If the unit still doesn’t start, refer to TROUBLESHOOTING TABLE or call 1-800-554-6723.

OPERATING THE COUPLER

This model is equipped with a coupler which enables optional attachments to be installed. The optional attachments are:

MODEL:

Edger . . . . . . . . . . . . . . . . . . . . . . .PP1000E Cultivator . . . . . . . . . . . . . . . . . . . .PP2000T Blower . . . . . . . . . . . . . . . . . . . . . .PP3000B Brushcutter . . . . . . . . . . . . . . . . . . PP4000C Pruner . . . . . . . . . . . . . . . . . . . . . .PP5000P

WARNING: Always stop unit and dis- connect spark plug before removing or instal- ling attachments.

REMOVING TRIMMER ATTACH- MENT (OR OTHER OPTIONAL AT- TACHMENTS)

CAUTION: When removing or installing at- tachments, place the unit on a flat surface for stability.

1.Loosen the coupler by turning the knob counterclockwise.

Upper Tube

Coupler

Coupler Primary Hole

Guide Recess

Upper Locking/ Attachment

Tube Release

Button

WARNING: Make sure the locking/ release button is locked in the primary hole and the knob is securely tightened before op- erating the unit.

OPERATING POSITION

Lower

LOOSEN

Attachment

TIGHTEN Knob

2. Press and hold the locking/release button.

Locking/Release Button

Coupler

Upper Tube

Lower Attachment

 

3.While securely holding the engine and upper tube, pull the attachment straight out of the coupler.

INSTALLING OPTIONAL ATTACH- MENTS

1.Remove the tube cap from the attach- ment (if present).

2.Position locking/release button of attach- ment into guide recess of coupler.

3.Push the attachment into the coupler until the locking/release button snaps into the primary hole.

4.Before using the unit, tighten the knob se- curely by turning clockwise.

Cut from your left to your right.

WARNING: Always wear eye protec- tion. Never lean over the trimmer head. Rocks or debris can ricochet or be thrown into eyes and face and cause blindness or other serious injury.

Do not run the engine at a higher speed than necessary. The cutting line will cut efficiently when the engine is run at less than full throttle. At lower speeds, there is less engine noise and vibration. The cutting line will last longer and will be less likely to “weld” onto the spool. Always release the throttle trigger and allow the engine to return to idle speed when not cutting. To stop engine:

SRelease the throttle trigger.

SMove the ON/OFF switch to the OFF posi- tion.

TRIMMER LINE ADVANCE

The trimmer line will advance approximately 2 in. (5 cm) each time the bottom of the trimmer head is tapped on the ground with the engine running at full throttle.

The most efficient line length is the maximum length allowed by the line limiter.

Always keep the shield in place when the tool is being operated.

To advance line:

SOperate the engine at full throttle.

SHold the trimmer head parallel to and above the grassy area.

10

Page 9 Page 11
Page 10
Image 10
Poulan 530163731 Operating the Coupler, Operating Position, Installing Optional ATTACH- Ments, Trimmer Line Advance
Page 9 Page 11

530163731 specifications

The Poulan 530163731 is a powerful and versatile chainsaw designed for both professional landscapers and DIY enthusiasts. This model stands out in the market due to its reliable performance, innovative features, and user-friendly design, making it an excellent choice for a wide range of cutting tasks.

One of the main features of the Poulan 530163731 is its robust engine. The chainsaw is equipped with a high-performance 40cc two-stroke engine, which delivers impressive power to tackle tough cutting jobs. This engine is designed for efficiency, ensuring that users can cut through various types of wood with ease. Additionally, the chainsaw’s speed and performance can significantly improve productivity, making it a go-to tool for anyone needing to clear trees, prune branches, or perform general yard maintenance.

Another key characteristic of the Poulan 530163731 is its lightweight construction. Weighing in at just under 10 pounds, this chainsaw is designed for easy maneuverability, reducing user fatigue during extended periods of use. This feature is particularly beneficial for those who may need to operate the chainsaw in tight spaces or for long durations.

The Poulan 530163731 also incorporates several advanced technologies that enhance both safety and performance. It features an automatic chain oiler, which continuously lubricates the chain, prolonging its life and ensuring smooth operation. This technology is essential for maintaining the chainsaw in peak condition, requiring less maintenance from the user.

Moreover, the chainsaw comes equipped with an easy-start system that allows users to start the engine with minimal effort. This is especially advantageous for those who may struggle with traditional starting mechanisms, making it accessible to a broader audience.

Safety is paramount in the design of the Poulan 530163731. It features a chain brake that activates in the event of kickback, providing an additional layer of protection for the user. The ergonomic handle ensures a secure grip, promoting safe usage even in challenging working conditions.

The Poulan 530163731 chainsaw is a well-rounded tool that combines power, ease of use, and advanced safety features. With its lightweight design, efficient engine, and user-focused technologies, it is a reliable option for anyone needing a dependable chainsaw for a variety of tasks in their outdoor projects. Whether for professional use or home improvement, the Poulan 530163731 is a standout choice.
Top Page Image Contents