adjustment is needed, proceed as follows:

Make sure transaxle is in neutral.

NOTE: When the tractor rear wheels move freely, the transaxle is in neutral.

Loosen adjustment bolt in front of the right rear wheel.

Position the gear shift lever in the neutral position.

Tighten adjustment bolt securely.

NOTE: If additional clearance is needed to get to adjustment bolt, move mower deck height to the lowest position.

 

NEUTRAL

GEARSHIFT LEVER

LOCK GATE

 

 

ADJUSTMENT

 

BOLT

Fig. 22

TO ADJUST STEERING WHEEL ALIGNMENT

If steering wheel crossbars are not horizontal (left to right) when wheels are positioned straight forward, remove steer- ing wheel and reassemble per instructions in the Assembly section of this manual.

FRONT WHEEL TOE-IN/CAMBER

Your new tractor front wheel toe-in and camber is set at the factory and is normal. The front wheel toe-in and camber are not adjustable. If damage has occurred to affect the factory set front wheel toe-in or camber, contact a qualified service center.

TO REMOVE WHEEL FOR REPAIRS (See Fig. 23)

RETAINING WASHERS

RING

AXLE

COVER

SQUARE KEY (REAR

WHEEL ONLY)

Fig. 23

TO START ENGINE WITH A WEAK BATTERY (See Fig. 24)

WARNING: Lead-acid batteries gen- erate explosive gases. Keep sparks, flame and smoking materials away from batteries. Always wear eye protection when around batteries.

If your battery is too weak to start the engine, it should be recharged. (See "BATTERY" in the Maintenance section of this manual).

If “jumper cables” are used for emergency starting, follow this procedure:

IMPORTANT: YOUR TRACTOR IS EQUIPPED WITH A 12 VOLT SYSTEM. THE OTHER VEHICLE MUST ALSO BE A 12 VOLT SYSTEM. DO NOT USE YOUR TRACTOR BATTERY TO START OTHER VEHICLES.

TO ATTACH JUMPER CABLES -

Connect one end of the RED cable to the POSITIVE

(+)terminal of each battery(A-B), taking care not to short against tractor chassis.

Connect one end of the BLACK cable to the NEGATIVE (-) terminal (C) of fully charged battery.

Connect the other end of the BLACK cable (D) to good chassis ground, away from fuel tank and battery.

TO REMOVE CABLES, REVERSE ORDER -

BLACK cable first from chassis and then from the fully charged battery.

RED cable last from both batteries.

Block up axle securely.

Remove axle cover, retaining ring and washers to allow wheel removal (rear wheel contains a square key - Do not lose).

Repair tire and reassemble.

On rear wheels only: align grooves in rear wheel hub and axle. Insert square key.

Replace washers and snap retaining ring securely in axle groove.

Replace axle cover.

NOTE: To seal tire punctures and prevent flat tires due to slow leaks, tire sealant may be purchased from your local

WEAK OR DEAD BATTERY

FULLY CHARGED

BATTERY

parts dealer. Tire sealant also prevents tire dry rot and corrosion.

Fig. 24

21

Page 21
Image 21
Poulan 438511, PO14542LT manual Transaxle Gear Shift Lever Neutral Adjustment See Fig, To Adjust Steering Wheel Alignment

96012011200, PO14542LT, 438511 specifications

The Poulan PO14542LT is a powerful and versatile lawn tractor designed to make yard care easier for homeowners. With its robust features and advanced technologies, this ride-on mower stands out as an excellent choice for those managing medium to large-sized lawns.

One of the main features of the Poulan PO14542LT is its 14.5 horsepower Briggs & Stratton engine. The engine provides reliable power to tackle tough mowing tasks, ensuring efficient cutting and handling of overgrown grass. Coupled with an automatic transmission, the tractor allows for smooth speed adjustments without the need for manual gear shifting, enhancing user convenience and comfort.

The cutting deck is another standout characteristic of the PO14542LT. With a 42-inch width, the deck is designed to deliver a clean and even cut, helping to reduce the number of passes required on your lawn. It also features a 3-in-1 cutting system that allows users to choose between mulching, bagging, or side discharge options, providing flexibility based on the specific needs of the lawn.

In terms of ergonomics, the Poulan PO14542LT is designed with the user in mind. The high-back seat provides comfort during long mowing sessions, while the easy-to-reach controls allow for effortless operation. The steering wheel is designed for ease of maneuverability, making it simple to navigate around obstacles in the yard.

Safety is a priority in the design of this tractor. The PO14542LT comes equipped with a safety switch that ensures the engine will shut off if the operator leaves the seat while the mower is engaged. Additionally, the tractor includes oversized batteries and an efficient fuel economy, allowing for extended operation between refuels.

Poulan also incorporates advanced technologies into the PO14542LT. The dual-blade cutting system enhances grass chopping capabilities, promoting healthier lawn growth by finely cutting the grass clippings that are returned to the soil. This, combined with the mulching capability, supports environmentally friendly yard maintenance.

In conclusion, the Poulan PO14542LT is an impressive lawn tractor that excels in performance, comfort, and versatility. Its combination of power, user-friendly features, and safety mechanisms makes it an ideal companion for homeowners seeking to achieve a beautifully maintained lawn with minimal effort. Whether it’s routine mowing or tackling tougher terrains, the PO14542LT proves to be a reliable choice for any lawn care endeavor.