IMPORTANT POINTS

SUse the minimum throttle speed necessary to effectively cut hedges for optimal hedge

trimmer performance.

SNever attempt to use this hedge trimmer to cut hedges that have any branches with a diameter larger than 5/8∀ (1.5 cm).

OPERATING POSITION

Hearing

Protection Eye

Protection

STOPPING YOUR ENGINE

D To stop the engine, move the ON/OFF switch to the OFF position.

SIf engine does not stop, move choke lever to the FULL CHOKE position.

STARTING YOUR ENGINE

DFuel engine. Move at least 10 feet (3 me- ters) away from the fueling site.

DRemove the blade cover from the blade before starting the unit.

DHold the unit on the ground in the starting position as shown. Support unit so the blade is off of the ground and away from trees, bushes, onlookers, etc.

HELPFUL TIP

If your engine still does not start after following these instructions, please call 1-800-554-6723.

STARTING A COLD ENGINE (or a warm engine after running out of fuel)

WARNING: The cutting blade will be moving once the throttle lock has been set and the engine is started. Wear your protec- tive equipment and observe all safety instruc- tions.

ON/OFF

Throttle Lock

Switch

 

Throttle Lock-out

Throttle

Trigger

1. Move the ON/OFF switch to the ON posi- tion.

2. Engage the throttle lock as follows: D press the throttle lock--out;

D squeeze and hold throttle trigger; D press and hold throttle lock, then D release the throttle trigger

NOTE: Keep the throttle lock engaged until the engine starts.

3.Slowly press the primer bulb 6 times.

4.Move the choke lever to the FULLCHOKE position.

Primer Bulb

Choke

 

 

Lever

5. Pull starter rope handle sharply until en- gine sounds as if it is trying to run, but do not pull rope more than 6 times.

6. Move the choke lever to the HALF CHOKE position.

7. Pull starter rope sharply until the engine runs, but no more than 6 pulls.

NOTE: If the engine doesn’t start after 6 pulls (at the HALF CHOKE position), check to make sure the ON/OFF switch is in the ON position. Move the choke lever to the FULL CHOKE position and press the primer bulb 6 times; pull the starter rope 2 more times. Move the choke lever to the HALF CHOKE position and pull the starter rope until the en- gine runs, but no more than 6 more pulls. If the engine still doesn’t start, it is probably flooded. Proceed to STARTING A FLOODED ENGINE.

8.Once the engine starts, allow the engine to run 10 seconds, then move the choke lever to the OFF CHOKE position. Allow the unit to run for 30 more seconds at the OFF CHOKE position before squeezing and releasing the throttle trigger to release the throttle lock.

NOTE: If engine dies with the choke lever in the OFF CHOKE position, move the choke lever to the HALF CHOKE position and pull the rope until the engine runs, but no more than 6 pulls.

-- 5 --

Page 4 Page 6
Page 5
Image 5
Poulan 530163900 Important Points, Operating Position, Stopping Your Engine, Starting Your Engine, On/Off
Page 4 Page 6

530163900 specifications

The Poulan 530163900 is a highly regarded replacement carburetor designed for various chainsaw models and small engine applications. This carburetor is known for its reliability and efficiency, making it an essential component for those who rely on small engine equipment for their professional or recreational needs.

One of the main features of the Poulan 530163900 is its compatibility with a wide range of Poulan chainsaws and other small engines. This versatility ensures that users can easily find a suitable replacement when their original carburetor begins to show signs of wear or malperformance. The carburetor is constructed from durable materials, providing longevity and excellent performance even in demanding conditions.

The Poulan 530163900 incorporates advanced fuel delivery technologies that optimize engine performance. It features a well-designed fuel metering system that helps maintain the right air-fuel mixture for efficient combustion. This technology not only enhances power output but also improves fuel efficiency, allowing users to maximize their operational time while minimizing fuel costs.

Another noteworthy characteristic of this carburetor is its user-friendly design, which facilitates easy installation and maintenance. The Poulan 530163900 comes with clear instructions, allowing individuals with basic mechanical skills to replace their old carburetor without requiring specialized tools or professional assistance. This feature is particularly beneficial for those who prefer to conduct their repairs and maintenance at home.

Additionally, the carburetor is built to withstand the rigors of outdoor work. Its robust construction ensures resistance to various environmental factors, including vibrations, temperature fluctuations, and exposure to fuel mixtures. This durability makes the Poulan 530163900 a dependable choice for those working in challenging conditions.

In conclusion, the Poulan 530163900 carburetor is an essential component for maintaining the performance and efficiency of chainsaws and other small engines. With its compatibility, advanced fuel delivery technologies, user-friendly design, and durability, it stands out as a reliable replacement option. For anyone looking to restore their equipment to optimal performance, the Poulan 530163900 is a smart investment that delivers value and reliability.
Top Page Image Contents