SAs tree starts to fall, stop saw, put it down, and get away quickly on your planned re-

treat path.

S DO NOT cut down a partially fallen tree with your saw. Be extremely cautious with partially fallen trees that may be poorly supported. When a tree doesn’t fall com- pletely, set the saw aside and pull down the tree with a cable winch, block and tackle, or tractor.

CUTTING A FALLEN TREE

(BUCKING)

Bucking is the term used for cutting a fallen tree to the desired log size.

WARNING: Do not stand on the log being cut. Any portion can roll causing loss of footing and control. Do not stand downhill of the log being cut.

IMPORTANT POINTS

SCut only one log at a time.

SCut shattered wood very carefully; sharp pieces of wood could be flung toward oper- ator.

SUse a sawhorse to cut small logs. Never allow another person to hold the log while cutting and never hold the log with your leg or foot.

S Do not cut in an area where logs, limbs, and roots are tangled such as in a blown down area. Drag the logs into a clear area before cutting by pulling out exposed and cleared logs first.

TYPES OF CUTTING USED FOR BUCKING

WARNING: If saw becomes pinched or hung in a log, don’t try to force it out. You can lose control of the saw resulting in injury and/or damage to the saw. Stop the saw, drive a wedge of plastic or wood into the cut until the saw can be removed easily. Re- start the saw and carefully reenter the cut. To avoid kickback and chain damage, do not use a metal wedge. Do not attempt to restart your saw when it is pinched or hung in a log.

Undercutting involves cutting on the under- side of the log with top of saw against the log. When undercutting use light upward pres- sure. Hold saw firmly and maintain control. The saw will tend to push back toward you.

WARNING: Never turn saw upside down to undercut. The saw cannot be con- trolled in this position.

Always make your first cut on the compres- sion side of the log. The compression side of the log is where the pressure of the log’s weight is concentrated.

First cut on compression side of log

Second cut

Second cut

First cut on compression side of log

BUCKING WITHOUT A SUPPORT

SOvercut through 1/3 of the diameter of the log.

SRoll the log over and finish with a second overcut.

SWatch for logs with a compression side to prevent the saw from pinching. See il- lustrations for cutting logs with a compres- sion side.

BUCKING USING A LOG OR SUPPORT STAND

SRemember your first cut is always on the compression side of the log.

(Refer to the illustrations below for your first and second cut)

S Your first cut should extend 1/3 of the diameter of the log.

S Finish with your second cut.

Use a wedge to remove pinched saw

Turn saw OFF and use a plastic or wooden wedge to force cut open.

Overcutting begins on the top side of the log with the bottom of the saw against the log. When overcutting use light downward pres- sure.

Overcutting

Undercutting

Using a log for support

2nd Cut

1st Cut

1st Cut

2nd Cut

12

Page 11 Page 13
Page 12
Image 12
Poulan 530086528 instruction manual Cutting a Fallen Tree, Types of Cutting Used for Bucking, Bucking Without a Support
Page 11 Page 13

530086528 specifications

The Poulan 530086528 is a highly regarded tool in the world of outdoor power equipment, particularly known for its reliable performance and efficiency in lawn maintenance tasks. This versatile product is engineered with a host of innovative features and technologies that cater to both professional landscapers and homeowners alike.

One of the standout characteristics of the Poulan 530086528 is its robust engine, designed to provide ample power for a wide array of trimming and cutting applications. This engine is capable of handling various types of vegetation, making it an ideal choice for tackling everything from grassy patches to dense brush. Moreover, it operates efficiently, reducing fuel consumption without compromising on performance. This fuel efficiency not only saves costs in the long run but also minimizes the environmental impact, a feature that is increasingly important to eco-conscious users.

The design of the Poulan 530086528 incorporates user-friendly elements aimed at enhancing the overall experience. The lightweight construction ensures that users can maneuver the device with ease, reducing fatigue during extended use. Additionally, the ergonomic handle is designed to offer a comfortable grip, promoting better control and precision when cutting varied terrains.

Another key aspect of the Poulan 530086528 is its advanced starting system. It is equipped with a simple-to-use pull start mechanism that significantly reduces the effort required to get the engine running. This feature is particularly valuable for novice users who may struggle with traditional starting methods.

Durability is a critical consideration in the design of the Poulan 530086528. The materials used are engineered to withstand the rigors of frequent use, ensuring that the machine can endure tough conditions without deterioration. Furthermore, regular maintenance is made easier thanks to accessible components, allowing users to perform necessary checks and repairs with minimal hassle.

In terms of versatility, the Poulan 530086528 offers interchangeable attachments that can adapt to various tasks, such as edging, trimming, and even blowing debris. This adaptability extends the functionality of the device, making it a valuable addition to any landscaping toolkit.

In summary, the Poulan 530086528 combines power, efficiency, and user-friendliness, making it a leading choice for outdoor maintenance. Its dependable design, ergonomic features, and multi-tasking capabilities firmly position it as an essential tool for anyone looking to maintain a pristine outdoor space.
Top Page Image Contents