SCarefully plan your sawing operation in ad- vance. Do not start cutting until you have a clear work area, secure footing, and, if you are felling trees, a planned retreat path.

OPERATE YOUR SAW SAFELY

SDo not operate a chain saw with one hand. Serious injury to the operator, helpers, by- standers or any combination of these per- sons may result from one-handed opera- tion. A chain saw is intended for two-handed use.

SOperate the chain saw only in a well-venti- lated outdoor area.

SDo not operate saw from a ladder or in a

tree.

SMake sure the chain will not make contact with any object while starting the engine. Never try to start the saw when the guide

bar is in a cut.

SDo not put pressure on the saw at the end of the cut. Applying pressure can cause you to lose control when the cut is com-

pleted.

S Stop the engine before setting the saw down.

SDo not operate a chain saw that is dam- aged, improperly adjusted, or not com- pletely and securely assembled. Always replace bar, chain, hand guard, or chain brake immediately if it becomes damaged,

broken or is otherwise removed.

S With the engine stopped, hand carry the chain saw with the muffler away from your body, and the guide bar and chain to the rear, preferably covered with a scabbard.

MAINTAIN YOUR SAW IN GOOD WORKING ORDER

SHave all chain saw service performed by a qualified service dealer with the exception of the items listed in the maintenance sec- tion of this manual. For example, if improp- er tools are used to remove or hold the fly- wheel when servicing the clutch, structural

damage to the flywheel can occur and cause the flywheel to burst.

SMake certain the saw chain stops moving when the throttle trigger is released. For correction, refer to CARBURETOR AD-

JUSTMENTS.

SNever modify your saw in any way.

SKeep the handles dry, clean, and free of oil

or fuel mixture.

SKeep fuel and oil caps, screws, and fas-

teners securely tightened.

SUse only Poulan PROR accessories and replacement parts as recommended.

HANDLE FUEL WITH CAUTION

SDo not smoke while handling fuel or while operating the saw.

SEliminate all sources of sparks or flame in the areas where fuel is mixed or poured. There should be no smoking, open flames, or work that could cause sparks. Allow en-

gine to cool before refueling.

S Mix and pour fuel in an outdoor area on bare ground; store fuel in a cool, dry, well ventilated place; and use an approved,

marked container for all fuel purposes. Wipe up all fuel spills before starting saw.

SMove at least 10 feet (3 meters) from fuel-

ing site before starting engine.

STurn the engine off and let saw cool in a non-combustible area, not on dry leaves, straw, paper, etc. Slowly remove fuel cap

and refuel unit.

SStore the unit and fuel in an area where fuel vapors cannot reach sparks or open flames from water heaters, electric motors or switches, furnaces, etc.

KICKBACK

WARNING: Avoid kickback which can result in serious injury. Kickback is the backward, upward or sudden forward motion of the guide bar occurring when the saw chain near the upper tip of the guide bar con- tacts any object such as a log or branch, or when the wood closes in and pinches the saw chain in the cut. Contacting a foreign ob- ject in the wood can also result in loss of chain saw control.

SRotational Kickback can occur when the moving chain contacts an object at the up- per tip of the guide bar. This contact can cause the chain to dig into the object, which stops the chain for an instant. The result is a lightning fast, reverse reaction which kicks the guide bar up and back to- ward the operator.

SPinch-Kickbackcan occur when the the wood closes in and pinches the moving saw chain in the cut along the top of the guide bar and the saw chain is suddenly stopped. This sudden stopping of the chain results in a reversal of the chain force used to cut wood and causes the saw to move in the opposite direction of the chain rotation. The saw is driven straight back toward the operator.

SPull-Incan occur when the moving chain contacts a foreign object in the wood in the cut along the bottom of the guide bar and the saw chain is suddenly stopped. This sudden stopping pulls the saw forward and away from the operator and could easily cause the operator to lose control of the saw.

Avoid Pinch-Kickback:

S Be extremely aware of situations or ob- structions that can cause material to pinch the top of or otherwise stop the chain.

SDo not cut more than one log at a time.

S Do not twist the saw as the bar is with- drawn from an undercut when bucking.

Avoid Pull-In:

SAlways begin cutting with the engine at full speed and the saw housing against wood.

S Use wedges made of plastic or wood. Never use metal to hold the cut open.

Kickback Path

3

Page 2 Page 4
Page 3
Image 3
Poulan 530163637 Operate Your SAW Safely, Maintain Your SAW in Good Working Order, Handle Fuel with Caution, Kickback
Page 2 Page 4

530163637 specifications

The Poulan 530163637 is an innovative tool designed for outdoor enthusiasts and professionals alike. Engineered for versatility and efficiency, this unit showcases a range of features that set it apart in the market of power equipment.

One of the standout aspects of the Poulan 530163637 is its powerful engine. It is equipped with a robust 2-cycle engine, which provides ample power to tackle a variety of cutting tasks, from trimming grass to tackling dense brush. The engine’s efficient design not only maximizes cutting performance but also ensures lower fuel consumption, making it an environmentally friendly option for users.

The tool features an easy-to-use, lightweight design that allows for extended periods of use without causing fatigue. Weighing in at a user-friendly level, the Poulan 530163637 ensures that both amateur gardeners and professional landscapers can navigate their work effortlessly. The ergonomic handle enhances comfort and control, reducing the risk of strain during prolonged operation.

Another key characteristic of the Poulan 530163637 is its start technology. The tool employs a reliable starting mechanism that helps users start it on the first pull. This feature is particularly beneficial for those who are less experienced with power equipment, as it minimizes the frustration that often accompanies starting traditional equipment.

The Poulan 530163637 also incorporates advanced cutting technologies, including dual-line feed systems that allow for efficient and precise cutting. This feature ensures that grass and weeds are trimmed quickly and evenly, enhancing the overall aesthetics of lawns and gardens.

The durability of the Poulan 530163637 is another important factor to consider. Constructed from high-quality materials, it is designed to withstand the rigors of outdoor use. The maintenance-friendly design allows for easy access to key components, making routine maintenance tasks like oil changes and air filter replacements straightforward for users.

In summary, the Poulan 530163637 is a powerful, user-friendly outdoor tool designed for efficiency and ease of use. Its combination of a robust engine, lightweight build, advanced cutting technologies, and durable construction makes it an excellent choice for anyone looking to maintain their outdoor spaces effectively. Whether you are a casual gardener or a landscaping professional, the Poulan 530163637 promises to deliver performance and reliability in every application.
Top Page Image Contents