operation
Manual Transport
When pushing or pulling the mower, engage the EZT (Integrated Zeroturn Transaxle) bypass linkages. The EZT bypass linkages are located on the rear of the frame, below the rear engine guard.
1. Raise the deck into the highest cutting position.
2. Pull the EZT bypass linkages up and out of the keyhole slots. Release the levers with the head outside the frame and held in the bypass position.
3.To reengage the EZT’s to drive, reverse the above procedure.
Bypass linkage, EZT engaged
Bypass linkage, EZT locked in the bypass position
33
